LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   need help with creative vista webcam, 041e:401a (https://www.linuxquestions.org/questions/linux-hardware-18/need-help-with-creative-vista-webcam-041e-401a-596200/)

girard 10-31-2007 09:51 PM
need help with creative vista webcam, 041e:401a
 
i've been trying to get this webcam working on ubuntu gutsy, but i couldn't for the past two days. i was able to make it work under fiesty, but for some reason, it doesn't with my new installation. to make matters worse, the other webcam i had, which was basically plug and play with fiesty, also no longer works. i tried installing all that came up with "webcam" in synaptic, but to no avail. i also have gspcav1-20070508, tried spca5xx... but nothing there.

camorama says it cannot connect to /dev/video0, which actually only shows up with ls /dev, when the other webcam (vimicro) is plugged in... not with the creative one.

i hope this would be all the info you might need, but i would post more in case i missed out... i just followed what they ask for in the posts i've read. i'm new here so i don't know which commands to enter into the terminal though.

i hope you guys can help... this has been my only problem with gutsy, but i'm seriously considering reverting to fiesty. what do you guys think?

thanks.

here is lsusb:
Quote:
lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 012: ID 041e:401a Creative Technology, Ltd
Bus 001 Device 001: ID 0000:0000
here is dmesg:
Quote:
usbcore 138632 4 gspca,zc0301,ohci_hcd
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor

girard@Gutsy:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dffc000 (usable)
[ 0.000000] BIOS-e820: 000000000dffc000 - 000000000dfff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 223MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 57340) 0 entries of 256 used
[ 20.623327] ACPI: Invalid PBLK length [5]
[ 21.446222] usbcore: registered new interface driver usbfs
[ 21.446266] usbcore: registered new interface driver hub
[ 21.446300] usbcore: registered new device driver usb
[ 21.447475] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 21.447542] ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 20 (level, low) -> IRQ 16
[ 21.447563] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 21.447856] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 21.447887] ohci_hcd 0000:00:02.2: irq 16, io mem 0xe7000000
[ 21.499981] SCSI subsystem initialized
[ 21.506629] libata version 2.21 loaded.
[ 21.522724] sis900.c: v1.08.10 Apr. 2 2006
[ 21.537472] usb usb1: configuration #1 chosen from 1 choice
[ 21.537526] hub 1-0:1.0: USB hub found
[ 21.537595] hub 1-0:1.0: 3 ports detected
[ 21.641644] ACPI: PCI Interrupt 0000:00:02.3[A] -> GSI 23 (level, low) -> IRQ 17
[ 21.641672] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 21.641710] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 21.641739] ohci_hcd 0000:00:02.3: irq 17, io mem 0xe6800000
[ 21.691985] Floppy drive(s): fd0 is 1.44M
[ 21.699543] usb usb2: configuration #1 chosen from 1 choice
[ 21.699599] hub 2-0:1.0: USB hub found
[ 21.699623] hub 2-0:1.0: 3 ports detected
[ 21.742418] FDC 0 is a post-1991 82077
[ 21.806323] pata_sis 0000:00:02.5: version 0.5.1
[ 21.806629] scsi0 : pata_sis
[ 21.806702] scsi1 : pata_sis
[ 21.806831] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001b800 irq 14
[ 21.806836] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001b808 irq 15
[ 21.944962] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 22.148458] usb 1-1: configuration #1 chosen from 1 choice
[ 22.292834] ata1.00: ATA-6: ST340015A, 3.01, max UDMA/100
[ 22.292842] ata1.00: 78165360 sectors, multi 16: LBA
[ 22.292851] ata1.01: ATAPI: LTN526, YH0X, max UDMA/33
[ 22.308766] ata1.00: configured for UDMA/100
[ 22.472588] ata1.01: configured for UDMA/33
[ 22.792000] ata2.00: ATAPI: LITE-ON LTR-48246S, SS0C, max UDMA/33
[ 22.963748] ata2.00: configured for UDMA/33
[ 22.963953] scsi 0:0:0:0: Direct-Access ATA ST340015A 3.01 PQ: 0 ANSI: 5
[ 22.964863] scsi 0:0:1:0: CD-ROM LITEON CD-ROM LTN526 YH0X PQ: 0 ANSI: 5
[ 22.970026] scsi 1:0:0:0: CD-ROM LITE-ON LTR-48246S SS0C PQ: 0 ANSI: 5
[ 22.970622] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 22.971795] 0000:00:03.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 22.983290] 0000:00:03.0: Using transceiver found at address 1 as default
[ 22.984358] eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 18, 00:e0:18:d9:4b:68.
[ 23.014204] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 23.014259] sd 0:0:0:0: [sda] Write Protect is off
[ 23.014263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.014284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.014391] sd 0:0:0:0: [sda] 78165360 512-byte hardware sectors (40021 MB)
[ 23.014403] sd 0:0:0:0: [sda] Write Protect is off
[ 23.014406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.014421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.014427] sda: sda1 sda2 < sda5 > sda3
[ 23.068903] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.074833] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.074863] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 23.074889] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[ 23.093375] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 23.093387] Uniform CD-ROM driver Revision: 3.20
[ 23.093849] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 23.168216] sr1: scsi3-mmc drive: 251x/48x writer cd/rw xa/form2 cdda tray
[ 23.168336] sr 1:0:0:0: Attached scsi CD-ROM sr1
[ 23.481732] Attempting manual resume
[ 23.481739] swsusp: Resume From Partition 8:5
[ 23.481741] PM: Checking swsusp image.
[ 23.482030] PM: Resume from disk failed.
[ 23.523482] kjournald starting. Commit interval 5 seconds
[ 23.523504] EXT3-fs: mounted filesystem with ordered data mode.
[ 30.000241] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 30.080327] Netfilter messages via NETLINK v0.30.
[ 30.089229] nf_conntrack version 0.5.0 (1791 buckets, 14328 max)
[ 33.097194] Linux agpgart interface v0.102 (c) Dave Jones
[ 33.118851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.130212] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 33.151735] agpgart: Detected SiS chipset - id:1856
[ 33.157345] agpgart: AGP aperture is 64M @ 0xe8000000
[ 33.411817] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[ 33.768996] input: PC Speaker as /class/input/input2
[ 34.475899] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 34.480158] parport_pc 00:0a: reported by Plug and Play ACPI
[ 34.480223] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 34.838625] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 21 (level, low) -> IRQ 19
[ 35.161881] intel8x0_measure_ac97_clock: measured 55860 usecs
[ 35.161888] intel8x0: clocking to 48000
