FC9 full installation works fine from a FC9 DVD but
I have 2 DVDROMs that both are not detected when I login to FC9.

1- IDE Sony 52/52/52/16 DVDROM combo
2- IDE Pioneer DVDWriter

etc/fstab :
/dev/VolGroup00/LogVol00 / ext3 defaults 1 1
UUID=44a4815b-63d5-406b-a5a3-1a0ea5c103ac /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/VolGroup00/LogVol01 swap swap defaults 0 0

etc/mtab :
/dev/mapper/VolGroup00-LogVol00 / ext3 rw 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
/dev/sdb1 /boot ext3 rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
fusectl /sys/fs/fuse/connections fusectl rw 0 0
gvfs-fuse-daemon /root/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev 0 0
/dev/sda1 /media/WVU fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0
/dev/sdc1 /media/Win2008Server fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0

I am a newbie and I dont know exactly what these files are.
Please give me step by step instructions on how to solve the problem.

/sbin/lspci :
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1)
02:00.0 Ethernet controller: Attansic Technology Corp. L1 Gigabit Ethernet Adapter (rev b0)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)
05:00.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
05:01.0 Communication controller: Intel Corporation 536EP Data Fax Modem

uname -r :
2.6.25-14.fc9.i686

This is essentially a duplicate of http://www.linuxquestions.org/questi...in-fc9-657993/

One question, one post Leon.

1- its related to both forums so i thought (maybe i was wrong) that it may help active memmbers of each forum to see the question and i get different replies from them.

2- heres a hardware related and needs different Info about the problem and as u see the lspci and uname are not mentioned in FC9 post cause they may not be interested but heres theres a thread "Before u post here" or something like this that asks for more precise Info SO No the posts are not the Same completely and they just refer to the same problem with different contents in them.

stress_junkie is correct. You need to pick one forum and post there. If a mod thinks it's in the wrong place one of us will move it. Or if you need it to be moved, you can hit the report button and request it be moved. I think this is in the most appropriate place, so I am closing the one in Fedora.

But still my problem not solved. any1 please how to mount my drives!?

what does dmesg show? Does it show any error messages linked to either drive?