LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 12-19-2007, 05:51 PM   #1
strokefatty
LQ Newbie
 
Registered: Nov 2007
Posts: 3

Rep: Reputation: 0
New Network Card


Ubuntu Server 7.10 worked great until i switch network cards. I cannot get my existing installation to recognize the new card. If I boot off a live CD (ubuntu, xubuntu, puppy, etc..) I have no problem connecting to the network. I cannot figure out how to get the existing installation to recognize the changed hardware. I searched for a solution for 5 hours last night and another hour today so now I am posting, hoping someone can tell me what i am doing wrong.

uname -r
2.6.22-14-server

/sbin/lspci (no such file)

i cannot figure out how to output dmesg to a file to post but what i can "see" on my screen when i do that command is
[41.559228] NET: Registered protocal family 10
[41.559372] lo: Disabled Privacy Extensions
 
Old 12-19-2007, 06:39 PM   #2
m.kabirahmed
LQ Newbie
 
Registered: Dec 2007
Posts: 2

Rep: Reputation: 0
Smile hi

Hi This is kabir here what i like to let u know is

1.)please check the card which u have connected on mother board and check that particular connection is working or not.
2.)uninstall and try reinstall the software which is require for that particular thing,
3.)change the ip address and try pinging through command promt

If have solved ur problem and if u have better knowledge then me, please let me know to my mailing id that is (m_kabirahmed@yahoo.co.in)


----------------X-X-X-X----------------X-X-X-X----------------X-X-X-X----------------

Quote:
Originally Posted by strokefatty View Post
Ubuntu Server 7.10 worked great until i switch network cards. I cannot get my existing installation to recognize the new card. If I boot off a live CD (ubuntu, xubuntu, puppy, etc..) I have no problem connecting to the network. I cannot figure out how to get the existing installation to recognize the changed hardware. I searched for a solution for 5 hours last night and another hour today so now I am posting, hoping someone can tell me what i am doing wrong.

uname -r
2.6.22-14-server

/sbin/lspci (no such file)

i cannot figure out how to output dmesg to a file to post but what i can "see" on my screen when i do that command is
[41.559228] NET: Registered protocal family 10
[41.559372] lo: Disabled Privacy Extensions
 
Old 12-19-2007, 06:40 PM   #3
Uncle_Theodore
Member
 
Registered: Dec 2007
Location: Charleston WV, USA
Distribution: Slackware 12.2, Arch Linux Amd64
Posts: 896

Rep: Reputation: 70
Which card is it?
You can redirect dmesg output into a file by doing
dmesg > dmesg.log
or look at /var/log/messages

You might also wanna check which module is loaded by the distros that actually recognize your card.
 
Old 12-19-2007, 06:42 PM   #4
m.kabirahmed
LQ Newbie
 
Registered: Dec 2007
Posts: 2

Rep: Reputation: 0
Smile Hi

Dear Sir/Madam;


This is kabir who has been never worked on linux so i would like to have good knowledge about linux so if u can help me out then mail me to my yahoo id that (m_kabirahmed@yahoo.co.in)

Thanks & Regards
Md Kabir Ahmed
 
Old 12-19-2007, 06:53 PM   #5
neophytezer0
LQ Newbie
 
Registered: Nov 2007
Location: localhost
Distribution: Slackware
Posts: 21

Rep: Reputation: 15
network card

Most likely what is going on is that Ubuntu is still trying to use the old configuration for the new card. First off: Was the old card as bus card, or was it onboard?

Right now, on my computer i am on has an onboard NIC, which i used to use until it was damaged by one thing or another. So i installed a new NIC on the bus and switched over to it.

However, when i start my computer, it still tries to load the onboard NIC, and doesnt bother with the new NIC. So, I have to initialize it myself. Here is what I do (as root, or for you, use sudo):
Code:
ifconfig eth1 up
dhcpcd eth1
and that takes care of mine. I will repost when I figure out how to make the change permanent :S

Last edited by neophytezer0; 12-19-2007 at 09:13 PM.
 
