P4 CPU-frequency won't work
 

I've tried for the last week to get CPU-frequency gov's working on my Toshiba 2435 laptop. I've read all the documentation and gone over the kernel config several dozen times and recompiled at least that many, but I can't get it to work. I found a blog post (can't remember the link, of course) in which a guy said that he got it working on the 2.6.5 sources. Before I invest all the time in reconfiguring my entire kernel, though, I figured I'd ask if anyone else had any ideas. The spec's of my machine are:

Toshiba Satellite 2435-S255
2.4 Pentium 4 (not P4-M, just plain P4)
40GB HD (IDE)
512 RAM (DDR? Not sure)
Slackware 11.0, using the 2.6.18 kernel from the install DVD.

Do you have model number for the CPU?

FYI, not all CPUs can scale their frequencies. You might want to look at intel's site, and read some documentation to make sure that you can do what you're trying to do.

Umm, no I don't, where could I get that? Thanks for the response, though.

What kernel are you running?

And in the future, I would recomend that you do a quick Google search on this stuff. I just did, and came across several people having the same problem, and they all show how to fix it.

Try using a newer kernel. If that doesn't work, you could try to over/under clock it.

Could be the support in the kernel not activated You seem to have checked this.
Could also be the module is not loaded. modprobe speedstep_centrino (for PentiumM and M4, don't know for 4)
At this point, you should have the procfs or sysfs interface visible:
Then you will need the userspace programs to influence the frequency

Thanks...
 

Thanks for all the help guys, to all appearances I've got it working now.