hey guys! be sure to visit the hardware compatibility section of the website. it's on the upper left hand corner of the home page. or click on :

http://www.linuxquestions.org/hcl/index.php

be sure to add your system and comments to the sections that apply to your hardware. let everyone else know what problems you had and what you have found to work with your configurations.

thanks

chris

just friendly note, this thread has been addressed as a sticky in this forum located here

http://www.linuxquestions.org/questi...hreadid=113220

it's the fourth thread from the top. i guess it doesn't hurt anything to remind everyone.

yeah, i would like to add to the comments on the HCL entry for my motherboard, but i can't maybe someone can at least add this for me..

for ASUS K8V SE DELUXE (probably same as existing K8V entry) the lspci is:


00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3188 (rev
01)
Subsystem: Asustek Computer, Inc.: Unknown device 80a3
Flags: bus master, 66Mhz, medium devsel, latency 8
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities:

00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b188
(prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fcd00000-fd2fffff
Prefetchable memory behind bridge: cff00000-efefffff
Capabilities:

00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 808a
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at fda00000 (32-bit, non-prefetchable) [size=2K]
I/O ports at cc00 [size=128]
Capabilities:

00:08.0 RAID bus controller: Promise Technology, Inc.: Unknown device
3373 (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 80f5
Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 18
I/O ports at b000 [size=64]
I/O ports at ec00 [size=16]
I/O ports at dc00 [size=128]
Memory at fdc00000 (32-bit, non-prefetchable) [size=4K]
Memory at fdb00000 (32-bit, non-prefetchable) [size=128K]
Capabilities:

00:0a.0 Ethernet controller: Galileo Technology Ltd.: Unknown device
4320 (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 811a
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 17
Memory at fde00000 (32-bit, non-prefetchable) [size=16K]
I/O ports at b400 [size=256]
Expansion ROM at fdd00000 [disabled] [size=128K]
Capabilities:

00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device
3149 (rev 80)
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 64, IRQ 20
I/O ports at e800 [size=8]
I/O ports at e400 [size=4]
I/O ports at e000 [size=8]
I/O ports at d800 [size=4]
I/O ports at d400 [size=16]
I/O ports at d000 [size=256]
Capabilities:

00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP
PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at fc00 [size=16]
Capabilities:

00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at b800 [size=32]
Capabilities:

00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c000 [size=32]
Capabilities:

00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c400 [size=32]
Capabilities:

00:10.3 USB Controller: VIA Technologies, Inc. USB (rev 81) (prog-if 00
[UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c800 [size=32]
Capabilities:

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
(prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at fdf00000 (32-bit, non-prefetchable) [size=256]
Capabilities:

00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3227
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, stepping, medium devsel, latency 0
Capabilities:

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel
Capabilities:

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Flags: fast devsel

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350
[Radeon 9800] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0002
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64, IRQ 16
Memory at e0000000 (32-bit, prefetchable) [size=128M]
I/O ports at a000 [size=256]
Memory at fd200000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at fd100000 [disabled] [size=128K]
Capabilities:

01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon
9800] (Secondary)
Subsystem: ATI Technologies Inc: Unknown device 0003
Flags: bus master, stepping, 66Mhz, medium devsel, latency 64
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at fd000000 (32-bit, non-prefetchable) [size=64K]
Capabilities:

newellrp1, you're not able to post in the HCL?

--jeremy

nope i dont think so... i found my mobo, but there's nothing there buttonwise to let me add to the writeup

newellrp1, please DO NOT spam the forums like that again - the post has been removed.

--jeremy

like what? are you referring to my trying to raise my posts on the general forum so i could post url's? well it will never happen again since i have 5 posts. it was my own little protest against the "5 posts to post urls policy"

Purposely circumventing a rule that you are are fully aware of isn't really appropriate. The fact that you titled the thread "spamming the forum" says enough.

--jeremy

i fully agree.