LinuxQuestions.org
Review your favorite Linux distribution.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 06-22-2007, 03:05 AM   #1
xunil321
Member
 
Registered: Mar 2004
Posts: 33

Rep: Reputation: 15
ERROR: Doorbell on SunUltra 20 under SLES8


Hallo,

may I have some ideas concerning the ERROR messages during the
boot process of our SunUltra 20 under SLES8 SP3 with an attached Hitachi
SATA drive:
...
...
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1245k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
libata version 0.71 loaded.
sata_nv version 0.05
PCI: Setting latency timer of device 00:07.0 to 64
PCI: Setting latency timer of device 00:08.0 to 64
ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD400 irq 21
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD408 irq 21
ata1: dev 0 cfg 49:2f00 82:346b 83:7fe9 84:4773 85:3469 86:3c01
87:4763 88:407f
ata1: dev 0 ATA, max UDMA/133, 488390625 sectors (lba48)
ata1: dev 0 configured for UDMA/133
ATA: abnormal status 0x7F on port 0x977
ata2: thread exiting
ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC000 irq 20
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC008 irq 20
ATA: abnormal status 0x7F on port 0x9E7
ata3: thread exiting
ATA: abnormal status 0x7F on port 0x967
ata4: thread exiting
scsi0 : sata_nv
scsi1 : sata_nv
scsi2 : sata_nv
scsi3 : sata_nv
Vendor: ATA Model: HITACHI HDS7225S Rev: 0.71
Type: Direct-Access ANSI SCSI revision: 05
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 488390625 512-byte hdwr sectors (250056 MB)
Partition check:
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
Fusion MPT base driver 2.05.05+
Copyright (c) 1999-2002 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
mptbase: ioc0: ERROR - Doorbell ACK timeout(4)!
mptbase: ioc0: ERROR - Doorbell ACK timeout(4)!

ioc0: 53C1030: Capabilities={Initiator}
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator}
mptbase: 2 MPT adapters found, 2 installed.
Fusion MPT SCSI Host driver 2.05.05+
scsi4 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=222, IRQ=19
scsi5 : ioc1: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=222, IRQ=16
blk: queue f01e7418, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
hda: attached ide-cdrom driver.
hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
...
...
Nevertheless the system is running without any problems but it would be
nice to know the meaning of these errors.

THX, Rainer B.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
SLES8 mhash.h missing?? matthiar SUSE / openSUSE 2 08-30-2005 08:35 AM
How to install Suse SLES8 as 64bit OS srikz SUSE / openSUSE 0 02-14-2005 10:48 PM
shutdown hangs in SLES8, 9 Yozzi Linux - Newbie 0 10-27-2004 11:50 AM
Oh Dear ... LDAP/SLES8???? phonecian Linux - Networking 0 09-23-2004 12:20 AM
SLES8 & apt-get phonecian Linux - Enterprise 1 08-03-2004 07:34 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 12:12 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration