LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   NVS 440 Quadhed Setup reboots when activating GPU2 (https://www.linuxquestions.org/questions/linux-hardware-18/nvs-440-quadhed-setup-reboots-when-activating-gpu2-790002/)

shaiss 02-18-2010 01:46 PM

NVS 440 Quadhed Setup reboots when activating GPU2
 
Running ubuntu 10.04 alpha 2.
Installed nvidia graphics 195.30 and 190.53 (same issue under either one)

Everything works fine with 2 monitors off the first GPU. However when you activate the 2 GPU with the xorg.conf file below and restart gdm you see x start to come up and the spinning orb, then the machine reboots. I've included as much info as I know, anyone have any ideas?

Everything works fine under Windows XP.


My xorg file working with 2 monitors
Code:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder58)  Fri Dec 18 18:36:44 PST 2009

Section "ServerLayout"
    Identifier    "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option        "Xinerama" "1"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier    "Mouse0"
    Driver        "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/psaux"
    Option        "Emulate3Buttons" "no"
    Option        "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier    "Keyboard0"
    Driver        "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier    "Monitor0"
    VendorName    "Unknown"
    ModelName      "DELL 2007FP"
    HorizSync      30.0 - 83.0
    VertRefresh    56.0 - 76.0
    Option        "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier    "Monitor1"
    VendorName    "Unknown"
    ModelName      "hp L2035"
    HorizSync      30.0 - 76.0
    VertRefresh    48.0 - 85.0
    Option        "DPMS"
EndSection

Section "Device"
    Identifier    "Device0"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "Quadro NVS 440"
    BusID          "PCI:98:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier    "Device1"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "Quadro NVS 440"
    BusID          "PCI:98:0:0"
    Screen          1
EndSection

Section "Screen"
    Identifier    "Screen0"
    Device        "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option        "TwinView" "0"
    Option        "metamodes" "DFP-0: 1600x1200_60 +0+0"
    SubSection    "Display"
        Depth      24
    EndSubSection
EndSection

Section "Screen"
    Identifier    "Screen1"
    Device        "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option        "TwinView" "0"
    Option        "metamodes" "DFP-1: 1600x1200_60 +0+0; DFP-1: 1024x768 +0+0"
    SubSection    "Display"
        Depth      24
    EndSubSection
EndSection

My xorg.conf not working with 3 monitors.
Code:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder58)  Fri Dec 18 18:36:44 PST 2009

Section "ServerLayout"
    Identifier    "Layout0"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" RightOf "Screen1"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option        "Xinerama" "1"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier    "Mouse0"
    Driver        "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/psaux"
    Option        "Emulate3Buttons" "no"
    Option        "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier    "Keyboard0"
    Driver        "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier    "Monitor0"
    VendorName    "Unknown"
    ModelName      "DELL 2007FP"
    HorizSync      30.0 - 83.0
    VertRefresh    56.0 - 76.0
    Option        "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier    "Monitor1"
    VendorName    "Unknown"
    ModelName      "hp L2035"
    HorizSync      30.0 - 76.0
    VertRefresh    48.0 - 85.0
    Option        "DPMS"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier    "Monitor2"
    VendorName    "Unknown"
    ModelName      "Samsung SyncMaster"
    HorizSync      30.0 - 81.0
    VertRefresh    56.0 - 75.0
    Option        "DPMS"
EndSection

Section "Device"
    Identifier    "Device0"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "Quadro NVS 440"
    BusID          "PCI:98:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier    "Device1"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "Quadro NVS 440"
    BusID          "PCI:98:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier    "Device2"
    Driver        "nvidia"
    VendorName    "NVIDIA Corporation"
    BoardName      "Quadro NVS 440"
    BusID          "PCI:99:0:0"
EndSection

Section "Screen"
    Identifier    "Screen0"
    Device        "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option        "TwinView" "0"
    Option        "metamodes" "DFP-0: 1600x1200_60 +0+0"
    SubSection    "Display"
        Depth      24
    EndSubSection
EndSection

Section "Screen"
    Identifier    "Screen1"
    Device        "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option        "TwinView" "0"
    Option        "metamodes" "DFP-1: 1600x1200_60 +0+0; DFP-1: 1024x768 +0+0"
    SubSection    "Display"
        Depth      24
    EndSubSection
EndSection