Old 12-19-2007, 09:05 PM   #6
strokefatty
LQ Newbie
 
Registered: Nov 2007
Posts: 3

Original Poster
Rep: Reputation: 0
Thumbs down no dhcpcd & nic not working

First I followed these steps...
ifconfig eth1 up
dhcpcd eth1

on the second..."program 'dhcpcd' is currently not intsalled..."
so i try to install and get error "could not resolve 'us.archive.ubuntu.com' because this nic isn't working

I am not sure how to post the log inside one of those nice little boxes so i just have to paste the whole thing....


[ 0.000000] Linux version 2.6.22-14-server (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:34:23 GMT 2007 (Ubuntu 2.6.22-14.46-server)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff87000 (usable)
[ 0.000000] BIOS-e820: 000000001ff87000 - 000000001ffa6000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffa6000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 130951) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 130951
[ 0.000000] HighMem 130951 -> 130951
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 130951
[ 0.000000] On node 0 totalpages: 130951
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125864 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FD730 checksum 0
[ 0.000000] ACPI: RSDP 000FD730, 0014 (r0 DELL )
[ 0.000000] ACPI: RSDT 000FD744, 0030 (r1 DELL DIM 8100 5 ASL 61)
[ 0.000000] ACPI: FACP 000FD774, 0074 (r1 DELL DIM 8100 5 ASL 61)
[ 0.000000] ACPI: DSDT FFFE5022, 2136 (r1 DELL dt_ex 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFA6000, 0040
[ 0.000000] ACPI: SSDT FFFE7295, 00BA (r1 DELL st_ex 1000 MSFT 100000D)
[ 0.000000] ACPI: BOOT 000FD7E8, 0028 (r1 DELL 8100 5 ASL 61)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfb00000)
[ 0.000000] Built 1 zonelists. Total pages: 129928
[ 0.000000] Kernel command line: root=UUID=2dc05c89-6dfb-4afc-aa5b-d081848e1aca ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0140d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 1694.907 MHz processor.
[ 20.779122] Console: colour VGA+ 80x25
[ 20.779471] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.779863] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.799514] Memory: 507880k/523804k available (2047k kernel code, 15328k reserved, 920k data, 364k init, 0k highmem)
[ 20.799529] virtual kernel memory layout:
[ 20.799530] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 20.799532] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 20.799534] vmalloc : 0xe0800000 - 0xffbfe000 ( 499 MB)
[ 20.799536] lowmem : 0xc0000000 - 0xdff87000 ( 511 MB)
[ 20.799537] .init : 0xc03eb000 - 0xc0446000 ( 364 kB)
[ 20.799539] .data : 0xc02ffcc6 - 0xc03e5f04 ( 920 kB)
[ 20.799541] .text : 0xc0100000 - 0xc02ffcc6 (2047 kB)
[ 20.799546] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.799601] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 20.949585] Calibrating delay using timer specific routine.. 3392.66 BogoMIPS (lpj=16963331)
[ 20.949622] Security Framework v1.0.0 initialized
[ 20.949633] SELinux: Disabled at boot.
[ 20.949654] Mount-cache hash table entries: 512
[ 20.949865] CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 20.949885] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 20.949890] CPU: L2 cache: 256K
[ 20.949894] CPU: Hyper-Threading is disabled
[ 20.949898] CPU: After all inits, caps: 3febf9ff 00000000 00000000 0000b080 00000000 00000000 00000000
[ 20.949915] Compat vDSO mapped to ffffe000.
[ 20.949935] Checking 'hlt' instruction... OK.
[ 20.989799] SMP alternatives: switching to UP code
[ 20.990143] Freeing SMP alternatives: 11k freed
[ 20.990730] Early unpacking initramfs... done
[ 21.473082] ACPI: Core revision 20070126
[ 21.484539] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 21.507386] ACPI: setting ELCR to 0200 (from 0e08)
[ 21.507814] CPU0: Intel(R) Pentium(R) 4 CPU 1700MHz stepping 0a
[ 21.507824] SMP motherboard not detected.
[ 21.507827] Local APIC not detected. Using dummy APIC emulation.
[ 21.507886] Brought up 1 CPUs
[ 21.508084] Booting paravirtualized kernel on bare hardware
[ 21.508172] Time: 1:51:39 Date: 11/20/107
[ 21.508208] NET: Registered protocol family 16
[ 21.508368] EISA bus registered
[ 21.508389] ACPI: bus type pci registered
[ 21.534136] PCI: PCI BIOS revision 2.10 entry at 0xfc10e, last bus=2
