| yvlasenko |
08-15-2007 02:28 AM |
Infortrend ES A24U-G2421-1 + Adaptec 29320A vs Gentoo
Hi everybody!
I was trying to connect Infortrend external raid to linux box, but system doesn't see any drives.
It's my first expirience with scsi so any help would be appriciated.
Raid is configured as 8x raid5 (3 drives each, 24 total).
This is part of my dmesg:
Quote:
localhost ~ # dmesg | grep scsi
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
scsi0:A:0: no active SCB for reconnecting target - issuing BUS DEVICE RESET
scsi0: Dumping Card State at program address 0x161 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x1ba, DINDEX = 0x1b8
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
scsi0:A:0:0: Target did not send an IDENTIFY message. LASTPHASE = 0x40.
scsi0: Issued Channel A Bus Reset. 1 SCBs aborted
scsi0: Unexpected PKT busfree condition
scsi0: Dumping Card State at program address 0x1b2 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x106, DINDEX = 0x106
scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff6f
scsi 0:0:2:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x 0
scsi0: At time of recovery, card was not paused
scsi0: Dumping Card State at program address 0x3 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x106, DINDEX = 0x106
scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff6f
scsi 0:0:2:0: Unable to deliver message
scsi0: Command abort returning 0x2003
scsi 0:0:2:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0 x24 0x0
scsi0: Device reset code sleeping
(scsi0:A:2:0): Bus Device Reset Message Sent
scsi0: device overrun (status 9) on 0:2:0
scsi0: Device reset returning 0x2002
scsi0:A:0: no active SCB for reconnecting target - issuing BUS DEVICE RESET
scsi0: Dumping Card State at program address 0x161 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x1ba, DINDEX = 0x1b8
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
scsi0:A:0:0: Target did not send an IDENTIFY message. LASTPHASE = 0xc0.
scsi0:A:0:0: Protocol violation in Status phase. Attempting to abort.
scsi0:A:0:0: Abort for unidentified connection completed.
scsi 0:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
scsi0: Dumping Card State at program address 0x31 Mode 0x11
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0x3, SINDEX = 0x1ff, DINDEX = 0x1b8
scsi0: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff79
(scsi0:A:2:0): Device is disconnected, re-queuing SCB
scsi0: Recovery code sleeping
(scsi0:A:2:0): Abort Message Sent
(scsi0:A:2:0): SCB 3 - Abort Tag Completed.
scsi0: device overrun (status 9) on 0:2:0
scsi0:A:0: no active SCB for reconnecting target - issuing BUS DEVICE RESET
scsi0: Dumping Card State at program address 0x161 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x1ba, DINDEX = 0x1b8
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
scsi0:A:0:0: Target did not send an IDENTIFY message. LASTPHASE = 0xc0.
scsi0:A:0:0: Protocol violation in Status phase. Attempting to abort.
scsi0:A:0:0: Abort for unidentified connection completed.
scsi 0:0:2:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0 0x0 0x0
scsi0: At time of recovery, card was not paused
scsi0: Dumping Card State at program address 0x18 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x1ff, DINDEX = 0x1b8
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
(scsi0:A:2:0): Device is disconnected, re-queuing SCB
scsi0: Recovery code sleeping
(scsi0:A:2:0): Abort Message Sent
(scsi0:A:2:0): SCB 3 - Abort Tag Completed.
scsi0: device overrun (status 9) on 0:2:0
scsi 0:0:2:0: scsi: Device offlined - not ready after error recovery
scsi0:A:0: no active SCB for reconnecting target - issuing BUS DEVICE RESET
scsi0: Dumping Card State at program address 0x161 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x1ba, DINDEX = 0x1b8
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
scsi0:A:0:0: Target did not send an IDENTIFY message. LASTPHASE = 0x40.
scsi0: Issued Channel A Bus Reset. 1 SCBs aborted
scsi0: Unexpected PKT busfree condition
scsi0: Dumping Card State at program address 0x1b2 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x10a, DINDEX = 0x10a
scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff79
scsi 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x12 0x0 0x0 0x0 0x24 0x 0
scsi0: At time of recovery, card was not paused
scsi0: Dumping Card State at program address 0x18 Mode 0x33
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
scsi0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
scsi0: REG0 == 0xff00, SINDEX = 0x10a, DINDEX = 0x10a
scsi0: SCBPTR == 0x3, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff79
scsi 0:0:4:0: Unable to deliver message
scsi0: Command abort returning 0x2003
scsi 0:0:4:0: Attempting to queue a TARGET RESET message:CDB: 0x12 0x0 0x0 0x0 0 x24 0x0
scsi0: Device reset code sleeping
(scsi0:A:4:0): Bus Device Reset Message Sent
scsi0: device overrun (status 9) on 0:4:0
scsi0: Device reset returning 0x2002
scsi1 : ata_piix
scsi2 : ata_pii
|
If anything else would help - just let me know please. |
