LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Dual Screen with Radeon 7000 and Matrox Millenium (https://www.linuxquestions.org/questions/linux-hardware-18/dual-screen-with-radeon-7000-and-matrox-millenium-232484/)

lumstar 09-19-2004 09:36 AM

Dual Screen with Radeon 7000 and Matrox Millenium
 
I have a radeon 7000 in my AGP slot and a Matrox Millenium in the top PCI slot. I am running Fedore Core 2. For a working install, I had to remove the Matrox from the pci slot during the install process. After the install was complete I put the Matrox back in the top PCI and rebooted. When I go to display settings the video card is listed as the Matrox Millenium however the monitor with the output is connected to the Radeon. When I go to the dual head section, I have the option of turning the radeon 7000 on as secondary, but when I do there is no change.

How do i go about changing the video card priority and how do I get dual head working? Any suggestions would be really helpful.

If I have been unclear in any part of the explanation please let me know so that I can clarify.


Thanks in advance,



Stephen

lumstar 09-19-2004 10:20 AM

Oh, and by the way, here is the output for /sbin/lspci:

00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801DB (ICH4) USB UHCI #3 (rev 01)
00:1d.7 USB Controller: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller (rev 01)00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corp. 82801DB (ICH4) LPC Bridge (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801DB (ICH4) Ultra ATA 100 Storage Controller (rev 01)
00:1f.3 SMBus: Intel Corp. 82801DB/DBM (ICH4) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB (ICH4) AC'97 Audio Controller (rev 01)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
02:02.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II]
02:0c.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
02:0d.0 Network controller: Broadcom Corporation BCM94306 802.11g (rev 03)

anon085 09-21-2004 04:56 PM

Dualhead
 
About the dualhead problem this page may help:
http://www.rage3d.com/content/articles/atilinuxhowto/

I haven't tried it yet so I cannot asure anything.

If you find a way to make your S-video opt work on a tv let me know!


All times are GMT -5. The time now is 05:02 AM.