Hi
I have just got a Advent ADE-A1 webcam (1.3 mega pixel Laptop version) however it is not recognised by Ubuntu. Upon searching it looks like I am the only person in the world with this webcam let alone trying it with Linux.
Any ideas ?
Many thanks.

Post USB output from 'dmesg' or 'lsusb -v'?

lsusb -v (Could not capture all ):

bTransferCharacteristics 1 (BT.709)
bMatrixCoefficients 4 (SMPTE 170M (BT.601))
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0080 1x 128 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0100 1x 256 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0320 1x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0b20 2x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1320 3x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 6
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x13e8 3x 1000 bytes
bInterval 1
Interface Association:
bLength 8
bDescriptorType 11
bFirstInterface 2
bInterfaceCount 2
bFunctionClass 1 Audio
bFunctionSubClass 0
bFunctionProtocol 0
iFunction 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 4
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 39
bInCollection 1
baInterfaceNr( 0) 3
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 1
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 1
wChannelConfig 0x0000
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 2
bSourceID 1
bControlSize 2
bmaControls( 0) 0x03
bmaControls( 0) 0x00
Mute
Volume
iFeature 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 3
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 2
iTerminal 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 3
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 29
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 7 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 16000
tSamFreq[ 3] 22050
tSamFreq[ 4] 24000
tSamFreq[ 5] 44100
tSamFreq[ 6] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0190 1x 400 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 005 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
stuart@stuart-ubuntu:~$

dmesg:

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f5d3400 end: 000000001f6d3400 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001f6d3400 size: 000000000092cc00 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004007000 end: 00000000f4007000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f4008000 size: 0000000000004000 end: 00000000f400c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f6d3400 (usable)
[ 0.000000] BIOS-e820: 000000001f6d3400 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
[ 0.000000] BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 502MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 128723) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128723
[ 0.000000] HighMem 128723 -> 128723
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128723
[ 0.000000] On node 0 totalpages: 128723
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 973 pages used for memmap
[ 0.000000] Normal zone: 123654 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 DELL ) @ 0x000fc1d0
[ 0.000000] ACPI: RSDT (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x1f6d39cd
[ 0.000000] ACPI: FADT (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x1f6d4800
[ 0.000000] ACPI: HPET (v001 DELL M07 0x00000001 ASL 0x00000061) @ 0x1f6d4f00
[ 0.000000] ACPI: MADT (v001 DELL M07 0x27d60c12 ASL 0x00000047) @ 0x1f6d5000
[ 0.000000] ACPI: MCFG (v016 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x1f6d4fc0
[ 0.000000] ACPI: SLIC (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x1f6d509c
[ 0.000000] ACPI: BOOT (v001 DELL M07 0x27d60c12 ASL 0x00000061) @ 0x1f6d4bc0
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x1f6d3a0d
[ 0.000000] ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)
[ 0.000000] Detected 1595.996 MHz processor.
[ 5.502871] Built 1 zonelists. Total pages: 127718
[ 5.502877] Kernel command line: root=UUID=3d6b535e-8886-463c-af7e-67e5e9f34bcb ro quiet splash
[ 5.503045] mapped APIC to ffffd000 (fee00000)
[ 5.503047] mapped IOAPIC to ffffc000 (fec00000)
[ 5.503050] Enabling fast FPU save and restore... done.
[ 5.503053] Enabling unmasked SIMD FPU exception support... done.
[ 5.503061] Initializing CPU#0
[ 5.503132] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 5.504762] Console: colour VGA+ 80x25
[ 5.504940] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 5.505150] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 5.515623] Memory: 499384k/514892k available (1992k kernel code, 14916k reserved, 900k data, 328k init, 0k highmem)
[ 5.515634] virtual kernel memory layout:
[ 5.515635] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 5.515637] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 5.515638] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 5.515639] lowmem : 0xc0000000 - 0xdf6d3000 ( 502 MB)
[ 5.515641] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 5.515642] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 5.515643] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 5.515647] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 5.515808] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 5.515814] hpet0: 3 64-bit timers, 14318180 Hz
[ 5.516819] Using HPET for base-timer
[ 5.595737] Calibrating delay using timer specific routine.. 3195.51 BogoMIPS (lpj=6391035)
[ 5.595779] Security Framework v1.0.0 initialized
[ 5.595786] SELinux: Disabled at boot.
[ 5.595801] Mount-cache hash table entries: 512
[ 5.595935] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 5.595943] monitor/mwait feature present.
[ 5.595945] using mwait in idle threads.
[ 5.595950] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 5.595952] CPU: L2 cache: 2048K
[ 5.595955] CPU: Physical Processor ID: 0
[ 5.595957] CPU: Processor Core ID: 0
[ 5.595959] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 5.595969] Compat vDSO mapped to ffffe000.
[ 5.595972] Remapping vsyscall page to ffffe000
[ 5.595985] Checking 'hlt' instruction... OK.
[ 5.611830] SMP alternatives: switching to UP code
[ 5.612192] Early unpacking initramfs... done
[ 5.966209] ACPI: Core revision 20060707
[ 5.982627] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 5.985469] CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 5.985489] SMP alternatives: switching to SMP code
[ 5.985615] Booting processor 1/1 eip 3000
[ 7.795796] Initializing CPU#1
[ 7.873246] Calibrating delay using timer specific routine.. 3192.12 BogoMIPS (lpj=6384242)
[ 7.873254] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[ 7.873260] monitor/mwait feature present.
[ 7.873264] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 7.873266] CPU: L2 cache: 2048K
[ 7.873268] CPU: Physical Processor ID: 0
[ 7.873270] CPU: Processor Core ID: 1
[ 7.873272] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[ 6.075806] CPU1: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 6.075833] Total of 2 processors activated (6387.63 BogoMIPS).
[ 6.076036] ENABLING IO-APIC IRQs
[ 6.076243] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 6.223149] checking TSC synchronization across 2 CPUs:
[ 0.000002] CPU#0 had -900391 usecs TSC skew, fixed it up.
[ 0.000004] CPU#1 had 900391 usecs TSC skew, fixed it up.
[ 0.003997] Brought up 2 CPUs
[ 0.192693] migration_cost=69
[ 0.192995] Booting paravirtualized kernel on bare hardware
[ 0.193091] Time: 19:50:31 Date: 07/27/107
[ 0.193121] NET: Registered protocol family 16
[ 0.193214] EISA bus registered
[ 0.193219] ACPI: bus type pci registered
[ 0.222150] PCI: PCI BIOS revision 2.10 entry at 0xfb336, last bus=13
[ 0.222152] PCI: Using configuration type 1
[ 0.222154] Setting up standard PCI resources
[ 0.250360] ACPI: Interpreter enabled
[ 0.250363] ACPI: Using IOAPIC for interrupt routing
[ 0.251355] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.251365] PCI: Probing PCI hardware (bus 00)
[ 0.251576] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.266288] Boot video device is 0000:00:02.0
[ 0.266936] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.266941] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.268089] PCI: Transparent bridge - 0000:00:1e.0
[ 0.268153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.291373] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.291660] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[ 0.291953] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[ 0.292234] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[ 0.292520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.292804] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.293088] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.293373] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.295004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.295302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.295757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.296240] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.296249] pnp: PnP ACPI init
[ 0.332641] pnp: PnP ACPI: found 12 devices
[ 0.332645] PnPBIOS: Disabled by ACPI PNP
[ 0.332688] PCI: Using ACPI for IRQ routing
[ 0.332691] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.381480] NET: Registered protocol family 8
[ 0.381482] NET: Registered protocol family 20
[ 0.401898] pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.401902] pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
[ 0.401906] pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
[ 0.401911] pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
[ 0.401914] pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
[ 0.401918] pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
[ 0.401921] pnp: 00:03: ioport range 0x1060-0x107f has been reserved
[ 0.401924] pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
[ 0.401927] pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
[ 0.401935] pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
[ 0.401938] pnp: 00:08: ioport range 0x910-0x91f has been reserved
[ 0.401941] pnp: 00:08: ioport range 0x920-0x92f has been reserved
[ 0.401944] pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
[ 0.401946] pnp: 00:08: ioport range 0x930-0x97f has been reserved
[ 0.402274] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 0.402278] PCI: Bridge: 0000:00:1c.0
[ 0.402280] IO window: disabled.
[ 0.402287] MEM window: efd00000-efdfffff
[ 0.402292] PREFETCH window: disabled.
[ 0.402298] PCI: Bridge: 0000:00:1c.3
[ 0.402301] IO window: d000-dfff
[ 0.402308] MEM window: efa00000-efcfffff
[ 0.402313] PREFETCH window: e0000000-e01fffff
[ 0.402320] PCI: Bridge: 0000:00:1e.0
[ 0.402321] IO window: disabled.
[ 0.402328] MEM window: ef900000-ef9fffff
[ 0.402333] PREFETCH window: disabled.
[ 0.402364] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.402372] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.402398] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 0.402404] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.402419] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.402447] NET: Registered protocol family 2
[ 0.443631] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.443713] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.443812] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.443865] TCP: Hash tables configured (established 16384 bind 8192)
[ 0.443868] TCP reno registered
[ 0.459680] checking if image is initramfs... it is
[ 1.154457] Freeing initrd memory: 6750k freed
[ 1.154679] Simple Boot Flag at 0x79 set to 0x1
[ 1.155201] audit: initializing netlink socket (disabled)
[ 1.155219] audit(1188244231.948:1): initialized
[ 1.155410] VFS: Disk quotas dquot_6.5.1
[ 1.155433] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.155488] io scheduler noop registered
[ 1.155491] io scheduler anticipatory registered
[ 1.155494] io scheduler deadline registered
[ 1.155507] io scheduler cfq registered (default)
[ 1.155781] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.155843] assign_interrupt_mode Found MSI capability
[ 1.155846] Allocate Port Service[0000:00:1c.0cie00]
[ 1.155880] Allocate Port Service[0000:00:1c.0cie02]
[ 1.156015] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.156076] assign_interrupt_mode Found MSI capability
[ 1.156079] Allocate Port Service[0000:00:1c.3cie00]
[ 1.156112] Allocate Port Service[0000:00:1c.3cie02]
[ 1.156297] isapnp: Scanning for PnP cards...
[ 1.510054] isapnp: No Plug & Play device found
[ 1.534598] Real Time Clock Driver v1.12ac
[ 1.534674] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.535301] mice: PS/2 mouse device common for all mice
[ 1.535891] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.536129] input: Macintosh mouse button emulation as /class/input/input0
[ 1.536167] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.536171] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.536426] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.539403] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.539408] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.539573] EISA: Probing bus 0 at eisa.0
[ 1.539584] Cannot allocate resource for EISA slot 1
[ 1.539616] EISA: Detected 0 cards.
[ 1.569794] TCP cubic registered
[ 1.569806] NET: Registered protocol family 1
[ 1.569831] Starting balanced_irq
[ 1.569840] Using IPI No-Shortcut mode
[ 1.569965] ACPI: (supports S0 S3 S4 S5)
[ 1.570014] Magic number: 3:844:850
[ 1.570103] hash matches device ptyv2
[ 1.570351] Freeing unused kernel memory: 328k freed
[ 1.570524] Time: tsc clocksource has been installed.
[ 1.571216] input: AT Translated Set 2 keyboard as /class/input/input1
[ 2.788520] Capability LSM initialized
[ 2.826045] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 2.826245] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 2.826477] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.826482] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.826955] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 2.827137] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 2.827417] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.827422] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.440000] ACPI: Thermal Zone [THM] (32 C)
[ 3.444000] Time: hpet clocksource has been installed.
[ 3.804000] usbcore: registered new interface driver usbfs
[ 3.804000] usbcore: registered new interface driver hub
[ 3.804000] usbcore: registered new device driver usb
[ 3.808000] USB Universal Host Controller Interface driver v3.0
[ 3.808000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 3.808000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.808000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.808000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.808000] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000bf80
[ 3.808000] usb usb1: configuration #1 chosen from 1 choice
[ 3.808000] hub 1-0:1.0: USB hub found
[ 3.808000] hub 1-0:1.0: 2 ports detected
[ 3.852000] ieee1394: Initialized config rom entry `ip1394'
[ 3.912000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19
[ 3.912000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.912000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.912000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.912000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60
[ 3.912000] usb usb2: configuration #1 chosen from 1 choice
[ 3.912000] hub 2-0:1.0: USB hub found
[ 3.912000] hub 2-0:1.0: 2 ports detected
[ 4.016000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 20
[ 4.016000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4.016000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.016000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 4.016000] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000bf40
[ 4.016000] usb usb3: configuration #1 chosen from 1 choice
[ 4.016000] hub 3-0:1.0: USB hub found
[ 4.016000] hub 3-0:1.0: 2 ports detected
[ 4.120000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 21
[ 4.120000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 4.120000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.120000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 4.120000] uhci_hcd 0000:00:1d.3: irq 21, io base 0x0000bf20
[ 4.120000] usb usb4: configuration #1 chosen from 1 choice
[ 4.120000] hub 4-0:1.0: USB hub found
[ 4.120000] hub 4-0:1.0: 2 ports detected
[ 4.224000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
[ 4.224000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.224000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.224000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 4.224000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.224000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.224000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xffa80000
[ 4.228000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.228000] usb usb5: configuration #1 chosen from 1 choice

