external monitor/data projector switching
Hello,
I am using an emachines M5116 laptop (widexcreen 1280x800), with Suse 9.3 (KDE) and and Intel855 GM video card. The only thing I have to use Windows XP for is making presentations using a data projector. I would like to be able to do this in Linux. I have installed and tried the following - i810switch - the data projector display flickers badly and only shows part of the full screen i855crt - using the command i855crt on rawpipe I get an almost full screen (without the panel at the bottom) and although there is no flickering, the screen is speckling as though the screen is made up of ants frantically crawling on the spot (I don't know how else to describe it I'm afraid). Can anyone suggest ways of resolving this? The relevant bits of my Xorg config file are - Section "Monitor" Option "CalcAlgorithm" "CheckDesktopGeometry" DisplaySize 332 207 HorizSync 30-82 Identifier "Monitor[0]" ModelName "1280X800@75HZ" Option "DPMS" VendorName "--> LCD" VertRefresh 58-75 UseModes "Modes[0]" EndSection Section "Monitor" Option "CalcAlgorithm" "CheckDesktopGeometry" DisplaySize 320 240 HorizSync 31.5-80 Identifier "Monitor[1]" ModelName "1024X768@85HZ" Option "DPMS" VendorName "--> LCD" VertRefresh 60-90 UseModes "Modes[1]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x800" 88.68 1280 1352 1488 1696 800 801 804 830 Modeline "1280x800" 104.35 1280 1360 1496 1712 800 801 804 835 EndSection #Following modelines got from different online modeline calculators Section "Modes" Identifier "Modes[1]" Modeline "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +vsync +hsync Modeline "1024x768" 97.4 1024 1072 1192 1416 768 768 771 809 Modeline "1024x768" 100.94 1024 1056 1432 1464 768 782 793 807 EndSection Section "Screen" DefaultDepth 16 SubSection "Display" Depth 15 Modes "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" EndSubSection SubSection "Display" Depth 32 Modes "1280x800" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Screen" DefaultDepth 16 SubSection "Display" Depth 15 Modes "1280x800" "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" "1024x768" EndSubSection SubSection "Display" Depth 32 Modes "1280x800" "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" "1024x768" EndSubSection Device "Device[0]" Identifier "Screen[1]" Monitor "Monitor[1]" Option "ActiveDevice" "CRT,LCD" EndSection Section "Device" BoardName "855 GM" BusID "0:2:0" Driver "i810" Identifier "Device[0]" Option "NoDDC" Screen 0 VendorName "Intel" EndSection Any help gratefully appreciated, Donald |
All times are GMT -5. The time now is 03:57 AM. |