LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 07-06-2004, 07:39 PM   #1
kaltag
LQ Newbie
 
Registered: May 2003
Location: 192.168.0.103
Distribution: Slackware 10/Gentoo
Posts: 26

Rep: Reputation: 15
Old school All in Wonder support?


Good afternoon, I just put together a dedicated linux box to hone my skills and the only videocard I had lying around is my original ATI All in Wonder with 8MB of RAM. I'm curious if there is any way of getting dri working with this card and at least the possibility of getting the TV tuner or video in working? Thanks for any help you can give.
 
Old 07-06-2004, 08:16 PM   #2
heathpitts
Member
 
Registered: Feb 2003
Location: Florence, AL
Distribution: Debian
Posts: 157

Rep: Reputation: 30
Go to http://gatos.sourceforge.net/

They have drivers for getting tv input working on a lot of All-In-Wonder cards. However, I couldn't get the ATI.2 driver to compile under debian stable or testing running either a 2.4 or 2.6 kernel. If you do get it to compile, please post how you accomplished it.
 
Old 07-06-2004, 10:34 PM   #3
kaltag
LQ Newbie
 
Registered: May 2003
Location: 192.168.0.103
Distribution: Slackware 10/Gentoo
Posts: 26

Original Poster
Rep: Reputation: 15
I downloaded their ati.2 binary driver for xfree 4.3 but I'm not sure if it's going to work since I'm using x.org as part of slackware 10. At any rate I followed their less than helpful instructions and nothing worked. X still comes up fine like it did before but there are errors in the x.log file about the drivers. I get a complaint from xawtv that there is no /dev/video0 too. I have enabled video for linux but with no driver selected because nothing in the list matched what I have and recompiled the kernel. Apparently that didn't do anything for me. Anyone else tried these yet and gotten anything? km fails to build as well.

edit: here is the x.log file

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/linux:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

Release Date: 18 December 2003
X Protocol Version 11, Revision 0, Release 6.7
Build Operating System: Linux 2.4.26 i686 [ELF]
Current Operating System: Linux linux 2.6.7 #3 Tue Jul 6 19:42:42 AKDT 2004 i686
Build Date: 05 June 2004
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jul 6 20:26:04 2004
(==) Using config file: "/etc/X11/xorg.conf"

Symbol xf86ForceHWCursor from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
Symbol xf86ForceHWCursor from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
Symbol xf86ForceHWCursor from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
Symbol xf86ForceHWCursor from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
xset: bad font path element (#58), possible causes are:
Directory does not exist or has wrong permissions
Directory missing fonts.dir
Incorrect font server address or syntax
startkde: Starting up...
ksplash: WARNING: KGenericFactory: instance requested but no instance name passed to the constructor!
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
kbuildsycoca running...
SetClientVersion: 0 8
QPixmap: Cannot create a QPixmap when no GUI is being used
QPixmap: Cannot create a QPixmap when no GUI is being used
kmixctrl: ERROR: Alsa mixer cannot be found.
Please check that the soundcard is installed and the
soundcard driver is loaded.
kmixctrl:
kmixctrl: ERROR: Alsa mixer cannot be found.
Please check that the soundcard is installed and the
soundcard driver is loaded.
kmixctrl:
ALSA lib pcm_hw.c:549snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pipe
ALSA lib pcm_hw.c:549snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pipe
ALSA lib pcm_hw.c:549snd_pcm_hw_start) SNDRV_PCM_IOCTL_START failed: Broken pipe
QFont::setPointSize: Point size <= 0 (-3)
kmix: ERROR: Alsa mixer cannot be found.
Please check that the soundcard is installed and the
soundcard driver is loaded.
kmix:
kmix: ERROR: Alsa mixer cannot be found.
Please check that the soundcard is installed and the
soundcard driver is loaded.
kmix:
konqueror: WARNING: KGenericFactory: instance requested but no instance name passed to the constructor!
Checking /dev/cdrom for cdrom...
Testing /dev/cdrom for cooked ioctl() interface
CDROM sensed: ATAPI compatible ATAPI CD-ROM MAX 54X

kio (KMimeType): WARNING: KServiceType:ffers : servicetype text/english not found
kio (KMimeType): WARNING: KServiceType:ffers : servicetype text/english not found

Here's the dmesg output:

Linux version 2.6.7 (root@linux) (gcc version 3.3.4) #3 Tue Jul 6 19:42:42 AKDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000cc000 - 00000000000d2000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000fb940
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa8e0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=302
Initializing CPU#0
CPU 0 irqstacks, hard=c0525000 soft=c0524000
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1867.311 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 514832k/524224k available (2929k kernel code, 8628k reserved, 1111k data, 184k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3670.01 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1866.0445 MHz.
..... host bus clock speed is 266.0635 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f78d0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x67bb, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
00:00:01[A] -> 2-16 -> IRQ 16 level low
00:00:01[B] -> 2-17 -> IRQ 17 level low
00:00:11[C] -> 2-22 -> IRQ 22 level low
00:00:11[D] -> 2-21 -> IRQ 21 level low
00:00:05[C] -> 2-18 -> IRQ 18 level low
00:00:05[D] -> 2-19 -> IRQ 19 level low
00:00:12[A] -> 2-23 -> IRQ 23 level low
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 A9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 C9
13 001 01 1 1 0 1 0 1 1 D1
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 C1
16 001 01 1 1 0 1 0 1 1 B9
17 001 01 1 1 0 1 0 1 1 D9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1
PCI: Using ACPI for IRQ routing
Machine check exception polling timer started.
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1089144072.4294965732:0): initialized
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
udf: registering filesystem
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1, 16 throttling states)
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA P4X266 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M, fd1 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
nbd: registered device at major 43
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xec00, 00:40:f4:30:54:48, IRQ 19
eth0: Identified 8139 chip type 'RTL-8139C'
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcio, hddMA
hda: WDC WD800JB-00CRA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdd: ATAPI CD-ROM MAX 54X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3 hda4
hdd: ATAPI 54X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
libata version 1.02 loaded.
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dfcff000-dfcff7ff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 21, pci mem e0841e00
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:02:08.2: NEC Corporation USB 2.0
ehci_hcd 0000:02:08.2: irq 19, pci mem e0843f00
ehci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:02:08.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000e000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 21, io base 0000e400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 21, io base 0000e800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
ALSA device list:
#0: Sound Fusion CS46xx at 0xdfffe000/0xdfe00000, irq 17
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ieee1394: Host added: ID:BUS[0-00:1023] GUID[005042b5c0008c32]
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 184k freed
Adding 257000k swap on /dev/hda1. Priority:-1 extents:1
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names



Last edited by kaltag; 07-06-2004 at 10:38 PM.
 
Old 07-07-2004, 12:24 PM   #4
kaltag
LQ Newbie
 
Registered: May 2003
Location: 192.168.0.103
Distribution: Slackware 10/Gentoo
Posts: 26

Original Poster
Rep: Reputation: 15
Ok slight progress. I changed the driver in xorg.conf file to "ati" from "vesa" and now xawtv will come up but no chanel works, it's just black. Mplayer still says there is no /dev/video0.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Rsync homework from school to home, and home to school RandomLinuxNewb Linux - Software 2 05-05-2006 04:41 AM
Killing in School TigerLinux General 14 11-09-2005 12:39 PM
Old school LQ scuzzman General 3 03-07-2005 06:33 AM
VB Help - sorry my school is making me use it =( Filsta Programming 2 06-05-2002 08:43 AM
school help robot182 Linux - General 3 04-13-2001 09:39 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 11:27 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration