Kubuntu 8.04 and dmraid
I've gotten as far as getting dmraid up and running. Here is the array information:
dpich@dpich-LINK:/dev$ sudo fdisk -l "/dev/mapper/nvidia_fjcbehbb" WARNING: GPT (GUID Partition Table) detected on '/dev/mapper/nvidia_fjcbehbb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/mapper/nvidia_fjcbehbb: 1500.3 GB, 1500312633344 bytes 255 heads, 63 sectors/track, 182402 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/mapper/nvidia_fjcbehbb1 1 182402 1465144064+ 86 NTFS volume set dpich@dpich-LINK:/dev$ Anytime I try and mount the array, I get the following: dpich@dpich-LINK:/dev$ sudo mount -t ntfs-3g "/dev/sdc1" /media/Storage NTFS signature is missing. Failed to mount '/dev/sdc1': Invalid argument The device '/dev/sdc1' doesn't have a valid NTFS. Maybe you selected the wrong device? Or the whole disk instead of a partition (e.g. /dev/hda, not /dev/hda1)? Or the other way around? dpich@dpich-LINK:$ dpich@dpich-LINK:$ sudo dmraid -s ERROR: ddf1: both header signatures bad on /dev/sdd ERROR: isw device for volume "Volume0" broken on /dev/sdd in RAID set "isw_cfjajiheid_Volume0" ERROR: isw: wrong # of devices in RAID set "isw_cfjajiheid_Volume0" [1/4] on /dev/sdd *** Group superset isw_cfjajiheid --> Subset name : isw_cfjajiheid_Volume0 size : 0 stride : 128 type : raid5_la status : broken subsets: 0 devs : 1 spares : 0 *** Active Set name : nvidia_fjcbehbb size : 2930298112 stride : 128 type : stripe status : ok subsets: 0 devs : 2 spares : 0 dpich@dpich-LINK:~$ I've been reading all kinds of forums, and I cannot find any good answer for this. Any suggestions? |
I seem to have caught this thread in the middle. You seem to have a RAID array made with the GPT label; are we looking at a dual boot situation? What's going on?
|
All times are GMT -5. The time now is 07:49 PM. |