more as it was too long for the thread:

[ 4.228000] hub 5-0:1.0: USB hub found
[ 4.228000] hub 5-0:1.0: 8 ports detected
[ 4.256000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 4.336000] SCSI subsystem initialized
[ 4.344000] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 4.392000] libata version 2.20 loaded.
[ 4.396000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.400000] b44.c:v1.01 (Jun 16, 2006)
[ 4.400000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 22
[ 4.404000] eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:b0:75:e0
[ 4.404000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 4.404000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.404000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 22
[ 4.404000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.404000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
[ 4.404000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
[ 4.404000] scsi0 : ata_piix
[ 4.568000] ata1.00: ata_hpa_resize 1: sectors = 114270345, hpa_sectors = 117210240
[ 4.568000] ata1.00: Host Protected Area detected.
[ 4.568000] current size : 114270345 sectors (58506 MB)
[ 4.568000] native size : 117210240 sectors (60011 MB)
[ 4.568000] ata1.00: SET of native returned 0, expected 117210240
[ 4.568000] ata1.00: ATA-7: FUJITSU MHV2060BH, 0085002A, max UDMA/100
[ 4.568000] ata1.00: 114270345 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.576000] ata1.00: ata_hpa_resize 1: sectors = 114270345, hpa_sectors = 117210240
[ 4.576000] ata1.00: Host Protected Area detected.
[ 4.576000] current size : 114270345 sectors (58506 MB)
[ 4.576000] native size : 117210240 sectors (60011 MB)
[ 4.576000] ata1.00: SET of native returned 0, expected 117210240
[ 4.576000] ata1.00: configured for UDMA/100
[ 4.576000] scsi1 : ata_piix
[ 4.600000] usb 5-3: new high speed USB device using ehci_hcd and address 2
[ 4.740000] usb 5-3: configuration #1 chosen from 1 choice
[ 4.936000] ata2.00: ATAPI, max UDMA/33
[ 5.140000] ata2.00: configured for UDMA/33
[ 5.140000] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060B 0085 PQ: 0 ANSI: 5
[ 5.164000] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632D DE03 PQ: 0 ANSI: 5
[ 5.168000] SCSI device sda: 114270345 512-byte hdwr sectors (58506 MB)
[ 5.168000] sda: Write Protect is off
[ 5.168000] sda: Mode Sense: 00 3a 00 00
[ 5.168000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.168000] SCSI device sda: 114270345 512-byte hdwr sectors (58506 MB)
[ 5.168000] sda: Write Protect is off
[ 5.168000] sda: Mode Sense: 00 3a 00 00
[ 5.168000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.168000] sda: sda1 sda2 < sda5 >
[ 5.224000] sd 0:0:0:0: Attached scsi disk sda
[ 5.228000] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 5.228000] Uniform CD-ROM driver Revision: 3.20
[ 5.228000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.232000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.232000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.392000] Attempting manual resume
[ 5.392000] swsusp: Resume From Partition 8:5
[ 5.392000] PM: Checking swsusp image.
[ 5.392000] PM: Resume from disk failed.
[ 5.436000] kjournald starting. Commit interval 5 seconds
[ 5.436000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.672000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[324fc0000f313850]
[ 22.044000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 22.048000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.124000] iTCO_vendor_support: vendor-support=0
[ 22.124000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 22.124000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 22.124000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 22.156000] intel_rng: FWH not detected
[ 22.352000] Linux agpgart interface v0.102 (c) Dave Jones
[ 22.396000] agpgart: Detected an Intel 945GM Chipset.
[ 22.396000] agpgart: Detected 7932K stolen memory.
[ 22.412000] agpgart: AGP aperture is 256M @ 0xd0000000
[ 22.596000] input: PC Speaker as /class/input/input2
[ 22.632000] NET: Registered protocol family 17
[ 22.648000] ieee80211_crypt: registered algorithm 'NULL'
[ 22.648000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 22.648000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 22.688000] Linux video capture interface: v2.00
[ 22.696000] sdhci: Secure Digital Host Controller Interface driver
[ 22.696000] sdhci: Copyright(c) Pierre Ossman
[ 22.696000] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
[ 22.696000] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 23
[ 22.696000] mmc0: SDHCI at 0xef9fd400 irq 23 DMA
[ 22.756000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp
[ 22.756000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 22.756000] ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.756000] PCI: Setting latency timer of device 0000:0b:00.0 to 64
[ 22.756000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 22.848000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 22.848000] usbcore: registered new interface driver uvcvideo
[ 22.848000] USB Video Class driver (v0.1.0)
[ 22.896000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x180b1, caps: 0xa04713/0x200000
[ 22.936000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 23.024000] 2:3:1: cannot get freq at ep 0x84
[ 23.036000] usbcore: registered new interface driver snd-usb-audio
[ 23.116000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 23.116000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 23.624000] lp: driver loaded but no devices found
[ 23.700000] Adding 1485972k swap on /dev/disk/by-uuid/9ddf9ccb-2e38-4cf0-89f7-8ae397efe602. Priority:-1 extents:1 across:1485972k
[ 23.784000] EXT3 FS on sda1, internal journal
[ 24.648000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 24.948000] ieee80211_crypt: registered algorithm 'WEP'

