LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 09-05-2004, 04:32 AM   #1
linuxRunner
Member
 
Registered: May 2003
Posts: 32

Rep: Reputation: 15
Epson Stylus CX3200 No longer works


I have an Epson Stylus CX3200 printer. I had it working and printing just fine but now today I cannot get it to print anything. I have tried removing it and re-adding it with no luck. The last thing I can remember doing is "export LD_ASSUME_KERNEL=2.4.1". I had to do this to fix some binary issues related to work. However, I later found out that I do not need this. I had already performed the command so I am wondering if that is what messed things up. How do I "undo" this? When I type "echo $LD_ASSUME_KERNEL" I get nothing. It is blank. So I do not know if it really needs to be undone or not. Here are my other specs and some additional information:

Distro = SUSE 9.0
Kernel = 2.4.21-144-default

Output of dmesg:
Linux version 2.4.21-144-default (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Fri Nov 14 00:01:36 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff7a000 (ACPI data)
BIOS-e820: 000000001ff7a000 - 000000001ff7c000 (ACPI NVS)
BIOS-e820: 000000001ff7c000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
502MB vmalloc/ioremap area available.
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 130928
zone(0): 4096 pages.
zone(1): 126832 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
ACPI: RSDP (v002 IBM ) @ 0x000f7120
ACPI: XSDT (v001 IBM TP-1M 00000.08240) @ 0x1ff733f8
ACPI: FADT (v001 IBM TP-1M 00000.08240) @ 0x1ff73444
ACPI: SSDT (v001 IBM TP-1M 00000.08240) @ 0x1ff734f8
ACPI: ECDT (v001 IBM TP-1M 00000.08240) @ 0x1ff79f55
ACPI: TCPA (v001 IBM TP-1M 00000.08240) @ 0x1ff79fa6
ACPI: BOOT (v001 IBM TP-1M 00000.08240) @ 0x1ff79fd8
ACPI: DSDT (v001 IBM TP-1M 00000.08240) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/hda2 vga=0x314 desktop splash=silent
bootsplash: silent mode.
Initializing CPU#0
Detected 1199.841 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2359.29 BogoMIPS
Memory: 513952k/523712k available (1579k kernel code, 9372k reserved, 605k data, 160k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebf9ff 00000000 00000000 00000000
CPU: Common caps: bfebf9ff 00000000 00000000 00000000
CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xfd91e, last bus=5
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Found ECDT
ACPI: Could not use ECDT
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM/DBM PCI Bridge
PCI: Using IRQ router PIIX [8086/248c] at 00:1f.0
PCI: Found IRQ 11 for device 00:1f.1
PCI: Sharing IRQ 11 with 00:1d.2
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 32732
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xe8000000, mapped to 0xe0813000, size 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:530f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.0.9-2003/09/08: looking for picture.... silenjpeg size 16664 bytes, found (800x600, 8118 bytes, v3).
bootsplash: silent jpeg found.
bootsplash: silent jpeg found.
Console: switching to colour frame buffer device 92x29
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
PCI: Found IRQ 11 for device 00:1f.6
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 02:09.0
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
PCI: Found IRQ 11 for device 00:1f.1
PCI: Sharing IRQ 11 with 00:1d.2
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdcMA, hddio
hda: IC25N020ATMR04-0, ATA DISK drive
blk: queue c03bc8e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39070080 sectors (20004 MB) w/1740KiB Cache, CHS=2432/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 268k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,2)) ...
for (ide0(3,2))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 160k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
lvm-mp: allocating 42 lowmem entries at c1ccf000
LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded
reiserfs: enabling write barrier flush mode
Adding Swap: 1028120k swap-space (priority 42)
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
bootsplash: silent jpeg found.
Intel(R) PRO/100 Network Driver - version 2.3.27
Copyright (c) 2003 Intel Corporation

PCI: Found IRQ 11 for device 02:08.0
PCI: Sharing IRQ 11 with 02:07.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled

raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 00:40:37 Nov 14 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:1d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.1
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1d.2
PCI: Sharing IRQ 11 with 00:1f.1
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:1d.1-1, assigned address 2
uhci.c: USB Universal Host Controller Interface driver v1.1
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: new USB device 00:1d.1-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x2525/0x1925) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
hub.c: Cannot enable port 1 of hub 2, disabling port.
hub.c: Maybe the USB cable is bad?
usb-uhci.c: ENXIO 80000200, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: cannot disable port 1 of hub 2 (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: get_hub_status failed
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: usb_hub_port_status (2) failed (err = -6)
usb-uhci.c: ENXIO 80000280, flags 0, urb c2ae96a0, burb c2ae9720
hub.c: get_hub_status failed
hub.c: new USB device 00:1d.1-1.3, assigned address 4
usb.c: USB device 4 (vend/prod 0x6b9/0x4061) is not claimed by any active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
usb-uhci.c: interrupt, status 2, frame# 1528
input: USB HID v1.10 Mouse [Fellowes, Inc. Mini Web Pro Optical] on usb2:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 02:09.0
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.6
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000010
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa28c0, burb c2aa29c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa29c0, burb c2aa28c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 147 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa28c0, burb c2aa29c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 147 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa28c0, burb c2aa29c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa29c0, burb c2aa28c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa28c0, burb c2aa2ac0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 147 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa29c0, burb c2aa28c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2ac0, burb c2aa29c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa29c0, burb c2aa28c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2a40, burb c2aa28c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa29c0, burb c2aa28c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa28c0, burb c2aa2ac0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 147 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2ac0, burb c2aa29c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2ac0, burb c2aa29c0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa29c0, burb c2aa2ac0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 9 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2b40, burb c2aa2ac0
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2b40, burb c2aa2ac0
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2b40, burb c2aa2ac0
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2ac0, burb c2aa2bc0
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 147 ret -6
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2b40, burb c2aa2bc0
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2b40, burb c2aa2bc0
usb-uhci.c: ENXIO 80000480, flags 0, urb c2aa2b40, burb c2aa2bc0
ttyS00 at port 0x03f8 (irq = 3) is a 16550A
/dev/vmmon: VMMON CPUID: Unrecognized CPU
/dev/vmmon: Module vmmon: registered with major=10 minor=165
/dev/vmmon: Module vmmon: initialized
parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
/dev/vmnet: open called by PID 1650 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
bridge-eth0: attached
PCI: Found IRQ 11 for device 00:1f.5
PCI: Sharing IRQ 11 with 00:1f.3
PCI: Sharing IRQ 11 with 00:1f.6
PCI: Sharing IRQ 11 with 02:09.0
PCI: Setting latency timer of device 00:1f.5 to 64
intel8x0: clocking to 48000
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
bootsplash: silent jpeg found.
lp0: using parport0 (polling).
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
eth0: no IPv6 routers present
Linux video capture interface: v1.00
ide-floppy driver 0.99.newide
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_BULK failed dev 4 ep 0x85 len 512 ret -110
HDLC line discipline: version $Revision: 3.3 $, maxframe=4096
N_HDLC line discipline registered.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP MPPE compression module registered
spurious 8259A interrupt: IRQ7.

Output of /sbin/lsusb:
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 05e3:0604 Genesys Logic, Inc.
Bus 002 Device 004: ID 06b9:4061 Alcatel Telecom Speed Touch ISDN
Bus 002 Device 003: ID 2525:1925
Bus 001 Device 001: ID 0000:0000

It looks like it is not even detecting it?

The printer is connected via a 4 port USB hub. When I initially installed the printer, I had to connect the printer directly to the computer. After it was set up, I was able to connect it via the hub. Now, however, I cannot get it work whether it is connected directly to the computer or through the hub.

Thanks for any help.
 
Old 09-08-2004, 01:14 AM   #2
linuxRunner
Member
 
Registered: May 2003
Posts: 32

Original Poster
Rep: Reputation: 15
Anyone?

Does anybody have any suggestions? Please.

Thanks.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems with Epson Stylus CX3200 on Suse 9.0 linuxRunner Linux - Hardware 0 08-22-2004 05:04 AM
Epson sylus cx3200 DaveyB Slackware 4 08-16-2004 10:16 AM
Epson Stylus Cx3200 DaveyB Linux - Newbie 4 08-16-2004 04:59 AM
Epson Stylus CX3200 Help???? Scanner Error message shown? Becks7 Linux - Hardware 0 12-26-2003 06:51 PM
Epson CX3200 All In One christer Linux - Newbie 15 12-01-2003 03:52 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 09:55 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration