Logitech quickcam messenger in mdk10.1
How do I get my logitech quickcam messenger (usb) working in Mandrake 10.1 official? I have the 2.6.8 kernel. THe hardwrae detecter in mcc detects it, but doesn't know what it is and puts it under "other", and calls it camera.
|
whats its id? 046d:xxxx
|
Here's everything I could find about it in the mcc.
Identification Vendor: Unknown Description: Camera Media class: Connection Bus: USB Bus PCI #: 3 PCI device #: 3 Vendor ID: 1133 Device ID: 2288 Misc Module: unknown Hope thats what your looking for. |
vendor 1133. hmmm. most logitechs are 046d's. try /sbin/lsusb or usbview if you have it installed
|
I installed usbview, but what do I want to do with it?
|
for my logiteck clicksmart 310 i had to install these drives called spca somthing somthing =/ i forgot
|
run it and see if the device id matches what you posted earlier.
|
The vendor id is 046d
Also, on the side of usbview, camera is in red text, that probably means something. |
that makes more sense, the device id is ? just under the vendor id in usbview
|
Actually, there is no device id, but there is a product one just under the vendor id, and it is 08f0.
Just so you know, I don't have drivers or anything for this, this was a thought I had today so that I can make linux as usable as possible. |
http://home.mag.cx/messenger/
you'll need to install your kernel source and headers, devel tools etc., the readme is fairly straight forward |
All times are GMT -5. The time now is 09:55 PM. |