[ 21.534141] PCI: Using configuration type 1
[ 21.534144] Setting up standard PCI resources
[ 21.547155] ACPI: EC: Look up EC in DSDT
[ 21.565727] ACPI: Interpreter enabled
[ 21.565734] ACPI: (supports S0 S1 S3 S4 S5)
[ 21.565766] ACPI: Using PIC for interrupt routing
[ 21.585042] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.585070] PCI: Probing PCI hardware (bus 00)
[ 21.585360] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 21.585367] PCI quirk: region 0880-08bf claimed by ICH4 GPIO
[ 21.586092] PCI: Transparent bridge - 0000:00:1e.0
[ 21.586133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.586608] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 21.602058] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 21.602423] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 21.602785] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 21.603147] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 21.603502] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 21.603861] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 21.604217] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 21.604580] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 21.604799] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.604824] pnp: PnP ACPI init
[ 21.604842] ACPI: bus type pnp registered
[ 21.624476] pnp: PnP ACPI: found 10 devices
[ 21.624482] ACPI: ACPI bus type pnp unregistered
[ 21.624490] PnPBIOS: Disabled by ACPI PNP
[ 21.624588] PCI: Using ACPI for IRQ routing
[ 21.624594] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.631228] NET: Registered protocol family 8
[ 21.631231] NET: Registered protocol family 20
[ 21.631249] NetLabel: Initializing
[ 21.631252] NetLabel: domain hash size = 128
[ 21.631254] NetLabel: protocols = UNLABELED CIPSOv4
[ 21.631278] NetLabel: unlabeled traffic allowed by default
[ 21.631401] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 21.631408] pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 21.631413] pnp: 00:00: iomem range 0x1000000-0x1ff86fff could not be reserved
[ 21.631417] pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 21.631438] pnp: 00:09: ioport range 0x800-0x85f has been reserved
[ 21.631443] pnp: 00:09: ioport range 0xc00-0xc7f has been reserved
[ 21.631448] pnp: 00:09: ioport range 0x860-0x8ff could not be reserved
[ 21.639387] Time: tsc clocksource has been installed.
[ 21.662016] PCI: Bridge: 0000:00:01.0
[ 21.662019] IO window: disabled.
[ 21.662026] MEM window: fd000000-feffffff
[ 21.662031] PREFETCH window: f0000000-f7ffffff
[ 21.662038] PCI: Bridge: 0000:00:1e.0
[ 21.662043] IO window: e000-efff
[ 21.662051] MEM window: ff100000-ff2fffff
[ 21.662057] PREFETCH window: 30000000-300fffff
[ 21.662079] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 21.662101] NET: Registered protocol family 2
[ 21.759413] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 21.759485] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 21.759636] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 21.759784] TCP: Hash tables configured (established 16384 bind 16384)
[ 21.759789] TCP reno registered
[ 21.789576] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 22.251751] it is
[ 22.743269] Freeing initrd memory: 6910k freed
[ 22.743423] Simple Boot Flag at 0x7d set to 0x1
[ 22.743733] audit: initializing netlink socket (disabled)
[ 22.743752] audit(1198115499.850:1): initialized
[ 22.747281] VFS: Disk quotas dquot_6.5.1
[ 22.747378] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.747552] io scheduler noop registered
[ 22.747557] io scheduler anticipatory registered
[ 22.747560] io scheduler deadline registered (default)
[ 22.747595] io scheduler cfq registered
[ 22.747652] Boot video device is 0000:01:00.0
[ 22.747931] isapnp: Scanning for PnP cards...
[ 23.104990] isapnp: No Plug & Play device found
[ 23.194932] Real Time Clock Driver v1.12ac
[ 23.195069] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.195181] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.197109] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.198508] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.198872] input: Macintosh mouse button emulation as /class/input/input0
[ 23.199165] PNP: No PS/2 controller found. Probing ports directly.
