eepro100, irq, gnome, Mandrake 9.2 weirdness

Jiawen · 02-06-2005, 06:52 PM

I'm trying to get my dad's Toshiba Tecra 8200 laptop working with Gnome 2.4 and Mandrake 9.2. I'm having trouble getting Gnome to work with the internet connections, apparently.

I've gotten KDE working fine (I'm typing this on the notebook through KDE and Firefox), but when I try to load Gnome, it comes up with a bunch of nonsense windows that have no text in them. I have to ctl+alt+backspace to get back into KDE.

It seems to be a problem with the lan connection. I followed this howto and added the

Code:

alias eth0 e100

, then ran the DrakConnect to get the internet connection working. However, that was when Gnome started acting weird.

When I boot up, there are some messages about IRQ that go by too quickly to record, a message that says

Code:

insmod'ing module eepro100 failed at /usr/lib/libdrakx/modules.pm line 61

and also mention that I should check dmesg. When I do, I get this:

Code:

Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
 BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
 BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000ff60000 (usable)
 BIOS-e820: 000000000ff60000 - 000000000ff70000 (ACPI data)
 BIOS-e820: 000000000ff70000 - 0000000010000000 (reserved)
 BIOS-e820: 00000000feea0000 - 00000000feec0000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 65376
zone(0): 4096 pages.
zone(1): 61280 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 TOSHIB                                    ) @ 0x000f0270
ACPI: RSDT (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @ 0x0ff60000
ACPI: FADT (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @ 0x0ff60054
ACPI: DSDT (v001 TOSHIB 8200     0x20020325 MSFT 0x0100000a) @ 0x00000000
ACPI: MADT not present
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux ro root=305 devfs=mount hdc=ide-scsi acpi=ht resume=/dev/hda6 splash=silent
ide_setup: hdc=ide-scsi
bootsplash: silent mode.
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 747.752 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1490.94 BogoMIPS
Memory: 254756k/261504k available (1508k kernel code, 6360k reserved, -1961k data, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU:             Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfda4b, last bus=14
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
PCI: Using IRQ router PIIX [8086/244c] at 00:1f.0
PCI: Found IRQ 11 for device 02:0c.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 with 02:0d.0
PCI: Found IRQ 11 for device 02:0d.1
PCI: Sharing IRQ 11 with 00:1f.2
PCI: Sharing IRQ 11 with 02:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xfc000000, mapped to 0xd0800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:7722
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 107888 bytes, found (800x600, 107840 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 11 for device 00:1f.6
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2M: IDE controller at PCI slot 00:1f.1
ICH2M: chipset revision 3
ICH2M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xcff0-0xcff7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcff8-0xcfff, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK2016GAP, ATA DISK drive
blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff)
hdc: UJDA330, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39070080 sectors (20004 MB), CHS=2432/255/63, UDMA(66)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Resume Machine:   This is normal swap space
Swsusp 1.0.3: kswsuspd starting
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 299k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 12:42:04 Sep 18 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Assigned IRQ 11 for device 00:1f.2
PCI: Sharing IRQ 11 with 02:07.0
PCI: Sharing IRQ 11 with 02:0d.1
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0xcf80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
usb-uhci.c: USB UHCI at I/O 0xcf60, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
hub.c: new USB device 00:1f.2-2, assigned address 2
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
usb.c: USB device 2 (vend/prod 0x46d/0xc501) is not claimed by any active driver.
Adding Swap: 642560k swap-space (priority -1)
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MATSHITA  Model: UJDA330           Rev: 1.01
  Type:   CD-ROM                             ANSI SCSI revision: 02
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
Intel(R) PRO/100 Network Driver - version 2.3.18-k1
Copyright (c) 2003 Intel Corporation

PCI: Found IRQ 11 for device 02:08.0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
  Hardware receive checksums enabled

inserting floppy driver for 2.4.22-10mdk
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
ip_conntrack version 2.1 (2043 buckets, 16344 max) - 320 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Linux Kernel Card Services Kernel Version
  options:  [pci] [cardbus] [pm]
PCI: Enabling device 02:0c.0 (0000 -> 0002)
PCI: Found IRQ 11 for device 02:0c.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 with 02:0d.0
PCI: Found IRQ 11 for device 02:0d.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Sharing IRQ 11 with 02:0c.0
PCI: Found IRQ 11 for device 02:0d.1
PCI: Sharing IRQ 11 with 00:1f.2
PCI: Sharing IRQ 11 with 02:07.0
Yenta IRQ list 0000, PCI irq11
Socket status: 30000011
ti113x: Routing card interrupts to PCI
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000007
Yenta IRQ list 04b8, PCI irq11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others)
orinoco_lock() called with hw_unavailable (dev=cc274800)
eth1: Station identity 001f:0001:0006:000e
eth1: Looks like a Lucent/Agere firmware version 6.14
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:02:2D:14:A8:61
eth1: Station name "HERMES I"
eth1: ready
eth1: index 0x01: Vcc 3.3, irq 11, io 0x0100-0x013f
PCI: Found IRQ 11 for device 02:07.0
PCI: Sharing IRQ 11 with 00:1f.2
PCI: Sharing IRQ 11 with 02:0d.1
IN= OUT=eth0 SRC=10.0.0.2 DST=224.0.0.22 LEN=40 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
IN= OUT=eth0 SRC=10.0.0.2 DST=224.0.0.251 LEN=80 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=60
IN= OUT=eth0 SRC=10.0.0.2 DST=224.0.0.251 LEN=80 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=60
IN= OUT=eth0 SRC=10.0.0.2 DST=224.0.0.251 LEN=80 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=60
IN= OUT=eth0 SRC=10.0.0.2 DST=224.0.0.251 LEN=65 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=45
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 0 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 1 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 2 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 3 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 5 changed to on

I don't know what all that means. Please help! Thanks!