LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Intel P965 chipset support (https://www.linuxquestions.org/questions/linux-hardware-18/intel-p965-chipset-support-499007/)

turkeybrain 11-06-2006 01:30 AM

Intel P965 chipset support
 
I am currently considering a new system (here), but I have noticed the chipset is an Intel P965. I did a bit of research on it and discovered it seems to have PATA support problems. I want to know, is it possible to get around them, or should I skip this computer for this reason. Thanks for the help...

GrueMaster 11-06-2006 02:07 AM

My understanding was that Intel motherboards with this chipset had a Marvell PATA IDE controller strapped on for legacy support. When I was testing them, I had issues with dvd drives on that controller, but I had pre-release systems with pre-release bios's. The bios was supposed to be fixed before production, but I never had a chance to test it.

The 965 chipset and ICH8 in particular was supposed to remove legacy IDE support for cost reduction/performance reasons, but the manufacturers of DVD's haven't been very quick to adopt SATA (I think the term was "lazy").

Third party motherboards may have a different solution, or they may have an improved bios. Probably the easiest thing to do would be to test a boot dvd/cd on a system with this motherboard. The description of the system doesn't state the manufacturer or anything else about the board (HDA Audio doesn't tell you if it is a codec supported by alsa, for example). I'd contact the company and ask for some more information, then do a little research.

Weedman 11-06-2006 02:08 AM

P965 seems to have support in the latest 2.6.18 kernel, but I don't know of a distro that is that far up to date except Gentoo.

As for PATA support, well, who knows?

weed

Weedman 11-06-2006 02:13 AM

GrueMaster,

AFAIK, I think that the board might have on of the JBMicro IDE controller, to serve the same purpose as the Marvon chipset you discussed before.

Also AFAIK, the JBMicro chipset is not supported under any Linux distro, possibly even with the latest 'git' revision of the kernel.

weed

turkeybrain 11-06-2006 02:14 AM

I have already contacted the company. This was their reply:

"Unfortunately we do not release the exact specs as these are subject to change according to stock levels, HOWEVER all chipsets for motherboard gfx etc and general specs stay the same but models/brands can change."

I suppose its reasonable, but still not very useful! So it seems that more research is out of the question.

Stew-W 11-07-2006 07:07 AM

I'm trying to install Fedora core 6 onto a SATA drive connected to an Intel board with 965 / ICH8 chipset and getting no-where fast.

It just isn't detecting it. I'm using the DVD iso and the kernel used is (to the best of my knowledge)2.6.18, which should have the most recent libata and SATA drivers.
(From my internet research this morning :study: )

I've also tried toggling the HDD to 'legacy' in the bios to try and make it look like PATA and that hasn't helped.

It looks like intel may have some driver support but it seems to be only available to members of their resellers scheme:mad:

I'll keep plugging away and let you know if I find a solution.

GrueMaster 11-07-2006 10:21 AM

Setw-w: Which board do you have? If it is an Intel boxed motherboard, try setting the SATA to AHDI. It uses a different driver than ata_piix.

Stew-W 11-07-2006 11:35 AM

It is a DG965WH boxed Intel board and a Samsung SATA HDD.

I though the SATA was AHDI by default in the BIOS but I'll double check and try it again.

I confess this is only the second Linux install I've done. The other one was a dual boot with XP which went agood deal smoother.:)

GrueMaster 11-10-2006 04:15 AM

I'm actually surprised it doesn't work. This was the board I used to develop the 7.1 channel audio support shortly before my contract ended.

Not sure if it will help, but try updating the bios to the latest version. Beyond that, I'd email Intel and complain.

valnar 11-11-2006 01:11 PM

Well, the Intel Core2Duo's are superior in every way to AMD's latest offering, but since that link shows you interested in the "slowest" of the C2D lineup, you could actually buy an AMD Athlon64 X2 dual-core CPU without taking a speed hit. It's only the higher-end Intel CPU's that start blowing AMD out of the water. And who knows, in a few months time, AMD will a better CPU available that will go into an AM2 socket mobo.