[ 35.859964] lp0: using parport0 (interrupt-driven).
[ 35.919654] Adding 650592k swap on /dev/sda5. Priority:-1 extents:1 across:650592k
[ 36.402571] EXT3 FS on sda1, internal journal
[ 36.990800] kjournald starting. Commit interval 5 seconds
[ 36.990960] EXT3 FS on sda3, internal journal
[ 36.990968] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.235592] No dock devices found.
[ 38.447323] input: Power Button (FF) as /class/input/input4
[ 38.454373] ACPI: Power Button (FF) [PWRF]
[ 38.504279] input: Power Button (CM) as /class/input/input5
[ 38.511253] ACPI: Power Button (CM) [PWRB]
[ 40.253440] ppdev: user-space parallel port driver
[ 40.557952] audit(1193804823.771:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4728 profile="/usr/sbin/cupsd"
[ 40.676321] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 40.676330] apm: overridden by ACPI.
[ 42.220205] Failure registering capabilities with primary security module.
[ 42.396550] eth0: Media Link On 10mbps full-duplex
[ 42.612732] Bluetooth: Core ver 2.11
[ 42.613205] NET: Registered protocol family 31
[ 42.613209] Bluetooth: HCI device and connection manager initialized
[ 42.613215] Bluetooth: HCI socket layer initialized
[ 42.638375] Bluetooth: L2CAP ver 2.8
[ 42.638384] Bluetooth: L2CAP socket layer initialized
[ 42.780016] Bluetooth: RFCOMM socket layer initialized
[ 42.780439] Bluetooth: RFCOMM TTY layer initialized
[ 42.780443] Bluetooth: RFCOMM ver 1.8
[ 47.207486] NET: Registered protocol family 17
[ 51.755448] NET: Registered protocol family 10
[ 51.755722] lo: Disabled Privacy Extensions
[ 62.470466] eth0: no IPv6 routers present
[ 334.012758] usb 1-1: USB disconnect, address 2
[ 340.105768] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 340.318560] usb 1-2: configuration #1 chosen from 1 choice
[ 340.985937] Linux video capture interface: v2.00
[ 341.366637] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.07
[ 341.370283] usb 1-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
[ 341.487530] usb 1-2: PB-0330 image sensor detected
[ 342.187415] usb 1-2: Initialization succeeded
[ 342.191331] usb 1-2: V4L2 device registered as /dev/video0
[ 342.191490] usbcore: registered new interface driver zc0301
[ 342.287511] usbcore: registered new interface driver gspca
[ 342.287637] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[16162.501235] usb 1-2: USB disconnect, address 3
[16162.502972] usb 1-2: Disconnecting ZC0301[P] PC Camera...
[16162.502981] usb 1-2: V4L2 device /dev/video0 deregistered
[16172.279324] usb 1-2: new full speed USB device using ohci_hcd and address 4
[16172.483161] usb 1-2: configuration #1 chosen from 1 choice
[16357.870284] usb 1-2: USB disconnect, address 4
[16365.592314] usb 1-2: new full speed USB device using ohci_hcd and address 5
[16365.805115] usb 1-2: configuration #1 chosen from 1 choice
[16365.808109] usb 1-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
[16365.927759] usb 1-2: PB-0330 image sensor detected
[16366.627636] usb 1-2: Initialization succeeded
[16366.627705] usb 1-2: V4L2 device registered as /dev/video0
[16379.662726] usb 1-2: USB disconnect, address 5
[16379.662918] usb 1-2: Disconnecting ZC0301[P] PC Camera...
[16379.662922] usb 1-2: V4L2 device /dev/video0 deregistered
[16404.639959] usb 1-1: new full speed USB device using ohci_hcd and address 6
[16404.852759] usb 1-1: configuration #1 chosen from 1 choice
[16404.855758] usb 1-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
[16404.975427] usb 1-1: PB-0330 image sensor detected
[16405.675282] usb 1-1: Initialization succeeded
[16405.675352] usb 1-1: V4L2 device registered as /dev/video0
[16793.241186] usb 1-1: USB disconnect, address 6
[16793.241607] usb 1-1: Disconnecting ZC0301[P] PC Camera...
[16793.241611] usb 1-1: V4L2 device /dev/video0 deregistered
[16801.383375] usb 1-1: new full speed USB device using ohci_hcd and address 7
[16801.587190] usb 1-1: configuration #1 chosen from 1 choice
[17069.116949] usb 1-2: new full speed USB device using ohci_hcd and address 8
[17069.328922] usb 1-2: configuration #1 chosen from 1 choice
[17069.331887] usb 1-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
[17069.451560] usb 1-2: PB-0330 image sensor detected
[17070.152433] usb 1-2: Initialization succeeded
[17070.152509] usb 1-2: V4L2 device registered as /dev/video0
[20919.618387] usb 1-2: USB disconnect, address 8
[20919.618570] usb 1-2: Disconnecting ZC0301[P] PC Camera...
[20919.618574] usb 1-2: V4L2 device /dev/video0 deregistered
[23141.702570] eth0: Corrupted packet received, buffer status = 0x90880493/1171.
[23840.693516] eth0: Corrupted packet received, buffer status = 0x90880122/290.
[27905.849253] eth0: Corrupted packet received, buffer status = 0x908801ca/458.
[28744.627609] eth0: Corrupted packet received, buffer status = 0x908800f2/242.
[31262.997279] eth0: Corrupted packet received, buffer status = 0x9088043b/1083.
[31826.184592] eth0: Corrupted packet received, buffer status = 0x908801bd/445.
[44374.411801] eth0: Media Link Off
[44399.378099] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[44404.369314] eth0: Media Link On 100mbps full-duplex
[44409.520753] eth0: no IPv6 routers present
[46462.398266] eth0: Media Link Off
[46522.314092] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[46527.305291] eth0: Media Link On 10mbps full-duplex
