LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   HD is dead / Do i have hope / what HD reaper tools i need? (https://www.linuxquestions.org/questions/linux-hardware-18/hd-is-dead-do-i-have-hope-what-hd-reaper-tools-i-need-365121/)

Waffa 09-20-2005 01:02 AM

HD is dead / Do i have hope / what HD reaper tools i need?
 
Please excuse my boor English.

1.
44 pin 2.5” to PC 40 pin IDE ( www mycableshop .com/300x300/IDE4044_300.jpg ) internal and 2.5”/ 5.25" IDE to USB external kit (www usbfirewire .com/Parts/rr-usb-usb2ide.html ). I lose this green part ( needed for notebook hard drives) from last product & because I was to lazy to shutdown the computer to use internal kit, I take the first product, plug it to the notebook HD & then connect the USB IDE cable as it would connect to usual 5.25” drive, unfortunately, I did not pay attention & connected one of the connectors (or bought) wrong because they fit every way. It did not work.. so I try every possible combination, not thinking that this could damage hard drive - & surprise surprise – it did! Now when I installed notebook hard drive back – notebook did not even recognize hard drive from BIOS & like this would not be enough I did same thing whit next hard drive (first I thought that hard drive stop working on different reasons).

2.
Anyway, I hope/think that only the electronic is screwed on HD, or could this totally erase everything I had on HD? How good are my chances that if I buy new similar hard drive – I get it up & running after I replace the electronic part? HD do not have any clicking sound or anything, just seems dead. One is IBM other one is Samsung
If I can not find exactly same HD, what are most important parameters besides shape I should look ( Size, cylinders, LBA etc)?
Do I need to set jumpers on 2.5” while I working whit IDE to USB adapter?

3.
Because I do not have manual for eighter of them, I wonder what is the correct way to connect them, internal one have on one side “B” on left & Nr “1 ->” with arrow on right, other side of “B” I have “R”, and second tool USB IDE have just arrow on left & right & that’s all. How should I connect it??

4.
I am tech @ my self, and I would be interested to buy hard drive reaper / recovery hard and software, and maybe training, what tools should I look for? I have huge box full of broken hard drives where I would like to try to fix / recover on training purposes.

5.
Professional data recovery is way to expensive, but about how much my notebook HD reaper would cost me? I have there some documents I would like to get back, around 3-4 Gigs.

Thanks !

J.W. 09-21-2005 12:54 PM

Please do not post the same thread in more than one forum. Picking the most relevant forum and posting it once there makes it easier for other members to help you and keeps the discussion all in one place.

http://www.linuxquestions.org/rules.php

Please continue here Thanks -- J.W.


All times are GMT -5. The time now is 04:44 AM.