LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   frequent hanging (https://www.linuxquestions.org/questions/linux-hardware-18/frequent-hanging-594948/)

krishna_1980 10-27-2007 02:58 AM

frequent hanging
 
Hi,

I am using rhel5, and my system hangs frequently can anyone tell me
how to solve this problem and this is my sys config.

Code:

00:00.0 Host bridge: Intel Corporation 82810 GMCH [Graphics Memory Controller Hub] (rev 03)
        Subsystem: Intel Corporation 82810 GMCH [Graphics Memory Controller Hub]
        Flags: bus master, fast devsel, latency 0

00:01.0 VGA compatible controller: Intel Corporation 82810 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
        Subsystem: Intel Corporation Unknown device 0200
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
        Memory at e8000000 (32-bit, prefetchable) [size=64M]
        Memory at eff80000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: [dc] Power Management version 1

00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: efd00000-efdfffff
        Prefetchable memory behind bridge: e7b00000-e7bfffff

00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if 80 [Master])
        Subsystem: Intel Corporation 82801AA IDE
        Flags: bus master, medium devsel, latency 0
        I/O ports at ffa0 [size=16]

00:1f.2 USB Controller: Intel Corporation 82801AA USB (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation 82801AA USB
        Flags: bus master, medium devsel, latency 0, IRQ 10
        I/O ports at de00 [size=32]

01:0b.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
        Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at cc00 [size=256]
        Capabilities: [c0] Power Management version 2

01:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd. RT8139
        Flags: bus master, medium devsel, latency 64, IRQ 12
        I/O ports at c800 [size=256]
        Memory at efdfff00 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at e7b00000 [disabled] [size=64K]
        Capabilities: [50] Power Management version 2

regards

camh 10-28-2007 05:12 AM

Try providing more detail about your issue. You only provide details about your hardware configuration, not your situation (e.g. hangs at boot, ..in X, ..randomly, etc.) -- which at this point at least, doesn't help. No one can help you when you simply say "My computer hangs, what's wrong?"

krishna_1980 10-30-2007 03:52 AM

Hi

Thank you for ur suggestion. Actually i am using rhel5 eval. version.
I want to buy rhel5 so i am checking it.

Quote:


Try providing more detail about your issue. You only provide details about your hardware configuration, not your situation (e.g. hangs at boot, ..in X, ..randomly, etc.) -- which at this point at least, doesn't help. No one can help you when you simply say "My computer hangs, what's wrong?"

There is no problem at boot time. Actually it hangs randomly after loged into gui interface.
I dont know whats problem, is it related to hardware or software.
How to check what caused the problem like any commands are there. Any suggestion to rectify this problem step by step is appreciated.

regards


All times are GMT -5. The time now is 06:12 AM.