I have a PCI wireless card and when it's inserted will not show it's interrupt in /proc/interrupts
cheking the /var/log/messages turns up
No IRQ known for interrupt pin A of device 00:00.1.
I've googled on this and made two recommended changes.
Edited the grub.conf now reads
kernel /vmlinuz-2.4.18-14 ro root=LABEL=/ pci=biosirq
(I added the pci=biosirq)
and set a bios setting to Plug -n- Pray OS = no
I still have no luck...
More info:
]# /proc/pci
lists the PCI device with IRQ9
it's not in /proc/interrupts
]# lspci -vvx
also finds the device
Below is the end result
[root@localhost root]# modprobe prism2_pci
/lib/modules/2.4.18-14/net/prism2_pci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.18-14/net/prism2_pci.o: insmod /lib/modules/2.4.18-14/net/prism2_pci.o failed
/lib/modules/2.4.18-14/net/prism2_pci.o: insmod prism2_pci failed
