LinuxQuestions.org

LinuxQuestions.org (http://www.linuxquestions.org/questions/index.php)
-   Linux - Hardware (http://www.linuxquestions.org/questions/forumdisplay.php?f=18)
-   -   Getting GCT M-WiMAX Network Adaptor to work in LNX (http://www.linuxquestions.org/questions/showthread.php?t=4175455324)

Sansara 03-23-2013 11:28 PM

Getting GCT M-WiMAX Network Adaptor to work in LNX
 
The Kernel
Code:

3.5.0-17-generic
Using Linux Mint 14 Nadia(not upgraded).

Result of lsusb
Code:

Bus 002 Device 009: ID 1076:7f00 GCT Semiconductor, Inc.
Result of Dmesg
Code:

[ 1212.257527] usb 2-1.4: >Product: M-WiMAX Network Adaptor
[ 1212.257528] usb 2-1.4: >Manufacturer: GCT Semiconductor, Inc.
[ 1212.257530] usb 2-1.4: >SerialNumber: 72050203
[ 1212.258707] scsi8 : usb-storage 2-1.4:34.0
[ 1213.881777] scsi 8:0:0:0: >CD-ROM            GCT Semi CD-ROM          312e PQ: 0 ANSI: 0 CCS
[ 1213.885162] sr1: scsi3-mmc drive: 0x/0x caddy
[ 1213.885288] sr 8:0:0:0: >Attached scsi CD-ROM sr1
[ 1213.885361] sr 8:0:0:0: >Attached scsi generic sg3 type 5
[ 1214.013876] usb 2-1.4: >USB disconnect, device number 8
[ 1214.979251] usb 2-1.4: >new high-speed USB device number 9 using ehci_hcd
[ 1215.072208] usb 2-1.4: >New USB device found, idVendor=1076, idProduct=7f00
[ 1215.072213] usb 2-1.4: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1215.072215] usb 2-1.4: >Product: M-WiMAX Network Adaptor
[ 1215.072218] usb 2-1.4: >Manufacturer: GCT Semiconductor, Inc.
[ 1215.072220] usb 2-1.4: >SerialNumber: 72050203
[ 1215.110509] gdmwm: module is from the staging directory, the quality is unknown, you have been warned.
[ 1215.110879] Found GDM USB VID = 0x1076 PID = 0x7f00...
[ 1215.110880] GCT WiMax driver version 3.2.3
[ 1215.111057] GDM WiMax Set CAPABILITY: 0x0000000F
[ 1215.111074] usbcore: registered new interface driver gdm_wimax
[ 1215.113512] MAC change [00:0a:3b:f0:01:30]->[00:21:07:11:2c:d1]
[ 1215.120167] IPv6: ADDRCONF(NETDEV_UP): wm0: link is not ready
[ 1215.122504] IPv6: ADDRCONF(NETDEV_UP): wm0: link is not ready
[ 1215.129447] IPv6: ADDRCONF(NETDEV_UP): wm0: link is not ready
[ 1215.129538] IPv6: ADDRCONF(NETDEV_UP): wm0: link is not ready
[ 1218.074375] usb_modeswitch_[4362]: segfault at 0 ip 00007fbac9acf101 sp 00007fff70ddf268 error 4 in libc-2.15.so[7fbac9a46000+1b5000]

Result of usb_modeswitch -v 1076 -p 7f00 -d -G -W
Code:

GCT M-WiMax Network Adapter.
Bus 002 Device 007: ID 1076:7f00 GCT Semiconductor, Inc.
3.5.0-17-generic

---------
DefaultVendor=  0x1076
DefaultProduct= 0x7f00
TargetVendor=  not set
TargetProduct=  not set
TargetClass=    not set
TargetProductList=""

DetachStorageOnly=1
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=1
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint=  not set
MessageContent=""
NeedResponse=0
ResponseEndpoint= not set

InquireDevice enabled (default)
Success check disabled
System integration mode disabled


usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 007 on 002
usb_os_find_devices: Found 004 on 002
usb_os_find_devices: Found 003 on 002
skipped 1 class/vendor specific interface descriptors
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 002
usb_os_find_devices: Found 001 on 002
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
error obtaining child information: Inappropriate ioctl for device
usb_os_find_devices: Found 003 on 001
skipped 1 class/vendor specific interface descriptors
usb_os_find_devices: Found 002 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for default devices ...
  searching devices, found USB ID 1076:7f00
  found matching vendor ID
  found matching product ID
  adding device
  searching devices, found USB ID 14cd:6116
  searching devices, found USB ID 0461:0010
  searching devices, found USB ID 8087:0024
  searching devices, found USB ID 1d6b:0002
  searching devices, found USB ID 046d:c05a
  searching devices, found USB ID 8087:0024
  searching devices, found USB ID 1d6b:0002
 Found device in default mode, class or configuration (1)
Accessing device 007 on bus 002 ...
Getting the current device configuration ...
 OK, got current device configuration (17)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x82 (in)
Not a storage device, skipping SCSI inquiry

USB description data (for identification)
-------------------------
Manufacturer: GCT Semiconductor, Inc.
    Product: M-WiMAX Network Adaptor
  Serial No.: 72050203
-------------------------
Only detaching storage driver for switching ...
Looking for active driver ...
 OK, driver found ("gdm_wimax")
 OK, driver "gdm_wimax" detached
Looking for active driver ...
USB error: could not get bound driver: No data available
 No driver found. Either detached before or never attached
Sending GCT control message 1 ...
USB error: error sending control message: Broken pipe
Sending GCT control message 2 ...
USB error: error sending control message: Broken pipe
 OK, GCT control messages sent
-> Run lsusb to note any changes. Bye.

=======================================================

The Problems:

1) I don't know how to use usb_modeswitch manually, to make that usb to work.
2) The USB device is not working(?) as the way it supposed to.

And thanks for the help. :)

ukiuki 03-25-2013 06:31 AM

It appear to be working, looks like all you need is to set the connection with the router.
Quote:

Originally Posted by Sansara (Post 4917528)
...I don't know how to use usb_modeswitch manually...

http://www.draisberghof.de/usb_modeswitch/

Regards

Sansara 03-25-2013 08:22 AM

I have been to that page before(that's the first page that comes up when you google that), and didn't help me out much. I don't think I have the latest version, but I don't think that will change anything.


All times are GMT -5. The time now is 05:02 PM.