[46540.820666] eth0: no IPv6 routers present
[54470.560895] eth0: Corrupted packet received, buffer status = 0x9088033b/827.
[69242.293644] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=62955 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69245.277502] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=63003 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69251.270632] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=63208 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69263.261372] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=63595 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69287.242265] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=63988 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69319.213993] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=44 TOS=0x00 PREC=0x00 TTL=44 ID=64347 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69383.150928] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=67 TOS=0x00 PREC=0x00 TTL=44 ID=64912 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69447.073383] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=67 TOS=0x00 PREC=0x00 TTL=44 ID=110 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[69511.006451] Inbound IN=eth0 OUT= MAC=00:e0:18:d9:4b:68:00:50:b7:f0:7e:de:08:00 SRC=24.201.11.22 DST=192.168.252.249 LEN=71 TOS=0x00 PREC=0x00 TTL=44 ID=436 PROTO=TCP SPT=11967 DPT=44823 WINDOW=65535 RES=0x00 ACK PSH URGP=0
[78099.100888] usb 1-2: new full speed USB device using ohci_hcd and address 9
[78099.313738] usb 1-2: configuration #1 chosen from 1 choice
[78099.316678] usb 1-2: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
[78099.436355] usb 1-2: PB-0330 image sensor detected
[78100.136196] usb 1-2: Initialization succeeded
[78100.136274] usb 1-2: V4L2 device registered as /dev/video0
[78927.463817] usb 1-2: USB disconnect, address 9
[78927.465736] usb 1-2: Disconnecting ZC0301[P] PC Camera...
[78927.465749] usb 1-2: V4L2 device /dev/video0 deregistered
[78928.644965] usb 1-1: USB disconnect, address 7
[78948.467004] usb 1-1: new full speed USB device using ohci_hcd and address 10
[78948.670861] usb 1-1: configuration #1 chosen from 1 choice
[78972.257045] usb 1-1: USB disconnect, address 10
[78983.348672] usb 1-1: new full speed USB device using ohci_hcd and address 11
[78983.561462] usb 1-1: configuration #1 chosen from 1 choice
[78983.564439] usb 1-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
[78983.684101] usb 1-1: PB-0330 image sensor detected
[78984.383977] usb 1-1: Initialization succeeded
[78984.384052] usb 1-1: V4L2 device registered as /dev/video0
[79231.014920] usb 1-1: USB disconnect, address 11
[79231.015111] usb 1-1: Disconnecting ZC0301[P] PC Camera...
[79231.015115] usb 1-1: V4L2 device /dev/video0 deregistered
[79242.834151] usb 1-1: new full speed USB device using ohci_hcd and address 12
[79243.038038] usb 1-1: configuration #1 chosen from 1 choice
finally, here is lsmod:
Quote:
Module Size Used by
gspca 608336 0
zc0301 49156 0
compat_ioctl32 2304 1 zc0301
videodev 29312 2 gspca,zc0301
v4l1_compat 15364 1 videodev
v4l2_common 18432 2 zc0301,videodev
ipv6 273892 8
xt_limit 3584 8
xt_tcpudp 4224 19
ipt_LOG 7552 8
ipt_MASQUERADE 4608 0
ipt_TOS 3200 0
ipt_REJECT 5760 1
nf_conntrack_irc 8088 0
nf_conntrack_ftp 11136 0
xt_state 3456 6
af_packet 24840 2
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
ppdev 10244 0
cpufreq_ondemand 9612 0
cpufreq_userspace 5280 0
cpufreq_conservative 8072 0
cpufreq_powersave 2688 0
cpufreq_stats 7232 0
freq_table 5792 2 cpufreq_ondemand,cpufreq_stats
button 8976 0
ac 6148 0
video 18060 0
sbs 19592 0
container 5504 0
dock 10656 0
battery 11012 0
lp 12580 0
snd_intel8x0 34972 1
snd_ac97_codec 100644 1 snd_intel8x0
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
analog 13344 0
gameport 16776 1 analog
parport_pc 37412 1
snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 2 snd_pcm,snd_seq
snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 54660 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device
parport 37448 3 ppdev,lp,parport_pc
serio_raw 8068 0
pcspkr 4224 0
psmouse 39952 0
i2c_sis96x 6404 0
soundcore 8800 1 snd
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
sis_agp 10116 1
shpchp 34580 0
pci_hotplug 32704 1 shpchp
agpgart 35016 1 sis_agp
i2c_core 26112 1 i2c_sis96x
evdev 11136 3
iptable_nat 8708 0
nf_nat 20140 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 19724 8 iptable_nat
nf_conntrack 65288 7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink 6936 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_mangle 3840 0
iptable_filter 3968 1
ip_tables 13924 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 16260 9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_tables
ext3 133896 2
jbd 60456 1 ext3
mbcache 9732 1 ext3
sg 36764 0
sr_mod 17828 0
cdrom 37536 1 sr_mod
sd_mod 30336 4
pata_sis 15236 3
floppy 60004 0
sis900 24960 0
mii 6528 1 sis900
ata_generic 8452 0
libata 125168 2 pata_sis,ata_generic
scsi_mod 147084 4 sg,sr_mod,sd_mod,libata
ohci_hcd 22916 0
usbcore 138632 4 gspca,zc0301,ohci_hcd
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor


All times are GMT -5. The time now is 07:04 PM.