LQ Newbie
Registered: Jan 2005
Location: wisconsin, USA
Distribution: SuSE 9.x
Posts: 12
Rep:
|
Hard locks on suse
i am getting hard lock ups of the os periodicly where, without warning, everything freezes. I am unable to track down to source - hardware or software. Everything looks normal and works fine until it locks up.
running amd x64 3500+ and suse 9.2 pro 64. i have a MSI MS-7025 K8N Neo2 Platinum MoBo with nforce3 chipset video is gforce 5200. It has both sata and ata on the mobo, but i am running all ata. i have 3 250gb hds connected to the computer. 2 are connect to the primary controler, and controller 1 and a sii ide pci card with another 250 gb.
suse appeared to detect everything correctly, but i havent ruled out the os yet.
hda = WDC WD2500JB-00GVA0 250GB ata 100
hdb = WDC WD2500JB-00FUA0 250GB ata 100
hdc = DL DVD Burner
hde = Maxtor 6Y250P0 ata 133
this is lsmod output:
Module Size Used by
nvidia 5288160 8
usbserial 32240 0
parport_pc 41024 1
lp 12264 0
parport 45068 2 parport_pc,lp
edd 11344 0
freq_table 5000 0
thermal 20236 0
processor 29628 1 thermal
fan 6024 0
button 9760 0
battery 12680 0
ac 7176 0
snd_pcm_oss 63912 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_seq_midi 10816 0
snd_emu10k1_synth 9088 0
snd_emux_synth 42240 1 snd_emu10k1_synth
snd_seq_virmidi 8192 1 snd_emux_synth
snd_seq_midi_event 9088 2 snd_seq_midi,snd_seq_virmidi
snd_seq_midi_emul 9728 1 snd_emux_synth
snd_seq 60864 5 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_event,snd_seq_midi_emul
snd_ioctl32 18432 0
snd_emu10k1 95144 1 snd_emu10k1_synth
snd_rawmidi 27812 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_seq_device 10128 6 snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec 81952 1 snd_emu10k1
snd_pcm 110220 4 snd_pcm_oss,snd_ioctl32,snd_emu10k1,snd_ac97_codec
snd_timer 26632 2 snd_seq,snd_pcm
snd_page_alloc 11664 2 snd_emu10k1,snd_pcm
snd_util_mem 6016 2 snd_emux_synth,snd_emu10k1
snd_hwdep 10888 2 snd_emux_synth,snd_emu10k1
snd 67336 18 snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_virmidi,snd_seq_midi _event,snd_seq_midi_emul,snd_seq,snd_ioctl32,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,s nd_pcm,snd_timer,snd_util_mem,snd_hwdep
soundcore 10912 1 snd
ipv6 264096 17
af_packet 23692 2
subfs 8960 1
ext3 122768 1
jbd 68680 1 ext3
evdev 10752 0
joydev 11264 0
sg 40248 0
st 40612 0
sr_mod 18084 0
usbhid 43908 0
r8169 21256 0
e100 36352 0
mii 5888 1 e100
ohci1394 33796 0
ieee1394 117592 1 ohci1394
emu10k1_gp 4480 0
gameport 4992 1 emu10k1_gp
forcedeth 18816 0
ehci_hcd 30852 0
ohci_hcd 21380 0
dm_mod 58840 0
usbcore 122368 6 usbserial,usbhid,ehci_hcd,ohci_hcd
reiserfs 244848 6
sata_nv 9988 0
libata 46856 1 sata_nv
sd_mod 18072 0
scsi_mod 130432 5 sg,st,sr_mod,libata,sd_mod
and hdparm -i:
/dev/hda:
Model=WDC WD2500JB-00GVA0, FwRev=08.02D08, SerialNo=WD-WCAL72359954
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
/dev/hdb:
Model=WDC WD2500JB-00FUA0, FwRev=15.05R15, SerialNo=WD-WMAEP1418375
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version:
* signifies the current active mode
/dev/hde:
Model=Maxtor 6Y250P0, FwRev=YAR41BW0, SerialNo=Y6442V8E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=7936kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null):
* signifies the current active mode
Also running hdparm -t /dev/hdx give widly varing results. could this be a problem?
/dev/hda:
Timing buffered disk reads: 8 MB in 3.31 seconds = 2.42 MB/sec
earth:/home/gil # hdparm -t /dev/hdb
/dev/hdb:
Timing buffered disk reads: 68 MB in 3.01 seconds = 22.62 MB/sec
earth:/home/gil # hdparm -t /dev/hde
/dev/hde:
Timing buffered disk reads: 172 MB in 3.01 seconds = 57.06 MB/sec
any help is apreciated!
thx
g
Last edited by gman_O0O0; 02-24-2005 at 03:11 PM.
|