LinuxQuestions.org - [SOLVED] No Wi-Fi in Pavilion dv5 with Debian

- Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)

- - No Wi-Fi in Pavilion dv5 with Debian (https://www.linuxquestions.org/questions/linux-hardware-18/no-wi-fi-in-pavilion-dv5-with-debian-773136/)

No Wi-Fi in Pavilion dv5 with Debian

Hello to all;

I have made a clean Lenny installation in a HP Pavilion dv5 1112es, everything has been ok until I'vre reached the wi-fi configuration.

This is my uname -a

Code:

Linux dharma 2.6.26-2-686 #1 SMP Wed Nov 4 20:45:37 UTC 2009 i686 GNU/Linux

this is my card according to lspci:

Code:

02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

and the chip model, following linuxwireless.org

Code:

# lspci -vnn | grep 14e4

02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)

So I've got BCM4312 802.11b/g - low power which uses b43 driver. I install b43-fwcutter with aptitude, agree to install the firmware and everything seems to go ok, but after reboot there is no sign of wl.

Code:

# iwconfig

lo        no wireless extensions

eth0      no wireless extensions

I was told to modprobe driver b43

Code:

# modprobe b43

# lsmod | grep b43

b43 110716 0

ssb 33476 1 b43

rfkill 5652 1 b43

pcmcia 29548 2 b43,ssb

firmware_class 6816 2 b43,pcmcia

rng_core 3940 1 b43

mac80211 139776 1 b43

led_class 3908 1 b43

input_polldev 3752 1 b43

pcmcia_core 31892 3 b43,ssb,pcmcia

In dmesg

Code:

[ 232.440371] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]

but still no trace of wifi. After some more google and searching I was given this web site: http://aptgetinstallanarchism.wordpr...2bg-en-debian/

I updated my linux headers, downloaded the file from http://www.broadcom.com/support/802.11/linux_sta.php, make a temp directoy in my home, uncompress the file and got this error

Code:

# make -C /usr/src/linux-headers-$(uname -r) M=$(pw                                                                          d)

make: se ingresa al directorio `/usr/src/linux-headers-2.6.26-2-686'

  LD      /home/paquito/broadcom/built-in.o

  CC [M]  /home/paquito/broadcom/src/wl/sys/wl_linux.o

  CC [M]  /home/paquito/broadcom/src/wl/sys/wl_iw.o

  CC [M]  /home/paquito/broadcom/src/shared/linux_osl.o

  LD [M]  /home/paquito/broadcom/wl.o

  Building modules, stage 2.

  MODPOST 1 modules

WARNING: modpost: missing MODULE_LICENSE() in /home/paquito/broadcom/wl.o

see include/linux/module.h for more information

  CC      /home/paquito/broadcom/wl.mod.o

  LD [M]  /home/paquito/broadcom/wl.ko

make: se sale del directorio `/usr/src/linux-headers-2.6.26-2-686'

And I have stalled here, don't know what might be wrong. I suppose the problem now is in the compilation process, but I'm not sure. Can anybody give me a hand please?

Thanks a lot

Broadcom BCM4312-based wireless LAN devices are supported by the <b43> driver, except the low-power PCIe (PCI-ID 14e4:4315, aka "BCM4310 USB") in kernels < 2.6.32.

Broadcom's non-free "hybrid" driver, supporting wireless LAN devices based on the BCM4311, BCM4312, BCM4321 or BCM4322 chipset; for x86 and x86-64 only. Supports the BCM4312 low-power variant (PCI-ID 14e4:4315, aka "BCM4310 USB"). To install, see http://wiki.debian.org/wl

Quote:

Originally Posted by craigevil (Post 3779955)

Wow!! Thank you very much, I've followed your post and I am getting this,

Code:

# iwconfig

lo        no wireless extensions.



eth0      no wireless extensions.



eth2      IEEE 802.11bg  ESSID:"OpenWrt"  Nickname:""

          Mode:Managed  Frequency:2.447 GHz  Access Point: 00:18:84:10:35:D1

          Bit Rate=54 Mb/s  Tx-Power:32 dBm

          Retry min limit:7  RTS thr:off  Fragment thr:off

          Power Managementmode:All packets received

          Link Quality=5/5  Signal level=-36 dBm  Noise level=-77 dBm

          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0

          Tx excessive retries:0  Invalid misc:0  Missed beacon:0

Thanks again!