So I would normally recommend the C2D CPU's to most people, especially if running Windows, but if you need solid Linux support NOW, I'd get an AMD X2 with an nVidia nForce chipset.

Sticking with the same company, this looks good.
http://www.scorptec.com.au/system/49

Robert

Edit: It may still be beneficial to get a PATA(IDE) HDD "just in case". Many posts here say SATA works fine; some say it doesn't. YMMV.

diesellayer 11-12-2006 10:55 AM

GUYS, I also have a DP965LT board, and before I cant install Fedora6. I have a Liteon DVDRW and SATA HDrive, and Radeon ATI PCX 16x. When I boot my PC on DVDROM using the FEDORA6 installer, I was trap asking for the driver. I was being ask for the SATA drive and the location of the source image. Been browsing the web and found what I was looking for. Solution;
When booted from CD/DVD and been ask for option like PRESS ENTER TO install in GUI or Type-in 'linux text' to install in console or some kind of that. Well what I did was to Type-in
> linux all-generic-ide
then presto. My installation was successful.

But here is my new problem. I am really new to Linux and just been browsing on the word 'HOW TO' stuff. I installed a D-link internal modem, and also the build-in sounds are not working, though fedora detected a device but using other driver which leads to not working sound. I dont know what is the equivalent process in linux as the 'ADD REMOVE HARDWARE' in windows.
I will be reading much about Linux from now on, but can anyone guide me to a specific guide for this task I first want to learn.
Thank you in advance.

Ding

GrueMaster 11-12-2006 12:25 PM

Quote:

Originally Posted by diesellayer
But here is my new problem. I am really new to Linux and just been browsing on the word 'HOW TO' stuff. I installed a D-link internal modem, and also the build-in sounds are not working, though fedora detected a device but using other driver which leads to not working sound. I dont know what is the equivalent process in linux as the 'ADD REMOVE HARDWARE' in windows.
I will be reading much about Linux from now on, but can anyone guide me to a specific guide for this task I first want to learn.
Thank you in advance.

What sound driver did it load? What version of alsa? I wrote the driver code for this board, and it should work as of alsa-driver-1.0.12.

Tobin

KimVette 11-12-2006 06:12 PM

Quote:

Originally Posted by Weedman
Also AFAIK, the JBMicro chipset is not supported under any Linux distro, possibly even with the latest 'git' revision of the kernel.

Works wonderfully on the P5B Deluxe w/Wi-Fi board, using the 2.6.18 kernel.

What DOESN'T work well is the second Marvell ethernet port. :(

Stew-W 11-16-2006 06:00 AM

Quote:

Originally Posted by diesellayer
GUYS, I also have a DP965LT board, and before I cant install Fedora6. I have a Liteon DVDRW and SATA HDrive, and Radeon ATI PCX 16x. When I boot my PC on DVDROM using the FEDORA6 installer, I was trap asking for the driver. I was being ask for the SATA drive and the location of the source image. Been browsing the web and found what I was looking for. Solution;
When booted from CD/DVD and been ask for option like PRESS ENTER TO install in GUI or Type-in 'linux text' to install in console or some kind of that. Well what I did was to Type-in
> linux all-generic-ide
then presto. My installation was successful.

Ding

Just tried that and it solved the problem:cool:

Gruemaster: The GUI installer picked up the onboard audio chipset but wasn't able to play sound. I only used stereo earbuds to check it not a full 7.1 set up though.
The machine will be running modelling codes so not having sound is no problem.

EDIT: Just tried another two installs and there were no problems with the audio from the sound card. On the failure I reached the screen similar to the one shown here, but the drop down menu was blank.
The other two gave me the option of analogue or digital sound, and the sound played correctly :)

turkeybrain 11-17-2006 04:54 AM

Valnar, I've still been looking around at other sites as well. I found this one, which seems to me to be a really good deal (cheap with lots of features, like a 7950GT) here

I still want to have a look around locally, its just I haven't had the time as of yet. Would anyone know if this chipset happens to be alright?

*edit* I feel stupid now, I've just noticed that site is in USD, compared to what I usually run, AUD. So in other words, the link above is way out of my price range! */edit*


All times are GMT -5. The time now is 10:28 AM.