Occasional fsck.ext3 Error at Boot Time - FC5
Ever since adding an external disk drive to my i386 FC5 box, I occasionally (not always) get:
Checking filesystems fsck.ext3: No such file or directory while trying to open /dev/sdb1 [FAILED] (Control-D to continue) at boot time. /dev/sdb1 is a 200Gb Maxtor "One Touch III" that I've plugged into one of the USB ports. I used fdisk to repartition the drive with one partition, then mke2fs -j to create an ext3 file system on /dev/sdb1. No problems were experienced with this. Then, /etc/fstab was edited to include the line: /dev/sdb1 /.snapshots ext3 defaults 0 2 When I type Ctrl-D, the box successfully boots, and df shows /dev/sdb1 is mounted on /.snapshots. Backup software successfully writes to /.snapshots. Can anyone assist with a resolution to this problem? And why does this problem only sometimes occure? (Not a show-stopper, but irritating...) I'm running Fedora Core 5, kernel 2.6.18-1.2257.fc5smp. TIA, Jon |
I used to experience that problem with my FC5 system and external Maxtor. I suspect it was a timing problem (the drive not being ready in time). The problem no longer occurs after I upgraded to FC6, so it looks like it was addressed.
|
Thanks, Macemoneta - I'll do the upgrade.
|
All times are GMT -5. The time now is 04:24 PM. |