Weird thing is that while 'lsusb' doesn't recognise it, it appears it's recognised if you look at your syslog/dmesg:
[ 22.848000] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[ 22.848000] usbcore: registered new interface driver uvcvideo
[ 22.848000] USB Video Class driver (v0.1.0)


Vendor ID 0c45 means it's Microdia or equiv, maybe a Sonix sn9c-something chipset. (However the Product ID tag not listed at www.qbik.ch.) Is this a HP Pavillion by any chance? Anyway. I don't know if it's Video for Linux (V4L) or Video for Linux 2 (V4L2) capable, maybe try Luvcviewer and Camorama. If that doesn't work read http://ubuntuforums.org/showthread.php?t=512059 down at " Sonix/Microdia Webcam".

If you do (or if you don't) get this cam to work, please add an entry in the http://www.linuxquestions.org/hcl/.

I could not get this to work so I have replaced the camera with a Logitech Quickcam Pro 5000 as I know someone who has this working on Ubuntu.

Hi!!!

I followed the next instructions and finally... I get it!!!

I recommend you this site: https://help.ubuntu.com/community/Webcam

I execute this steps:

2. Testing Your Webcam Using Cheese
3. Webcam Software
3.1. Configuring Webcam Software
3.2. VLC
3.2.1. Using the GUI
3.2.2. Using the Command Line

And now my webcam runs!!!!! I'm very happy!!!

Well... I hope that you can fixed your problem too...
Have a nice day...

Enjoy!!!
Monica