LinuxQuestions.org
Latest LQ Deal: Latest LQ Deals
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 08-10-2004, 04:09 PM   #1
Boudewijn
Member
 
Registered: Nov 2003
Location: The Netherlands
Distribution: MDK: 10,10.1,10_amd64,9.2,9.1 . Debian: sarge,woody, Gentoo (X86 amd64 Sparc)
Posts: 219

Rep: Reputation: 30
How to speed up SATA disks


Hi,

I've got a k8v motherboard, and I'm using the onboard Promise R20378 RAID controller, with 2 seagate 120gb s-ata disks in a RAID0 environment.

Although these disks should be quite fast, they just have a throughput of about 4mb per sec (a piece). I've tried using them without RAID, but that has no impact on the performance.

After that, I used hdparm trying to improve performance. But this didn't work out because my Mandrake 10.0 (2.6.x kernels and 2.6.8.0 rc2 too) recognizes the disks as scsi, which is 'self-optimizing'.

How can I improve the speed of those drives?
 
Old 08-11-2004, 01:16 AM   #2
tadpole
LQ Newbie
 
Registered: Jul 2004
Posts: 10

Rep: Reputation: 0
go with xp K!
 
Old 08-11-2004, 01:34 AM   #3
Electro
LQ Guru
 
Registered: Jan 2002
Posts: 6,042

Rep: Reputation: Disabled
What I read Seagate and SATA does not mix well. Its like water and oil. Also Promise SATA controllers makes this even worse. You can sell those to some fool on ebay and buy Western Digital hard drives. If you want to keep them, you can do some tweaking in the proc directory be echoing some text.
 
Old 08-11-2004, 02:47 AM   #4
hw-tph
Senior Member
 
Registered: Sep 2003
Location: Sweden
Distribution: Debian
Posts: 3,032

Rep: Reputation: 58
My Seagates SATA Barracudas are doing just fine, thank you. I have yet to come across a storage problem that is related to the disks themselves rather than the controller or driver. To me, suggesting selling the disks as a first measure sounds pretty harsh - trying to analyze the problem before going with a notion you seem to have no first hand experience of might be a good idea.

So Boudewijn, could you please post your dmesg output regarding the IDE controllers and disks? The SATA driver to use should be ft3xx (FastTrack) IIRC.


Håkan
 
Old 08-11-2004, 11:24 AM   #5
Boudewijn
Member
 
Registered: Nov 2003
Location: The Netherlands
Distribution: MDK: 10,10.1,10_amd64,9.2,9.1 . Debian: sarge,woody, Gentoo (X86 amd64 Sparc)
Posts: 219

Original Poster
Rep: Reputation: 30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddio
hda: ASUS DVD-ROM DVD-E616P 0104, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ATAPI DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15


RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem initialized
libata version 1.02 loaded.
sata_promise version 1.00
ata1: SATA max UDMA/133 cmd 0xE09D8200 ctl 0xE09D8238 bmdma 0x0 irq 18
ata2: SATA max UDMA/133 cmd 0xE09D8280 ctl 0xE09D82B8 bmdma 0x0 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
ata1: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
ata2: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_promise
Vendor: ATA Model: ST3120026AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3120026AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
sata_via version 0.20
sata_via(0000:00:0f.0): routed to hard irq line 4
ata3: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD000 irq 20
ata4: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xD008 irq 20
ata3: no device found (phy stat 00000000)
scsi2 : sata_via
ata4: no device found (phy stat 00000000)
scsi3 : sata_via
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0


Do you mean this?


This is the whole output:


