I'm attempting to use my wireless ethernet card under linux.
I've installed ndiswrapper and it _appears_ to work but,
... It won't pick up my network that I've setup.
The card works perfectly under Windows (therefore the card must be fine).
My wireless network is also found under Windows (my router is configured properly)
If it would be possible for anyone to give me a solution or even useful information
I would highly appreciate it.
Thank you
Rick Fry/OmniKamikaze
OmniKamikaze@comcast.net
------------------------------------------------------------------------------------------------------------------------------
Other information:
------------------------------------------------------------------------------------------------------------------------------
Computer:
HP Pavilion ZT3000
/etc/init.d/network start output:
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
Bringing up interface wlan0: Determining IP information for wlan0... failed; no link present. Check cable?
lspci output:
02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
operating system:
Manrake Linux 10.0 (RC1)
kernel 2.6.2-3mdk