No Sound on Knoppix

human_algorithm · 05-04-2006, 06:57 AM

I am running Knoppix 3.2 from a Live CD.
Unfortunately, I cant get the onboard sound card, lan card to work on my Intel GAVL motherboard.
Please help!!
Here's some information that might help.
Please note that I was trying to install various drivers available on the Live CD while I entered these commands, so U might find some information abt some drivers that I tried below.

knoppix@ttyp0[knoppix]$ /sbin/lspci -v
00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04)
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, fast devsel, latency 0
Capabilities: <available only to root>

00:01.0 PCI bridge: Intel Corp.: Unknown device 2581 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: ffa00000-ffafffff
Prefetchable memory behind bridge: cff00000-cfffffff
Capabilities: <available only to root>

00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2582 (rev 04) (prog-if 00 [VGA])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at ff480000 (32-bit, non-prefetchable) [size=512K]
I/O ports at ec00 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at ff440000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <available only to root>

00:1b.0 Class 0403: Intel Corp.: Unknown device 2668 (rev 03)
Subsystem: Intel Corp.: Unknown device e203
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at ff43c000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <available only to root>

00:1c.0 PCI bridge: Intel Corp.: Unknown device 2660 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: ff600000-ff6fffff
Prefetchable memory behind bridge: 00000000cfb00000-00000000cfb00000
Capabilities: <available only to root>

00:1c.1 PCI bridge: Intel Corp.: Unknown device 2662 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: ff700000-ff7fffff
Prefetchable memory behind bridge: 00000000cfc00000-00000000cfc00000
Capabilities: <available only to root>

00:1c.2 PCI bridge: Intel Corp.: Unknown device 2664 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: ff800000-ff8fffff
Prefetchable memory behind bridge: 00000000cfd00000-00000000cfd00000
Capabilities: <available only to root>

00:1c.3 PCI bridge: Intel Corp.: Unknown device 2666 (rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: ff900000-ff9fffff
Prefetchable memory behind bridge: 00000000cfe00000-00000000cfe00000
Capabilities: <available only to root>

00:1d.0 USB Controller: Intel Corp.: Unknown device 2658 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at c800 [size=32]

00:1d.1 USB Controller: Intel Corp.: Unknown device 2659 (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at cc00 [size=32]

00:1d.2 USB Controller: Intel Corp.: Unknown device 265a (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at d000 [size=32]

00:1d.3 USB Controller: Intel Corp.: Unknown device 265b (rev 03) (prog-if 00 [UHCI])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d400 [size=32]

00:1d.7 USB Controller: Intel Corp.: Unknown device 265c (rev 03) (prog-if 20 [EHCI])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at ff43bc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <available only to root>

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff500000-ff5fffff
Prefetchable memory behind bridge: 00000000cfa00000-00000000cfa00000
Capabilities: <available only to root>

00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03)
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned> [size=8]
I/O ports at <unassigned> [size=4]
I/O ports at <unassigned> [size=8]
I/O ports at <unassigned> [size=4]
I/O ports at ffa0 [size=16]

00:1f.2 IDE interface: Intel Corp.: Unknown device 2651 (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Intel Corp.: Unknown device 4156
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19
I/O ports at e800 [size=8]
I/O ports at e400 [size=4]
I/O ports at e000 [size=8]
I/O ports at dc00 [size=4]
I/O ports at d800 [size=16]
Capabilities: <available only to root>

00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03)
Subsystem: Intel Corp.: Unknown device 4156
Flags: medium devsel, IRQ 19
I/O ports at c400 [size=32]

06:08.0 Ethernet controller: Intel Corp.: Unknown device 1064 (rev 01)
Subsystem: Intel Corp.: Unknown device 3057
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at ff500000 (32-bit, non-prefetchable) [size=4K]
I/O ports at bc00 [size=64]
Capabilities: <available only to root>

-------------------------------------------------------------------
knoppix@ttyp0[knoppix]$ dmesg
esent_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-17, 1-21, 1-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 25.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 00170020
....... : max redirection entries: 0017
....... : PRQ implemented: 0
....... : IO APIC version: 0020
.... register #02: 00170020
....... : arbitration: 00
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 A9
11 000 00 1 0 0 0 0 0 0 00
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 001 01 1 1 0 1 0 1 1 C1
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2666.7428 MHz.
..... host bus clock speed is 133.3371 MHz.
cpu: 0, clocks: 1333371, slice: 666685
CPU0<T0:1333360,T1:666672,D:3,S:666685,C:1333371>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router default [8086/2640] at 00:1f.0
PCI->APIC IRQ transform: (B0,I2,P0) -> 16
PCI->APIC IRQ transform: (B0,I27,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P0) -> 23
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P3) -> 16
PCI->APIC IRQ transform: (B0,I29,P0) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 19
PCI->APIC IRQ transform: (B6,I8,P0) -> 20
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0xd0000000, mapped to 0xf880d000, size 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at a5f3:1f5f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=266f
PCI: Device 00:1f.1 not available because of resource collisions
PCI_IDE: BIOS setup was incomplete.
PCI_IDE: chipset revision 3
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda

MA, hdb

MA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc

io, hdd

io
PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=2651
PCI_IDE: chipset revision 3
PCI_IDE: 100% native mode on irq 19
ide2: BM-DMA at 0xd800-0xd807, BIOS settings: hde

io, hdf

io
ide3: BM-DMA at 0xd808-0xd80f, BIOS settings: hdg

io, hdh

io
hda: SAMSUNG SP0802N, ATA DISK drive
hdb: SAMSUNG CD-R/RW DRIVE SW-252F, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=9733/255/63
ide-cd: passing drive hdb to ide-scsi emulation.
Partition check:
hda: hda1 hda2 < hda5 hda6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SAMSUNG Model: CD-R/RW SW-252F Rev: R804
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 468k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
NCR53c406a: no available ports found
aec671x_detect:
scsi: <fdomain> Detection failed (no card)
megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
ISO 9660 Extensions: Microsoft Joliet Level 3
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2
ISO 9660 Extensions: RRIP_1991A
cloop: Welcome to cloop v0.68
cloop: /cdrom/KNOPPIX/KNOPPIX: 28738 blocks, 65536 bytes/block, largest block is
65562 bytes.
cloop: loaded (max 1 devices)
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 128k freed
Real Time Clock Driver v1.10e
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
unloading Kernel Card Services
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 23
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 18
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.3 to 64
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 16
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
hub.c: new USB device 00:1d.1-1, assigned address 2
usb.c: USB device 2 (vend/prod 0xf62/0x1001) is not claimed by any active driver
.
hub.c: new USB device 00:1d.3-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:1d.3-2.4, assigned address 3
usb.c: USB device 3 (vend/prod 0x10d6/0x1100) is not claimed by any active drive
r.
usb.c: registered new driver usb_mouse
input0: Acrox USB & PS/2 Mouse on usb2:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
usb-uhci.c: ENXIO 84000280, flags 0, urb f5c57c30, burb f5c57cb0
usb-uhci.c: ENXIO 84000280, flags 0, urb f5c57c30, burb f5c57cb0
mice: PS/2 mouse device common for all mice
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-uhci.c: interrupt, status 2, frame# 595
usb_control/bulk_msg: timeout
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 245473 512-byte hdwr sectors (126 MB)
sda: Write Protect is off
sda: sda1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI IS
APNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
i810_rng: RNG not detected
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
OPL3 not detected ff
Journalled Block Device driver loaded
end_request: I/O error, dev 02:00 (floppy), sector 0
Intel 810 + AC97 Audio, version 0.21, 15:49:30 Mar 26 2003
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2

satinet · 05-05-2006, 09:23 AM

i suspect it may be that the kernel version and version of alsa on this older release don't support your hardware. I have had this before and found it just worked on a later version of knoppix....

human_algorithm · 05-06-2006, 02:50 AM

Ok, I guess I'll just download the latest version of Knoppix (4.0.2 I think) and try it.
Also, if all my hardware gets detected on this new Knoppix, is it safe to say that it will get detected on other distros( say Ubuntu 5.10) as they might be running the same kernel versions?

satinet · 05-06-2006, 03:12 PM

yes, i would be surprised if it doesn't work.........

human_algorithm · 05-08-2006, 02:25 AM

Hey, I downloaded Knoppix 4.0. Congfigured DHCP broadcast and internet started working thru my adsl router connected to my onboard LAN card through ethernet connection. However sound still doesnt work

It still says

Couldnt open audio
Please check that Your sound card is configured properly
You have the correct output plugin selected
No other program is blocking the sound card

I have a Intel 915GAVL motherboard with a onboard sound card, and the kernel version is 2.6.12 as expected.