LinuxQuestions.org

LinuxQuestions.org (http://www.linuxquestions.org/questions/index.php)
-   Linux - Hardware (http://www.linuxquestions.org/questions/forumdisplay.php?f=18)
-   -   Hauppauge wintv-hvr h006 - dvb-t tuner - usb-stick - hybrid tv stick (http://www.linuxquestions.org/questions/showthread.php?t=4175442596)

Xeratul 12-22-2012 04:30 PM

Hauppauge wintv-hvr h006 - dvb-t tuner - usb-stick - hybrid tv stick
 
Hi,

I have tried these configurations:

HAUPPAUGE WINTV-HVR H006 - DVB-T TUNER - USB-STICK - HYBRID TV STICK


Code:

[ 3693.561062] eth1: no IPv6 routers present
[ 5168.004971] usb 1-2.3: USB disconnect, address 8
[ 5186.892548] usb 1-2.3: new high speed USB device using ehci_hcd and address 9
[ 5186.987091] usb 1-2.3: New USB device found, idVendor=2040, idProduct=b138
[ 5186.987108] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5186.987121] usb 1-2.3: Product: Hauppauge Device
[ 5186.987130] usb 1-2.3: Manufacturer: Hauppauge
[ 5186.987139] usb 1-2.3: SerialNumber: XXX
[ 5186.987498] usb 1-2.3: configuration #1 chosen from 1 choice



Code:

$ vlc
VLC media player 1.1.3 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Warning: call to signal(13, 0x1)
[0x9c5f0d4] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Blocked: call to setlocale(6, "")
Blocked: call to sigaction(17, 0xb69910d4, 0xb6991048)
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
[0x9e7237c] dvb access error: FrontEndOpen: opening device failed (No such file or directory)
[0x9d5581c] main input error: open of `dvb://frequency=0' failed: (null)
[0x9ed0434] dvb access error: FrontEndOpen: opening device failed (No such file or directory)
[0xb73066bc] main input error: open of `dvb://frequency=0' failed: (null)
[0x9ed2044] dvb access error: FrontEndOpen: opening device failed (No such file or directory)
[0x9ee0ccc] main input error: open of `dvb://frequency=0000' failed: (null)
[0x9edc1ec] dvb access error: FrontEndOpen: opening device failed (No such file or directory)
[0x9d3daa4] main input error: open of `dvb://frequency=0000' failed: (null)
[0x9ee1164] dvb access error: FrontEndOpen: opening device failed (No such file or directory)
[0x9ee100c] main input error: open of `dvb://frequency=0000' failed: (null)


I have tried the 3 possibilities of DVB DVB-C and DVB-T.

Would you know how to play anything ?

yours sincerely,
X.

teckk 12-22-2012 05:04 PM

I don't use VLC.
I can give you an overview how to use it, I use mplayer.
Same idea for any other player.

Make sure that you have software support for the device.
Code:

dmesg | tail
.....
[73892.944851] dvb-usb: Pinnacle PCTV HD USB Stick successfully initialized and connected.
[73892.945193] usbcore: registered new interface driver dvb_usb_dib0700

Then scan for channels from a channel list. An example for ATSC OTA
Code:

scan /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
Take the output of that and make a ~/.mplayer/channels.conf
Example
Code:

WSEC-TV:479028615:8VSB:49:52:1
WSEC-D2:479028615:8VSB:65:68:2
WSEC-D3:479028615:8VSB:81:84:3
WAND:491028615:8VSB:49:52:3
STORM:491028615:8VSB:65:68:4
WICS:641028615:8VSB:49:52:3
TCN:641028615:8VSB:65:68:4
WCIA:213028615:8VSB:65:68:4
WCIX:213028615:8VSB:49:52:3
WRSP:653028615:8VSB:49:52:3
METV:653028615:8VSB:65:68:4
HSN:587028615:8VSB:481:482:1
WBUI:521028615:8VSB:49:52:3
THIS:521028615:8VSB:65:68:4

Play a channel with
Code:

mplayer dvb://WSEC-TV
or
Code:

mplayer dvb://
Then use the h and k keys to move through the channels.

So you'll need a working tuner, software support on your machine for it, scan for channels to make a channel list for the player, use a player to play a channel.

Xeratul 12-23-2012 02:57 AM

Quote:

Originally Posted by teckk (Post 4855168)
I don't use VLC.
I can give you an overview how to use it, I use mplayer.
Same idea for any other player.

