Hi,
I have a problem with a Pinnacle Hybrid Pro USB in OpenSuse 11 which I can configure via Yast, but no channels found with Kaffeine
Some advice, please ?
Thanks
lsmod |grep em28
Code:
em28xx_dvb 12332 0
em28xx 105848 1 em28xx_dvb
dvb_core 118352 1 em28xx_dvb
ir_common 53772 1 em28xx
v4l2_common 23400 3 em28xx,tuner,tvp5150
videodev 46848 4 em28xx,tuner,tvp5150,v4l2_common
videobuf_vmalloc 9100 1 em28xx
videobuf_core 24044 2 em28xx,videobuf_vmalloc
tveeprom 15212 1 em28xx
dmesg | grep video
Code:
[ 0.462343] pci 0000:05:00.0: Boot video device
[ 7.515030] Linux video capture interface: v2.00
[ 7.616420] em28xx #0: Identified as Unknown EM2750/28xx video grabber (card=1)
[ 8.343933] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 579.522510] em28xx #0: disconnecting em28xx #0 video
[ 579.523554] em28xx #0: V4L2 device /dev/video0 deregistered
[ 717.217982] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
dmesg | grep tuner
Code:
[ 7.760995] tuner 2-0061: chip found @ 0xc2 (em28xx #0)
[ 8.081685] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 8.843783] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 716.979586] tuner 2-0061: chip found @ 0xc2 (em28xx #0)
[ 716.979893] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 717.397275] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
[ 2627.552148] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
scantv -c /dev/video0 -C /dev/vbi0
Code:
please select your TV norm
0: NTSC
1: NTSC-M
2: NTSC-M-JP
3: NTSC-M-KR
4: NTSC-443
5: PAL
6: PAL-BG
7: PAL-H
8: PAL-I
9: PAL-DK
10: PAL-M
11: PAL-N
12: PAL-Nc
13: PAL-60
14: SECAM
15: SECAM-B
nr ? ----- > SELECCIONO 6
please select a frequency table
0: us-bcast
1: us-cable
2: us-cable-hrc
3: japan-bcast
4: japan-cable
5: europe-west
6: europe-east
7: italy
8: newzealand
9: australia
10: ireland
11: france
12: china-bcast
13: southafrica
14: argentina
15: australia-optus
16: russia
nr ? -----> SELECCIONO 5
[global]
freqtab = europe-west
[defaults]
input = Television
norm = PAL-BG
vbi: open failed [/dev/vbi0]
open /dev/vbi0: Invalid argument
