Pinnacle USB Stick 2870
Hi Dear Members!
I am trying to get my Pinnacle PCTV USB (DVB-T device [eb1a:2870]) to work on my Slackware 12.1 Linux. I fetched sources from http://linuxtv.org/hg/v4l-dvb and then did a make, make install and make load. After the reboot I did try tvtime. A blank screen is appear there no picture. Here is my dmesg logs. usb 1-6: new high speed USB device using ehci_hcd and address 3 usb 1-6: configuration #1 chosen from 1 choice em28xx: New device USB 2870 Device @ 480 Mbps (eb1a:2870, interface 0, class 0) em28xx #0: Identified as Pinnacle PCTV USB 2 (card=3) em28xx #0: em28xx chip ID = 35 Chip ID is not zero. It is not a TEA5767 tuner' 2-0060: chip found @ 0xc0 (em28xx #0) em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 70 28 c0 12 81 00 6a 22 00 00 em28xx #0: i2c eeprom 10: 00 00 04 57 02 0d 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 44 00 00 00 f0 10 02 00 00 00 00 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 9f 4f a5 4a em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 37 00 30 00 20 00 44 00 em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xcf6a1fc3 em28xx #0: EEPROM info: em28xx #0: No audio on board. em28xx #0: 500mA max power em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 tuner-simple 2-0060: creating new instance tuner-simple 2-0060: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) em28xx #0: Config register raw data: 0xc0 em28xx #0: No AC97 audio processor em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger Please help what should i do? Regards, Umar |
All times are GMT -5. The time now is 11:24 AM. |