Is NVIDIA Geforce 7050 Linux Compatible ?
I purchased a new computer and I am trying to boot up gparted to partition the HD for installing my Linux Distros, but it gives the famous error
Quote:
I also tried three different monitors that have run Linux just fine on other computers. My only thought that I could come up with is the NVIDIA Geforce 7050 graphics is not compatible with Linux. Can anyone confirm this ? Or is there something else I can try ? |
That seems very unlikely.
Have you tried simply passing different video parameters at boot time? Most live CDs should show you the available video modes that you can force at boot. Try starting with the lowest settings (640 x 480) and working your way up. |
Quote:
|
|
Thanks for the link mark_alfred, but I am not sure if I am capable of following the instructions. I have never had to do this before. Does one have to go through this complicated procedure for all NVIDIA's or just certain chipsets ???
EDIT: how do you do this if you don't have Linux installed ??? And I can't install Linux because I can not get booted up because of the graphics.... |
Quote:
After that, you can install the nVidia drivers. But a side note to that...you don't necessarily have to. You'll get a full GUI, but use a different driver for it. You won't be taking full advantage of the card, so your 3d performance may be lacking...but things will work. But don't stress over it...it's really simple, you just have to run a command, and sit back and watch it run. |
ok, lets sort of start over here......
I have never installed any distro using the text mode, which is alien to me, it is never easy if one has never done it before. If I did figure out how to install in the text mode, then what ? Won't you have the same graphic problem when you boot up because it won't let you start in x ? I have confused some user's here on what distro I am trying to install, well I hadn't gotten that far yet. I Started out using the Gparted live cd so I can set my partitions up. I usually multi-boot anywhere from 4 to 8 different Linux distros. The problem here of course is not the Gparted live cd, any other install live cd, or my monitors, it is the NVIDIA graphics. So I guess I will have to forget about setting up my partitions with the Gparted live cd and that alone is not good. So if some how I do manage to get just one Linux distro installed, I still will never be able to boot my favorite Linux live cd system tools will I seeing none of them will boot now ? (Gparted, System Rescue, & Clonezilla) And please don't blame these three....it is NVIDIA !!! Which would be easier, figuring how to install in the text mode or returning the computer ? |
Quote:
Quote:
Quote:
Can't see an easy answer, since it's confusing as to what, exactly, you're trying to do, with what distro. Guess returning the computer would be the best. |
I use nvidia cards exclusively because of their great linux support. I have never encountered a problem like the one you describe other than with a bad card. Makes me wonder if your card is bad.
I also have never used a gparted live CD. In fact, I didn't know it existed until you mentioned it. So I can't help you there. However, gparted is found on most linux live CDs (I usually use Knoppix, myself) and you should be able to start a Linux Live CD in console mode if you want to. I just tested it, starting knoppix 6 in runlevel 2 (console only) with the command line (at the prompt in the live cd): Code:
knoppix 2 lang=en You say you are not familiar with the command line. Well, given your current situation, that is a problem. Your card IS supported, and quite well, by Nvidia. If you can't get it to start, either it is bad or for some obscure reason the distros you have tried don't support it. I assure you that Knoppix DOES support it; if Knoppix won't start your card, then it is more than likely defective. |
Quote:
I am sorry you find it hard to believe that I am able to milti-boot, but I won't hold that against you, I do appreciate all the suggestions, comments and help I have received here. The users on the LQ are the greatest and the forums are the greatest for sure....I am sorry I did not explain things as well as some may have needed, I am sure I am the problem. Best Wishes, obnascar |
Apparently there are some challenges with the nvidia GeForce 7050 card. I agree with jiml8 that your best bet is to install a Linux distribution in text mode, and then install the NVIDIA-Linux-x86-100.14.19-pkg1.run driver file.
Debian Sid might work automatically though (in a graphical install), if you really can't handle trying to install Linux via the command line. Debian Sid's xserver-xorg-video-nouveau package may work to make a graphical install possible (I'm not really sure, however). |
I took that new computer back and made sure I got one this time with Intel Graphics and everything works like a charm.......
|
Well, I guess that is one way to solve the problem...
|
I have the same video card running Vista:
"NVIDIA GeForce 7050/NVIDIA nForce 620i" driver provider: NVIDIA driver date: 09/07/2010 driver Version: 8.17.12.5896 http://www.linuxquestions.org/questi...s-newb-835770/ I don't see this card in the supported products list here http://www.nvidia.com/object/linux_d...100.14.19.html 1.Do the installation iso's that I've tried install in text mode? or do I have to download another iso? 2.Seeing as the above card is not on the supported products list should it be installed in text mode anyway? 3.Could I download NVIDIA-Linux-x86-100.14.19-pkg1.run to a usb stick and manually install it from said stick during a text install? I've never lost an argument with a computer - yet!!! |
Your graphicscard isn't supported with the 100.14.19-version of the driver, because it is a version for old graphic-cards. Use the 256.53-version and you will be fine.
|
All times are GMT -5. The time now is 11:48 AM. |