Hi Folks,

I've recently made the jump from Windows to Linux :-) and I'm stil finding my feet!
I've got a Mesh Dynamo M11 laptopwhich has an ene 710/712/714 card reader built in.

When I put in a memory stick,nothing happens.

YasT identifies the device as follows
Any help to get it to work will be really appreciated!

cheers
Michael

26: PCI 204.0: 0607 CardBus bridge
[Created at pci.273]
Unique ID: UVH2.AXDPZtRybb6
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
SysFS BusID: 0000:02:04.0
Hardware Class: bridge
Model: "Mitac CB-710/2/4 Cardbus Controller"
Vendor: pci 0x1524 "ENE Technology Inc"
Device: pci 0x1411 "CB-710/2/4 Cardbus Controller"
SubVendor: pci 0x1071 "Mitac"
SubDevice: pci 0x8052
Driver: "yenta_cardbus"
Memory Range: 0x20001000-0x20001fff (rw,non-prefetchable)
IRQ: 5 (5717 events)
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

27: PCI 204.1: 0501 FLASH memory
[Created at pci.273]
Unique ID: Mqmt.RrDahi+iqE8
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.1
SysFS BusID: 0000:02:04.1
Hardware Class: unknown
Model: "Mitac FLASH memory"
Vendor: pci 0x1524 "ENE Technology Inc"
Device: pci 0x0530
SubVendor: pci 0x1071 "Mitac"
SubDevice: pci 0x8052
Memory Range: 0xd0000800-0xd000087f (rw,non-prefetchable)
IRQ: 11 (no events)
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

29: PCI 204.3: 0501 FLASH memory
[Created at pci.273]
Unique ID: 5UlY.BD7b+a6RP62
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.3
SysFS BusID: 0000:02:04.3
Hardware Class: unknown
Model: "Mitac FLASH memory"
Vendor: pci 0x1524 "ENE Technology Inc"
Device: pci 0x0520
SubVendor: pci 0x1071 "Mitac"
SubDevice: pci 0x8052
Memory Range: 0xd0000a00-0xd0000a7f (rw,non-prefetchable)
IRQ: 11 (no events)
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)