I'm kinda new to this whole Linux thing, and I've stumbled across a problem that seems unsolvable to me.
I'm trying to get my alcatel speedtouch usb modem to work through a pci-usb card. The card itself is detected (I think) but it doesn't seem to register any hardware that I plug into it.
(I'm using Mandrake 9 as my distro)
After digging around on this forum, I've found some commands that might give you an idea as to what's going on.
--> lspci -v gives the following :
Quote:
00:02.0 USB controller : ALI Corporation USB 1.1 controller ( rev 03) (prog-if 10 [OHCI])
FLAGS : BUS MASTER , MEDIUM DEVSEL, LATENCY 32, IRQ 9
Capabilities : [60] Power management version 2
00.0b.0 USB controller : Via Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI])
Subsystem : VIA technologies, Inc. (wrong ID) USB controller
Flags : bus master , medium devsel , latency 32 , Irq 12
I/O ports at e800 [size = 32]
Capabilities : [80] power management version 2
00.0b.1 USB controller : Via Technologies, Inc. USB (rev 50) (prog-if 00 [UHCI])
Subsystem : VIA technologies, Inc. (wrong ID) USB controller
Flags : bus master , medium devsel , latency 32 , Irq 12
I/O ports at e800 [size = 32]
Capabilities : [80] power management version 2
00:0b.2 USB controller : Via Technologies, Inc. USB (rev 51) (prog-if 20 [EHCI])
Subsystem : VIA technologies, Inc. (wrong ID) unknown device 1234
Flags : bus master , medium devsel , latency 32 , Irq 5
memory at e6000000(32-bit, non prefetchable) [size=256]
Capabilities: [80] Power Management version 2
|
(It seems to go wrong somewhere in those last 2 entries)
--> lsusb -v gives the following output :
Quote:
Invalid product/subclass spec at line 2650
Bus 004 Device 001: ID 0000:0000
Device Descripter:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 HUB
bDeviceSubClass 0 RootHub
bDeviceProtocol 0
bMaxPacketsize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB OHCI root Hub
iSerial 1 d0d3200
bNumconfigurations 1
Configuration descripter :
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
SelfPowered
MaxPower 0ma
InterfaceDescriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndPoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Root Hub
bInterfaceProtocol 0
iInterface 0
EndPoint Descriptor:
bLength 7
bDescriptorType 5
bEndPointAdress 0x81 EP 1 IN
bmAttributes 3
TransferType Interrupt
SynchType none
wMaxPacketSize 2
bInterval 255
Language Ids: (lenght=4)
0000 (null)((null))
|
Any help/advice is welcome.
pci - usb card troubles
