LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   PCMCIA Silicom dual serial port problem (https://www.linuxquestions.org/questions/linux-hardware-18/pcmcia-silicom-dual-serial-port-problem-159331/)

Camiel 03-18-2004 05:14 AM

PCMCIA Silicom dual serial port problem
 
I can't get a PCMCIA Silicom Dual RS-232 serial port card to work.

Module serial_cs is loaded and dmesg says:

ttyS18 at 0x0110 (irq =5) is a 16550A
ttyS19 at 0x0118 (irq =5) is a 16550A

So far okay?

echo test > /dev/ttyS18 gives output on first port on the card,

echo test > /dev/ttyS19 however also on the first port!!

The second port seems 'dead': no signals active at all (with LED tester)

Is module serial_cs actually suitable? Extra parameters needed?

the card is mentioned in /etc/pcmcia/config
card "Silicom 2S100 Dual Serial"
manfid 0x0089, 0x0301
bind "serial_cs"


Anyone?

Camiel

MaxMus 10-16-2010 11:29 PM

serial PCMCIA card
 
I had same problem, contacted www.usconverters.com, they have several models of the serial PCMCIA card , and also many other USB serial adapter products. Highly recommended.


All times are GMT -5. The time now is 02:54 PM.