I have changed from ATI suckage to NVIDIA. I use now GF4 TI440. I booted to init 3.
Then i downloaded drivers from nvidia page (NVIDIA-Linux-x86-1.0-7667-pkg1.run). And they installed nicely, module was compiled also ok. I ran SAX2 -m 0=nvidia. this also went fine.
Then i edited my xorg.conf as it says in readme from nvidia. Everyting works ok as off 3D support.
It just says than 3d support is not enabled. In sax it says that it is enabled. I use SUSE 9.2 btw.
my lsmod:
vmnet 23068 14
vmmon 98828 3
nvram 8328 0
usbserial 26856 0
parport_pc 37824 1
lp 10536 0
parport 37960 2 parport_pc,lp
speedstep_lib 4228 0
freq_table 4356 0
thermal 17928 0
processor 25640 1 thermal
fan 5380 0
button 8464 0
battery 11396 0
ac 6404 0
ipt_MASQUERADE 3840 1
snd_pcm_oss 57896 0
snd_mixer_oss 19200 2 snd_pcm_oss
snd_via82xx 26276 2
snd_ac97_codec 69728 1 snd_via82xx
snd_pcm 96776 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd_page_alloc 10248 2 snd_via82xx,snd_pcm
gameport 4608 1 snd_via82xx
snd_mpu401_uart 7552 1 snd_via82xx
snd_rawmidi 24356 1 snd_mpu401_uart
snd_seq_device 8716 1 snd_rawmidi
snd 60164 11 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,s nd_seq_device
soundcore 9056 2 snd
pppoe 13888 2
pppox 3720 1 pppoe
ipt_TOS 2560 28
ipt_TCPMSS 4480 2
ip6t_LOG 6656 49
ip6t_limit 2432 49
ipt_LOG 6912 74
ipt_limit 2432 74
ipt_pkttype 1792 4
ppp_generic 28052 6 pppoe,pppox
slhc 7936 1 ppp_generic
af_packet 20872 4
ip6t_state 2048 27
ip6_conntrack 38404 1 ip6t_state
ipt_state 2176 45
ip6t_REJECT 7552 3
ipt_REJECT 6784 3
iptable_mangle 2944 1
iptable_filter 3072 1
ip6table_mangle 2688 0
ip_nat_ftp 5232 0
iptable_nat 23980 3 ipt_MASQUERADE,ip_nat_ftp
ip_conntrack_ftp 72752 1 ip_nat_ftp
ip_conntrack 43128 5 ipt_MASQUERADE,ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ftp
ip_tables 17664 11 ipt_MASQUERADE,ipt_TOS,ipt_TCPMSS,ipt_LOG,ipt_limit,ipt_pkttype,ipt_state,ipt_REJECT,iptable_mangle, iptable_filter,iptable_nat
ip6table_filter 2816 1
ip6_tables 18816 6 ip6t_LOG,ip6t_limit,ip6t_state,ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 237312 25 ip6_conntrack,ip6t_REJECT
subfs 7552 2
nls_utf8 2176 1
ntfs 91888 1
edd 10012 0
usbhid 40132 0
evdev 8960 0
joydev 9664 0
sg 35872 0
st 37404 0
sr_mod 16292 0
ide_cd 38176 1
cdrom 36508 2 sr_mod,ide_cd
ehci_hcd 29188 0
via_agp 8960 1
agpgart 32168 1 via_agp
uhci_hcd 29712 0
dmfe 19868 0
dm_mod 54524 0
usbcore 106724 6 usbserial,usbhid,ehci_hcd,uhci_hcd
sk98lin 173676 1
reiserfs 242000 3
sata_via 7428 1
libata 41860 1 sata_via
sd_mod 16912 2
scsi_mod 111052 5 sg,st,sr_mod,libata,sd_mod
my glxinfo:
name of display: :0.0
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
Error: couldn't find RGB GLX visual
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x21 16 tc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
0x22 16 dc 1 0 0 c . . 0 0 0 0 0 0 0 0 0 0 0 0 0 None
Segmentation fault
This is clearly wrong. But what have i done wrong by install ?? Maybe because i jst installed drivers no matter that i had ATI card before on the system ?
Please help me i was on sea side and came home bought some old nvidia card to finaly be able to play some ut2004 on linux, and performance of this GF4 TI4400 will be 500% better than ATI Radeon 9800pro ... on linux that is
And there is no loaded module called nvidia for some reason.
thx
