Hi ,

am trying mount EXT3-fs on CF using IDE Interface.
Every time when i do some opearation with CF like partioning / mounting / crating directories /files always i get these messeges on console. Any idea how the Interrupt associated with ATA/IDE devies handled.
Pls find the message dumps below.

Kind Regards,
Rangaraju.

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx IDE phys mem : ebbfd000...ebbfdfff (size 00000fff)
hdc: SanDisk SDCFJ-512, ATA DISK drive
ide1 at 0xf5021000-0xf5021007,0xf502100e on irq 10
hdc: 1000944 sectors (512 MB) w/1KiB Cache, CHS=993/16/63 Partition check:
/dev/ide/host1/bus0/target0/lun0:ide1: start_request: current=0xefc76924
hdc: do_special: 0xe0
hdc: lost interrupt
ide1: start_request: current=0xefc76924
hdc: do_special: 0x60
hdc: lost interrupt
ide1: start_request: current=0xefc76924
hdc: do_special: 0x20
hdc: lost interrupt
ide1: start_request: current=0xefc76924
hdc: lost interrupt
hdc: lost interrupt
unknown partition table
Looking up port of RPC 100003/2 on 10.10.10.22


# cp uImage uImage01
hdc: lost interrupt
ide1: start_request: current=0xefc76924
hdc: lost interrupt
ide1: start_request: current=0xefc76924
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
ide1: start_request: current=0xefc76984
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
ide1: start_request: current=0xefc76924
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
hdc: lost interrupt
ide1: start_request: current=0xefc76984
hdc: lost interrupt
ide1: start_request: current=0xefc76864
hdc: lost interrupt
ide1: start_request: current=0xefc76984
hdc: lost interrupt
ide1: start_request: current=0xefc76804
hdc: lost interrupt
hdc: lost interrupt
ide1: start_request: current=0xefc768c4
hdc: lost interrupt
ide1: start_request: current=0xefc76864
hdc: lost interrupt
hdc: lost interrupt