Make sure that you have software support for the device.
Code:

dmesg | tail
.....
[73892.944851] dvb-usb: Pinnacle PCTV HD USB Stick successfully initialized and connected.
[73892.945193] usbcore: registered new interface driver dvb_usb_dib0700

Then scan for channels from a channel list. An example for ATSC OTA
Code:

scan /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
Take the output of that and make a ~/.mplayer/channels.conf
Example
Code:

WSEC-TV:479028615:8VSB:49:52:1
WSEC-D2:479028615:8VSB:65:68:2
WSEC-D3:479028615:8VSB:81:84:3
WAND:491028615:8VSB:49:52:3
STORM:491028615:8VSB:65:68:4
WICS:641028615:8VSB:49:52:3
TCN:641028615:8VSB:65:68:4
WCIA:213028615:8VSB:65:68:4
WCIX:213028615:8VSB:49:52:3
WRSP:653028615:8VSB:49:52:3
METV:653028615:8VSB:65:68:4
HSN:587028615:8VSB:481:482:1
WBUI:521028615:8VSB:49:52:3
THIS:521028615:8VSB:65:68:4

Play a channel with
Code:

mplayer dvb://WSEC-TV
or
Code:

mplayer dvb://
Then use the h and k keys to move through the channels.

So you'll need a working tuner, software support on your machine for it, scan for channels to make a channel list for the player, use a player to play a channel.


thank you

I will try

if it is for france, would you have the channels (Tf1, ...)

regards / bonnes fetes

Xeratul 12-23-2012 03:05 AM

$ scan /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
scanning /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2284: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
xera@debian07:~$ dmesg | tail
[ 2036.694717] usb 1-1: USB disconnect, address 11
[ 2036.694735] usb 1-1.1: USB disconnect, address 12
[ 2036.754202] usb 1-1.2: USB disconnect, address 13
[ 2084.708154] usb 1-2: new high speed USB device using ehci_hcd and address 20
[ 2084.843145] usb 1-2: New USB device found, idVendor=2040, idProduct=b138
[ 2084.843162] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2084.843175] usb 1-2: Product: Hauppauge Device
[ 2084.843184] usb 1-2: Manufacturer: Hauppauge
[ 2084.843193] usb 1-2: SerialNumber: xx
[ 2084.843556] usb 1-2: configuration #1 chosen from 1 choice

teckk 12-23-2012 08:52 AM

Quote:

scan /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
scanning /usr/share/dvb/atsc/us-ATSC-center-frequencies-8VSB
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2284: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
Your device isn't working, you don't have the correct software installed for it, or you don't have it plugged in.

Google for what software you need for your USB tuner.
See how that loads in your flavor of linux. If there is support.
Check to see what kernel supports it. You make have to build it. There may be no support.

http://www.linuxtv.org/wiki/index.php/Hauppauge
http://ppa.launchpad.net/pitti/ppa/u.../v4l-dvb-dkms/
http://www.drivers-4u.com/w/wintv_hvr_h006_for.html

Good luck. Post back If you get it working so others can benefit.

teckk 12-23-2012 09:47 AM

Some more help for you. How to get info from a device. Different flavors of linux will have info in slightly different places. Use you own machine.
Code:

lsusb
....
Bus 001 Device 007: ID 2304:023b Pinnacle Systems, Inc. PCTV 801e SE
....

Code:

sudo lsusb -v -d 2304:023b
Bus 001 Device 007: ID 2304:023b Pinnacle Systems, Inc. PCTV 801e SE
Device Descriptor:
  bLength                18
  bDescriptorType        1
  bcdUSB              2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass        0
  bDeviceProtocol        0
  bMaxPacketSize0        64
  idVendor          0x2304 Pinnacle Systems, Inc.
  idProduct          0x023b PCTV 801e SE
  bcdDevice            1.00
  iManufacturer          1 YUANRD
  iProduct                2 PCTV 801e SE
  iSerial                3 1624552682
  bNumConfigurations      1
.......
.......

Code:

udevadm info -q all -p /sys/bus/usb/devices/1-10:1.0
P: /devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0
E: DEVPATH=/devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.0
E: DEVTYPE=usb_interface
E: DRIVER=dvb_usb_dib0700
E: ID_PRODUCT_FROM_DATABASE=PCTV 801e SE
E: ID_VENDOR_FROM_DATABASE=Pinnacle Systems, Inc.
E: INTERFACE=255/0/0
E: MODALIAS=usb:v2304p023Bd0100dc00dsc00dp00icFFisc00ip00in00
E: PRODUCT=2304/23b/100
E: SUBSYSTEM=usb
E: TYPE=0/0/0
E: USEC_INITIALIZED=76928749

Code:

sudo tail -n 40 /var/log/messages.log
Code:

sudo tail -n 40 /var/log/kernel.log
Take your info to google.


All times are GMT -5. The time now is 11:08 PM.