[ 23.449195] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.449481] mice: PS/2 mouse device common for all mice
[ 23.449682] EISA: Probing bus 0 at eisa.0
[ 23.449734] EISA: Detected 0 cards.
[ 23.449886] TCP cubic registered
[ 23.449907] NET: Registered protocol family 1
[ 23.449945] Using IPI No-Shortcut mode
[ 23.450198] Magic number: 3:980:862
[ 23.450375] hash matches device ptyw0
[ 23.450954] Freeing unused kernel memory: 364k freed
[ 23.736616] AppArmor: AppArmor initialized<5>audit(1198115500.850:2): type=1505 info="AppArmor initialized" pid=1038
[ 23.751298] fuse init (API version 7.8)
[ 23.759990] Failure registering capabilities with primary security module.
[ 24.939190] SCSI subsystem initialized
[ 24.949774] libata version 2.21 loaded.
[ 24.952639] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 24.952647] PCI: setting IRQ 11 as level-triggered
[ 24.952653] ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 24.952666] 3c59x: Donald Becker and others.
[ 24.952673] 0000:02:0c.0: 3Com PCI 3c905C Tornado at e0838c00.
[ 24.985527] usbcore: registered new interface driver usbfs
[ 24.985568] usbcore: registered new interface driver hub
[ 24.985620] usbcore: registered new device driver usb
[ 24.985678] ata_piix 0000:00:1f.1: version 2.11
[ 24.985750] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 24.987488] scsi0 : ata_piix
[ 24.987583] scsi1 : ata_piix
[ 24.987624] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[ 24.987631] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[ 24.987767] USB Universal Host Controller Interface driver v3.0
[ 25.119240] Floppy drive(s): fd0 is 1.44M
[ 25.158846] ata1.00: ATA-7: SAMSUNG SP0612N, TT100-23, max UDMA/133
[ 25.158853] ata1.00: 117304992 sectors, multi 8: LBA48
[ 25.178384] FDC 0 is a National Semiconductor PC87306
[ 25.178850] ata1.00: configured for UDMA/100
[ 25.678541] ata2.00: ATAPI: SAMSUNG DVD-ROM SD-616, F006DEL, max UDMA/33
[ 25.678552] ata2.01: ATAPI: LG CD-RW CED-8080B, 1.06, max MWDMA2
[ 25.878484] ata2.00: configured for UDMA/33
[ 26.078497] ata2.01: configured for MWDMA2
[ 26.078677] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0612N TT10 PQ: 0 ANSI: 5
[ 26.079846] scsi 1:0:0:0: CD-ROM SAMSUNG DVD-ROM SD-616 F006 PQ: 0 ANSI: 5
[ 26.080677] scsi 1:0:1:0: CD-ROM LG CD-RW CED-8080B 1.06 PQ: 0 ANSI: 5
[ 26.085368] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 26.085376] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 26.085395] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 26.085401] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 26.085715] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 26.085752] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80
[ 26.085958] usb usb1: configuration #1 chosen from 1 choice
[ 26.086009] hub 1-0:1.0: USB hub found
[ 26.086023] hub 1-0:1.0: 2 ports detected
[ 26.188835] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[ 26.188842] PCI: setting IRQ 9 as level-triggered
[ 26.188847] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
[ 26.188865] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 26.188871] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 26.188918] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 26.188949] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ff60
[ 26.189122] usb usb2: configuration #1 chosen from 1 choice
[ 26.189168] hub 2-0:1.0: USB hub found
[ 26.189184] hub 2-0:1.0: 2 ports detected
[ 26.312330] sd 0:0:0:0: [sda] 117304992 512-byte hardware sectors (60060 MB)
[ 26.312355] sd 0:0:0:0: [sda] Write Protect is off
[ 26.312360] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.312389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.312471] sd 0:0:0:0: [sda] 117304992 512-byte hardware sectors (60060 MB)
[ 26.312488] sd 0:0:0:0: [sda] Write Protect is off
[ 26.312493] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.312520] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.312525] sda: sda1 sda2 < sda5 >
[ 26.345186] sd 0:0:0:0: [sda] Attached SCSI disk
[ 26.370039] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.370072] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 26.370101] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 26.388590] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 26.388599] Uniform CD-ROM driver Revision: 3.20