Section "Screen"
    Identifier    "Screen2"
    Device        "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option        "TwinView" "0"
    Option        "metamodes" "1600x1200_60 +0+0"
    SubSection    "Display"
        Depth      24
    EndSubSection
EndSection

cat /proc/driver/nvidia/cards/
Code:

shai@ShaiDesktop104:/etc/X11$ cat /proc/driver/nvidia/cards/0
Model:                  Quadro NVS 440
IRQ:                    28
Video BIOS:          05.43.02.88.03
Card Type:          PCI-E
DMA Size:          39 bits
DMA Mask:          0x7fffffffff
Bus Location:          62.00.0
shai@ShaiDesktop104:/etc/X11$ cat /proc/driver/nvidia/cards/1
Model:                  Quadro NVS 440
IRQ:                    36
Video BIOS:          05.43.02.88.03
Card Type:          PCI-E
DMA Size:          39 bits
DMA Mask:          0x7fffffffff
Bus Location:          63.00.0

Xorg.o.log
Code:


This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux ShaiDesktop104 2.6.32-10-generic #14-Ubuntu SMP Thu Jan 7 17:38:08 UTC 2010 x86_64
Kernel command line: auto BOOT_IMAGE=Linux ro root=/dev/sda1
Build Date: 19 January 2010  07:28:22AM
xorg-server 2:1.7.3.902-1ubuntu9 (buildd@)
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 18 11:16:51 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |  |-->Monitor "Monitor0"
(**) |  |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) |  |-->Monitor "Monitor1"
(**) |  |-->Device "Device1"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "1"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) Xinerama: enabled
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
        Entry deleted from font path.
(==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x7c72e0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:98:0:0) 10de:014a:10de:0234 nVidia Corporation NV43 [Quadro NVS 440] rev 162, Mem @ 0xf8000000/67108864, 0xd8000000/134217728, 0xfc000000/16777216
(--) PCI: (0:99:0:0) 10de:014a:10de:0234 nVidia Corporation NV43 [Quadro NVS 440] rev 162, Mem @ 0xf0000000/67108864, 0xd0000000/134217728, 0xf4000000/16777216
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Server Extension
(II) NVIDIA GLX Module  195.30  Fri Dec 18 17:09:18 PST 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
        compiled for 4.0.2, module version = 1.0.0
        Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  195.30  Fri Dec 18 16:24:01 PST 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 62@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: 1600x1200_60 +0+0"
(**) Feb 18 11:16:52 NVIDIA(0): Enabling RENDER acceleration
(II) Feb 18 11:16:52 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Feb 18 11:16:52 NVIDIA(0):    enabled.
(II) Feb 18 11:16:54 NVIDIA(0): NVIDIA GPU Quadro NVS 440 (NV43GL) at PCI:98:0:0 (GPU-0)
(--) Feb 18 11:16:54 NVIDIA(0): Memory: 131072 kBytes
(--) Feb 18 11:16:54 NVIDIA(0): VideoBIOS: 05.43.02.88.03
(II) Feb 18 11:16:54 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Feb 18 11:16:54 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Feb 18 11:16:54 NVIDIA(0): Connected display device(s) on Quadro NVS 440 at PCI:98:0:0:
(--) Feb 18 11:16:54 NVIDIA(0):    DELL 2007FP (DFP-0)
(--) Feb 18 11:16:54 NVIDIA(0):    hp L2035 (DFP-1)
(--) Feb 18 11:16:54 NVIDIA(0): DELL 2007FP (DFP-0): 155.0 MHz maximum pixel clock
(--) Feb 18 11:16:54 NVIDIA(0): DELL 2007FP (DFP-0): Internal Single Link TMDS
(--) Feb 18 11:16:54 NVIDIA(0): hp L2035 (DFP-1): 155.0 MHz maximum pixel clock
(--) Feb 18 11:16:54 NVIDIA(0): hp L2035 (DFP-1): Internal Single Link TMDS
(II) Feb 18 11:16:54 NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
(II) Feb 18 11:16:54 NVIDIA(0): Assigned Display Device: DFP-0
(II) Feb 18 11:16:54 NVIDIA(0): Validated modes:
(II) Feb 18 11:16:54 NVIDIA(0):    "DFP-0:1600x1200_60+0+0"
(II) Feb 18 11:16:54 NVIDIA(0): Virtual screen size determined to be 1600 x 1200
(--) Feb 18 11:16:54 NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) Feb 18 11:16:54 NVIDIA(0):    option
(==) Feb 18 11:16:54 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(1): Option "TwinView" "0"
(**) NVIDIA(1): Option "MetaModes" "DFP-1: 1600x1200_60 +0+0; DFP-1: 1024x768 +0+0"
(**) Feb 18 11:16:54 NVIDIA(1): Enabling RENDER acceleration
(II) Feb 18 11:16:54 NVIDIA(1): NVIDIA GPU Quadro NVS 440 (NV43GL) at PCI:98:0:0 (GPU-0)
(--) Feb 18 11:16:54 NVIDIA(1): Memory: 131072 kBytes
(--) Feb 18 11:16:54 NVIDIA(1): VideoBIOS: 05.43.02.88.03
(II) Feb 18 11:16:54 NVIDIA(1): Detected PCI Express Link width: 16X
(--) Feb 18 11:16:54 NVIDIA(1): Interlaced video modes are supported on this GPU
(--) Feb 18 11:16:54 NVIDIA(1): Connected display device(s) on Quadro NVS 440 at PCI:98:0:0:
(--) Feb 18 11:16:54 NVIDIA(1):    DELL 2007FP (DFP-0)
(--) Feb 18 11:16:54 NVIDIA(1):    hp L2035 (DFP-1)
(--) Feb 18 11:16:54 NVIDIA(1): DELL 2007FP (DFP-0): 155.0 MHz maximum pixel clock
(--) Feb 18 11:16:54 NVIDIA(1): DELL 2007FP (DFP-0): Internal Single Link TMDS
(--) Feb 18 11:16:54 NVIDIA(1): hp L2035 (DFP-1): 155.0 MHz maximum pixel clock
(--) Feb 18 11:16:54 NVIDIA(1): hp L2035 (DFP-1): Internal Single Link TMDS
(II) Feb 18 11:16:54 NVIDIA(1): Display Device found referenced in MetaMode: DFP-1
(WW) Feb 18 11:16:54 NVIDIA(1): The EDID for hp L2035 (DFP-1) contradicts itself: mode
(WW) Feb 18 11:16:54 NVIDIA(1):    "1280x1024" is specified in the EDID; however, the EDID's
(WW) Feb 18 11:16:54 NVIDIA(1):    valid HorizSync range (30.000-76.000 kHz) would exclude
(WW) Feb 18 11:16:54 NVIDIA(1):    this mode's HorizSync (80.0 kHz); ignoring HorizSync check
(WW) Feb 18 11:16:54 NVIDIA(1):    for mode "1280x1024".
(WW) Feb 18 11:16:54 NVIDIA(1): The EDID for hp L2035 (DFP-1) contradicts itself: mode
(WW) Feb 18 11:16:54 NVIDIA(1):    "1280x1024" is specified in the EDID; however, the EDID's
(WW) Feb 18 11:16:54 NVIDIA(1):    valid HorizSync range (30.000-76.000 kHz) would exclude
(WW) Feb 18 11:16:54 NVIDIA(1):    this mode's HorizSync (80.0 kHz); ignoring HorizSync check
(WW) Feb 18 11:16:54 NVIDIA(1):    for mode "1280x1024".
(II) Feb 18 11:16:54 NVIDIA(1): Assigned Display Device: DFP-1
(II) Feb 18 11:16:54 NVIDIA(1): Validated modes:
(II) Feb 18 11:16:54 NVIDIA(1):    "DFP-1:1600x1200_60+0+0"
(II) Feb 18 11:16:54 NVIDIA(1):    "DFP-1:1024x768+0+0"
(II) Feb 18 11:16:54 NVIDIA(1): Virtual screen size determined to be 1600 x 1200
(--) Feb 18 11:16:54 NVIDIA(1): DPI set to (99, 98); computed from "UseEdidDpi" X config
(--) Feb 18 11:16:54 NVIDIA(1):    option
(==) Feb 18 11:16:54 NVIDIA(1): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) Feb 18 11:16:55 NVIDIA(GPU-1): NVIDIA GPU Quadro NVS 440 (NV43GL) at PCI:99:0:0 (GPU-1)
(--) Feb 18 11:16:55 NVIDIA(GPU-1): Memory: 131072 kBytes
(--) Feb 18 11:16:55 NVIDIA(GPU-1): VideoBIOS: 05.43.02.88.03
(II) Feb 18 11:16:55 NVIDIA(GPU-1): Detected PCI Express Link width: 16X
(--) Feb 18 11:16:55 NVIDIA(GPU-1): Interlaced video modes are supported on this GPU
(--) Feb 18 11:16:55 NVIDIA(GPU-1): Connected display device(s) on Quadro NVS 440 at PCI:99:0:0:
(--) Feb 18 11:16:55 NVIDIA(GPU-1):    Samsung SyncMaster (DFP-0)
(--) Feb 18 11:16:55 NVIDIA(GPU-1): Samsung SyncMaster (DFP-0): 155.0 MHz maximum pixel clock
(--) Feb 18 11:16:55 NVIDIA(GPU-1): Samsung SyncMaster (DFP-0): Internal Single Link TMDS
(II) Feb 18 11:16:55 NVIDIA(0): Initialized GPU GART.