code, 8512k reserved, 866k data, 272k init, 0k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3956.73 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 27.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 A9
11 001 01 1 1 0 1 0 1 1 B1
12 001 01 1 1 0 1 0 1 1 B9
13 001 01 1 1 0 1 0 1 1 C1
14 001 01 1 1 0 1 0 1 1 C9
15 001 01 1 1 0 1 0 1 1 D1
16 016 06 1 0 0 0 0 1 2 20
17 033 03 1 0 0 0 0 1 2 96
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ21 -> 0:21
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2002.0260 MHz.
..... host bus clock speed is 200.0226 MHz.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 212k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3227] at 0000:00:11.0
PCI->APIC IRQ transform: (B0,I7,P0) -> 16
PCI->APIC IRQ transform: (B0,I8,P0) -> 18
PCI->APIC IRQ transform: (B0,I10,P0) -> 17
PCI->APIC IRQ transform: (B0,I12,P0) -> 17
PCI->APIC IRQ transform: (B0,I12,P1) -> 18
PCI->APIC IRQ transform: (B0,I14,P0) -> 19
PCI->APIC IRQ transform: (B0,I15,P0) -> 20
PCI->APIC IRQ transform: (B0,I15,P0) -> 20
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P2) -> 21
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
vesafb: framebuffer at 0xe8000000, mapped to 0xe0800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:ef40
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
audit: initializing netlink socket (disabled)
audit(1092177604.834:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
bootsplash 3.1.4-2004/02/19-spock-0.1: looking for picture.... silentjpeg size 14856 bytes, found (800x600, 14808 bytes, v3).
Console: switching to colour frame buffer device 92x32
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddio
hda: ASUS DVD-ROM DVD-E616P 0104, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: ATAPI DVD DUAL 4XMax, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS2++ Logitech MX Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
Resume Machine: resuming from /dev/sda5
Resuming from device unknown-block(0,0)
Resume Machine: Error -6 resuming
PM: Reading pmdisk image.
PM: Resume from disk failed.
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem initialized
libata version 1.02 loaded.
sata_promise version 1.00
ata1: SATA max UDMA/133 cmd 0xE09D8200 ctl 0xE09D8238 bmdma 0x0 irq 18
ata2: SATA max UDMA/133 cmd 0xE09D8280 ctl 0xE09D82B8 bmdma 0x0 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
ata1: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_promise
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
ata2: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_promise
Vendor: ATA Model: ST3120026AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3120026AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
sata_via version 0.20
sata_via(0000:00:0f.0): routed to hard irq line 4
ata3: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD000 irq 20
ata4: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xD008 irq 20
ata3: no device found (phy stat 00000000)
scsi2 : sata_via
ata4: no device found (phy stat 00000000)
scsi3 : sata_via
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 272k freed
Real Time Clock Driver v1.12
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 21, io base 0000b400
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 21, io base 0000b800
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 21, io base 0000c000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
uhci_hcd 0000:00:10.3: irq 21, io base 0000c400
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: irq 21, pci mem e09e1000
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
EXT3 FS on sda1, internal journal
Adding 1092380k swap on /dev/sda5. Priority:-1 extents:1
ieee1394: Initialized config rom entry `ip1394'
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xf8000000
md: raidstart(pid 961) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6
md: autorun ...
md: considering sda6 ...
md: adding sda6 ...
md: adding sdb5 ...
md: created md0
md: bind<sdb5>
md: bind<sda6>
md: running: <sda6><sdb5>
md: raid0 personality registered as nr 2
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sda6
raid0: comparing sda6(61432448) with sda6(61432448)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb5
raid0: comparing sdb5(61432448) with sda6(61432448)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 122864896 blocks.
raid0 : conf->hash_spacing is 122864896 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: ... autorun DONE.
md: raidstart(pid 970) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6
md: autorun ...
md: considering sda7 ...
md: adding sda7 ...
md: adding sdb6 ...
md: created md1
md: bind<sdb6>
md: bind<sda7>
md: running: <sda7><sdb6>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sda7
raid0: comparing sda7(10233280) with sda7(10233280)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb6
raid0: comparing sdb6(10233280) with sda7(10233280)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 20466560 blocks.
raid0 : conf->hash_spacing is 20466560 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: ... autorun DONE.
md: raidstart(pid 990) used deprecated START_ARRAY ioctl. This will not be supported beyond 2.6
md: autorun ...
md: considering sda8 ...
md: adding sda8 ...
md: adding sdb7 ...
md: created md4
md: bind<sdb7>
md: bind<sda8>
md: running: <sda8><sdb7>
md: raid1 personality registered as nr 3
raid1: raid set md4 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Supermount version 2.0.4 for kernel 2.6
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f7600000-f76007ff] Max Packet=[2048]
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f7b00000-f7b007ff] Max Packet=[2048]
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host1)
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000031499b]
sk98lin: Network Device Driver v6.23
(C)Copyright 1999-2004 Marvell(R).
eth2: 3Com Gigabit LOM (3C940)
PrefPort:A RlmtMode:Check Link State
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:00:0e.0: 3Com PCI 3c905C Tornado at 0xb000. Vers LK1.1.19
ieee1394: Host added: ID:BUS[1-01:1023] GUID[00023c0021052eb5]
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4089 buckets, 32712 max) - 328 bytes per conntrack
inserting floppy driver for 2.6.8-0.rc2.1mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0367e00(lo)
IPv6 over IPv4 tunneling driver
mtrr: 0xe8000000,0x8000000 overlaps existing 0xe8000000,0x100000
parport0: PC-style at 0x378 [PCSPP]
lp0: using parport0 (polling).
lp0: console ready
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
eth3: no IPv6 routers present
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
eth3: no IPv6 routers present
Disabled Privacy Extensions on device c0367e00(lo)
eth3: no IPv6 routers present
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0



Thank you in advance
 
Old 08-13-2004, 10:41 AM   #6
Boudewijn
Member
 
Registered: Nov 2003
Location: The Netherlands
Distribution: MDK: 10,10.1,10_amd64,9.2,9.1 . Debian: sarge,woody, Gentoo (X86 amd64 Sparc)
Posts: 219

Original Poster
Rep: Reputation: 30
Does anyone have soms tips?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
installing SuSE 9.1 with SATA disks???? skunkcabbage SUSE / openSUSE 10 04-19-2005 06:24 AM
Old motherboard(ASUS CUV4X) and new SATA disks svar Slackware 2 02-18-2005 01:09 AM
IDE and SATA disks flupke_chello Linux - Hardware 1 01-24-2005 12:54 PM
how to mount 2 SATA RAID0 disks student04 Linux - Hardware 7 01-08-2005 04:04 PM
Suse on SATA & ATA disks Harold C. Linux - Hardware 0 09-17-2004 01:53 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 07:02 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration