mikomi web camera and Mandriva Free 2010?
 

Hello,

I'd like to install Mikomi web camera but when I issue command
'lsusb' and have it connected to computer (USB) it doesn't show any entry
which would correspond to camera. Can I install this webcam in Linux?.

Cheers.

Plug in the camera, and type dmesg in a terminal. That will tell you if it is detected.

Good Day,

When I type dmesg this is what's showing up:


usb 2-8: new full speed USB device using ohci_hcd and address 5
usb 2-8: New USB device found, idVendor=0c45, idProduct=60fe
usb 2-8: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-8: Product: USB camera
usb 2-8: configuration #1 chosen from 1 choice
usb 2-8: SN9C105 PC Camera Controller detected (vid:pid 0x0C45:0x60FE)
usb 2-8: OV7630 image sensor detected
usb 2-8: Initialization succeeded
usb 2-8: V4L2 device registered as /dev/video0
usb 2-8: Optional device control through 'sysfs' interface disabled
usb 2-8: usb_submit_urb() failed, error -28
ohci_hcd 0000:00:02.0: leak ed f64a7280 (#81) state 2
usb 2-8: usb_submit_urb() failed, error -28

And I checked there is /dev/video0 when I connect the camera. But Skype and Kopete don't detect any device. What's wrong?.

Happy New Year,

Cheers.

try it with (cheese) or (wxcam)
gstreamer-properties in the terminal
click video try v4l or v4l2

I tried wxcam, cheese, and gstreamer-properties and everywhere error is the same: There's no space on the device. What else can I do?.

Cheers.

this is a guess but open cheese click edit set the size to its smallest

i do ? this usb 2-8: Optional device control through 'sysfs' interface disabled

did you click test wile in gstreamer-properties
looks like you need to test v4l2