[ 26.388688] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 26.435237] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 26.435338] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 26.468104] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 26.619683] usb 1-2: configuration #1 chosen from 1 choice
[ 26.622641] hub 1-2:1.0: USB hub found
[ 26.625571] hub 1-2:1.0: 4 ports detected
[ 26.746894] Attempting manual resume
[ 26.746901] swsusp: Resume From Partition 8:5
[ 26.746904] PM: Checking swsusp image.
[ 26.747159] PM: Resume from disk failed.
[ 26.807373] kjournald starting. Commit interval 5 seconds
[ 26.807394] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.979398] usb 1-2.1: new low speed USB device using uhci_hcd and address 3
[ 27.137451] usb 1-2.1: configuration #1 chosen from 1 choice
[ 27.389205] usb 1-2.3: new low speed USB device using uhci_hcd and address 4
[ 27.548251] usb 1-2.3: configuration #1 chosen from 1 choice
[ 27.789026] usb 1-2.4: new low speed USB device using uhci_hcd and address 5
[ 27.949061] usb 1-2.4: configuration #1 chosen from 1 choice
[ 32.496063] Linux agpgart interface v0.102 (c) Dave Jones
[ 32.572019] agpgart: Detected an Intel i850 Chipset.
[ 32.575925] agpgart: AGP aperture is 64M @ 0xf8000000
[ 32.593495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.603895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.027660] intel_rng: FWH not detected
[ 33.762450] iTCO_vendor_support: vendor-support=0
[ 33.764185] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 33.764289] iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860)
[ 33.764334] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.858144] input: PC Speaker as /class/input/input1
[ 34.257371] parport_pc 00:08: reported by Plug and Play ACPI
[ 34.257487] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[ 34.339342] usbcore: registered new interface driver hiddev
[ 34.376018] input: Belkin Corporation Flip CC as /class/input/input2
[ 34.376127] input,hiddev96: USB HID v1.10 Device [Belkin Corporation Flip CC] on usb-0000:00:1f.2-2.1
[ 34.389273] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
[ 34.389336] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1f.2-2.3
[ 34.405698] input: Logitech USB Receiver as /class/input/input4
[ 34.405749] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1f.2-2.4
[ 34.513356] input: Logitech USB Receiver as /class/input/input5
[ 34.513436] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1f.2-2.4
[ 34.513461] usbcore: registered new interface driver usbhid
[ 34.513467] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 34.680474] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 34.680481] PCI: setting IRQ 10 as level-triggered
[ 34.680487] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 35.351342] loop: module loaded
[ 35.388961] lp0: using parport0 (interrupt-driven).
[ 35.710256] Adding 2265124k swap on /dev/sda5. Priority:-1 extents:1 across:2265124k
[ 36.125615] EXT3 FS on sda1, internal journal
[ 41.712279] NET: Registered protocol family 10
[ 41.712409] lo: Disabled Privacy Extensions
 
Old 12-19-2007, 10:51 PM   #7
strokefatty
LQ Newbie
 
Registered: Nov 2007
Posts: 3

Original Poster
Rep: Reputation: 0
after spending 6-8 hours searching for answer I finally gave up and did a complete reinstall and now everything is working. thank you for attempting to help me solve this without that step
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Slackware 10 network configuration. Problem with 8139 network card drivers ! Padmakiran Linux - Networking 8 03-27-2007 06:48 AM
Linux and Network card compatbility, will any network card work ? MrMark Linux - Networking 6 02-12-2007 08:17 PM
linux shuts down built in network card then windows tells me network card is unplugge lesmoxhaybaker SUSE / openSUSE 8 08-29-2006 05:10 PM
3c905C network card in docking station. Cannot activate network device eth0. pathelms Linux - Networking 4 04-12-2006 02:55 PM
network card issue (the card itself no network problem) Youri Linux - Hardware 2 01-23-2006 08:58 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 10:40 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration