Hi, I at trying to get my Intuos 3 installed on Debian Lenny AMD64. I installed both the xserver-xorg-input-wacom and wacom-tools. The problem is that the tablet works like a mouse. I have to press down and move the pen for it to work. In Windows, I can just hover over the tablet without making contact and it will move the cursor. Also, it isn't calibrated to the screen.
I put "wacom" in /etc/modules. Any help would be greatly appreciated.
Here is my xorg.conf though I'm pretty sure the problem doesn't lie here. I've spent hours searching for answers but I can't find any.
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 (buildmeister@builder103.nvidia.com) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Type" "stylus"
Option "Mode" "Absolute"
Option "USB" "on"
Option "Threshold" "3"
Option "Tilt" "on"
Option "Device" "/dev/input/wacom"
EndSection
Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Type" "eraser"
Option "Mode" "Absolute"
Option "USB" "on"
Option "Tilt" "on"
Option "Threshold" "3"
Option "Device" "/dev/input/wacom"
EndSection
Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Type" "cursor"
Option "Mode" "Relative"
Option "USB" "on"
Option "Threshold" "3"
Option "Device" "/dev/input/wacom"
EndSection
Section "InputDevice"
Identifier "pad"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "pad"
Option "USB" "on"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
InputDevice "stylus" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "pad"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Option "RenderAccel" "true"
Option "TwinView"
#Option "MetaModes" "1280x1024" "1280x1024"
Option "TwinViewOrientation" "LeftOf"
EndSubSection
EndSection
