LinuxQuestions.org - Kernel Panic: Booting into RAID 1

Debian 3.1 on Pentium 4 Linux Kernel-2.6.11.9
Booted with Knoppix, created partitions etc...
PCI ATA RAID 133 by I/O with a Silicon Image chipset
I followed the instructions for configuring my RAID 1 device on Juerd's website.
http://juerd.nl/site.plp/debianraid
When I do

Code:

#watch cat /proc/mdstat

I don't see the discs synching. And each partition is labeled:

Code:

[UU]

Which I assume means unused.
When I run LiLo I get:

Code:

Warning: COMPACT may conflict with LBA32 on some systems

Warning: '/proc/partitions' does not match '/dev' directory structure.

Name change: '/dev/cloop0' -> '/tmp/dev.0'

Warning: '/dev' directory struicture is incomplete; device (240, 0) is missing.

Linux *

My lilo.conf looks like:

Code:

boot=/dev/md0

root=/dev/md2

compact

lba32

read-only

image=/boot/vmlinuz-2.6.11.9

label=Linux

When I try and boot the system I get

Code:

md: ...autorun DONE.

ReiserFS: md2: warning: sh-2006: read_super_block: bread failed (dev md2, block 2, size 4096)

ReiserFS: md2: warning: sh-2006: read_super_block: bread failed (dev md2, block 16, size 4096)

EXT3-fs: unable to read superblock

EXT2-fs: unable to read superblock

FAT: unable to read boot sector

VFS: Cannot open root device "902" or unknown-block(9,2)

Please append a correct "root=" boot option

Kernel panic - not syncing: VFS: Unable to mount root fs on unkown-block(9,2)

I keep restarting my installation by booting into Knoppix, fdisk to delete the partitions, zeroing the superblock. Then I reboot Knoppix and follow the instructions on Juerd's site. Any suggestions on how to remount the file system so I dont have to keep reinstalling? Also, any suggestions on what I might need to do to solve the problem?