(II) Feb 18 11:16:55 NVIDIA(0): Setting mode "DFP-0:1600x1200_60+0+0"
(II) Loading extension NV-GLX
(II) Feb 18 11:16:55 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Feb 18 11:16:55 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Feb 18 11:16:55 NVIDIA(1): Initialized GPU GART.
(II) Feb 18 11:16:55 NVIDIA(1): Setting mode "DFP-1:1600x1200_60+0+0"
(II) Feb 18 11:16:56 NVIDIA(1): Initialized OpenGL Acceleration
(==) NVIDIA(1): Disabling shared memory pixmaps
(II) Feb 18 11:16:56 NVIDIA(1): Initialized X Rendering Acceleration
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(**) NVIDIA(1): DPMS enabled
(==) RandR enabled
(II) Found 2 VGA devices: arbiter wrapping enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device "Power Button" (/dev/input/event1)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 2.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event1"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) XKB: reuse xkmfile /var/lib/xkb/server-0C76CA335E924C2441A31FBFED02D59A89874CA6.xkm
(II) config/udev: Adding input device "Power Button" (/dev/input/event0)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event0"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (/dev/input/event4)
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": always reports core events
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Device: "/dev/input/event4"
(II) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Found 9 mouse buttons
(II) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Found scroll wheel(s)
(II) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Found relative axes
(II) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Found x and y relative axes
(II) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Configuring as mouse
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": YAxisMapping: buttons 4 and 5
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Microsoft Microsoft Wireless Optical Mouse® 1.00"" (type: MOUSE)
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": (accel) keeping acceleration scheme 1
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": (accel) acceleration profile 0
(II) "Microsoft Microsoft Wireless Optical Mouse® 1.00": initialized for relative axes.
(II) config/udev: Adding input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (/dev/input/mouse1)
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": always reports core events
(**) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Microsoft Microsoft Wireless Optical Mouse® 1.00""
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event3)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event3"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event2)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event2"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Feb 18 11:17:54 NVIDIA(0): Setting mode "DFP-0:1600x1200_60+0+0"
(II) Feb 18 11:17:54 NVIDIA(1): Setting mode "DFP-1:1600x1200_60+0+0"
(II) "Power Button": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Microsoft Microsoft Wireless Optical Mouse® 1.00": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.

shai@ShaiDesktop104:/var/log$ Xorg -version
Code:

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
Current Operating System: Linux ShaiDesktop104 2.6.32-10-generic #14-Ubuntu SMP Thu Jan 7 17:38:08 UTC 2010 x86_64
Kernel command line: auto BOOT_IMAGE=Linux ro root=/dev/sda1
Build Date: 19 January 2010  07:28:22AM
xorg-server 2:1.7.3.902-1ubuntu9 (buildd@)
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.



All times are GMT -5. The time now is 08:21 AM.