same as above but for 2nd hard disk test(after smart on)
[`smartctl -a /dev/hdb`]
root@1[knoppix]# smartctl -a /dev/hdb
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: IBM Deskstar 60GXP series
Device Model: IC35L060AVER07-0
Serial Number: SZPTZ1C6563
Firmware Version: ER6OA46A
User Capacity: 61,492,838,400 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Wed Nov 22 20:53:27 2006 EST
==> WARNING: IBM Deskstar 60GXP drives may need upgraded SMART firmware.
Please see
http://www.geocities.com/dtla_update/index.html#rel and
http://www-3.ibm.com/pc/support/site...cid=MIGR-42215 or
http://www-1.ibm.com/support/docview...psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2042) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 34) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 068 068 060 Pre-fail Always - 67834436
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 116 116 024 Pre-fail Always - 279 (Average 281)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 374
5 Reallocated_Sector_Ct 0x0033 001 001 005 Pre-fail Always FAILING_NOW 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 10958
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 371
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 374
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 374
194 Temperature_Celsius 0x0002 137 137 000 Old_age Always - 40 (Lifetime Min/Max 4/56)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 001 001 000 Old_age Always - 1899
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 17042 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17042 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 4e 00 60 f0 Error: UNC 1 sectors at LBA = 0x0060004e = 6291534
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 4e 00 60 f0 00 00:02:43.600 READ DMA
c8 00 02 4d 00 60 f0 00 00:02:38.700 READ DMA
c8 00 03 4c 00 60 f0 00 00:02:33.900 READ DMA
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
Error 17041 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 4d 00 60 f0 Error: UNC 2 sectors at LBA = 0x0060004d = 6291533
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 4d 00 60 f0 00 00:02:38.700 READ DMA
c8 00 03 4c 00 60 f0 00 00:02:33.900 READ DMA
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
Error 17040 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 4c 00 60 f0 Error: UNC 3 sectors at LBA = 0x0060004c = 6291532
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 03 4c 00 60 f0 00 00:02:33.900 READ DMA
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
c8 00 07 48 00 60 f0 00 00:02:14.500 READ DMA
Error 17039 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 4b 00 60 f0 Error: UNC 4 sectors at LBA = 0x0060004b = 6291531
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
c8 00 07 48 00 60 f0 00 00:02:14.500 READ DMA
c8 00 08 47 00 60 f0 00 00:02:09.600 READ DMA
Error 17038 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 4a 00 60 f0 Error: UNC 5 sectors at LBA = 0x0060004a = 6291530
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
c8 00 07 48 00 60 f0 00 00:02:14.500 READ DMA
c8 00 08 47 00 60 f0 00 00:02:09.600 READ DMA
c8 00 01 4e 00 60 f0 00 00:02:04.800 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
========================================================
[`smartctl -il error /dev/hdb`]
root@1[knoppix]# smartctl -il error /dev/hdb
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: IBM Deskstar 60GXP series
Device Model: IC35L060AVER07-0
Serial Number: SZPTZ1C6563
Firmware Version: ER6OA46A
User Capacity: 61,492,838,400 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Wed Nov 22 20:55:32 2006 EST
==> WARNING: IBM Deskstar 60GXP drives may need upgraded SMART firmware.
Please see
http://www.geocities.com/dtla_update/index.html#rel and
http://www-3.ibm.com/pc/support/site...cid=MIGR-42215 or
http://www-1.ibm.com/support/docview...psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 17042 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 17042 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 4e 00 60 f0 Error: UNC 1 sectors at LBA = 0x0060004e = 6291534
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 4e 00 60 f0 00 00:02:43.600 READ DMA
c8 00 02 4d 00 60 f0 00 00:02:38.700 READ DMA
c8 00 03 4c 00 60 f0 00 00:02:33.900 READ DMA
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
Error 17041 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 02 4d 00 60 f0 Error: UNC 2 sectors at LBA = 0x0060004d = 6291533
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 02 4d 00 60 f0 00 00:02:38.700 READ DMA
c8 00 03 4c 00 60 f0 00 00:02:33.900 READ DMA
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
Error 17040 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 03 4c 00 60 f0 Error: UNC 3 sectors at LBA = 0x0060004c = 6291532
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 03 4c 00 60 f0 00 00:02:33.900 READ DMA
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
c8 00 07 48 00 60 f0 00 00:02:14.500 READ DMA
Error 17039 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 4b 00 60 f0 Error: UNC 4 sectors at LBA = 0x0060004b = 6291531
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 04 4b 00 60 f0 00 00:02:29.000 READ DMA
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
c8 00 07 48 00 60 f0 00 00:02:14.500 READ DMA
c8 00 08 47 00 60 f0 00 00:02:09.600 READ DMA
Error 17038 occurred at disk power-on lifetime: 10958 hours (456 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 05 4a 00 60 f0 Error: UNC 5 sectors at LBA = 0x0060004a = 6291530
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 05 4a 00 60 f0 00 00:02:24.100 READ DMA
c8 00 06 49 00 60 f0 00 00:02:19.300 READ DMA
c8 00 07 48 00 60 f0 00 00:02:14.500 READ DMA
c8 00 08 47 00 60 f0 00 00:02:09.600 READ DMA
c8 00 01 4e 00 60 f0 00 00:02:04.800 READ DMA
