LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 05-24-2006, 11:37 AM   #1
Shamie
LQ Newbie
 
Registered: Nov 2005
Posts: 15

Rep: Reputation: 0
Dual Screen - 2 DVI on same graphics card


Hi,

I've been at this all day trying different combinations with no look. Just can't get the second monitor get a display.

It's Red Hat Enterprise 4 64bit with a 3dlabs Wildcat Realizm 800 that has 2 DVI ports connected to the 19" IBM LCD screens.

The proper 3Dlabs drivers are installed and working with one display.

Any help would be great thanks.
Here's the xorg.conf:

# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "multihead configuration"
Screen "Screen0"
Screen "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
EndSection

Section "Files"

# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "GLcore"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x1024"
Option "dpms"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x1024"
Option "dpms"
EndSection


Section "Device"
Identifier "Videocard0"
Driver "wildcat"
VendorName "3Dlabs"
BoardName "Wildcat Realizm"
BusID "PCI:84:00:0"
EndSection

Section "Device"
Identifier "Videocard1"
Driver "wildcat"
VendorName "3Dlabs"
BoardName "Wildcat Realizm"
BusID "PCI:132:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection


Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection



Section "DRI"
Group 0
Mode 0666
EndSection




And here's the xorg log:


X Window System Version 6.8.1
Release Date: 17 September 2004
X Protocol Version 11, Revision 0, Release 6.8.1
Build Operating System: Linux 2.4.21-14.ELsmp x86_64 [ELF]
Current Operating System: Linux localhost.localdomain 2.6.9-5.EL #1 Wed Jan 5 19:21:57 EST 2005 x86_64
Build Date: 09 December 2004
Build Host: dolly.build.redhat.com

Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.9-5.EL (bhcompile@thor.perf.redhat.com) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 Wed Jan 5 19:21:57 EST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed May 24 16:59:15 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "multihead configuration"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Videocard1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib64/modules"
(**) Option "Xinerama" "off"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib64/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib64/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:06:0: chip 1022,7460 card 1014,02b7 rev 07 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1022,7468 card 1014,02b7 rev 05 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1022,7469 card 1014,02b7 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1022,746a card 1014,02b7 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:07:3: chip 1022,746b card 1014,02b7 rev 05 class 06,80,00 hdr 00
(II) PCI: 00:07:5: chip 1022,746d card 1014,02b7 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:0a:0: chip 1022,7450 card 0000,0000 rev 12 class 06,04,00 hdr 81
(II) PCI: 00:0a:1: chip 1022,7451 card 1022,7451 rev 01 class 08,00,10 hdr 00
(II) PCI: 00:0b:0: chip 1022,7450 card 0000,0000 rev 12 class 06,04,00 hdr 81
(II) PCI: 00:0b:1: chip 1022,7451 card 1022,7451 rev 01 class 08,00,10 hdr 00
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:02:0: chip 1095,3512 card 1014,3512 rev 01 class 01,80,00 hdr 00
(II) PCI: 01:03:0: chip 1033,0035 card 1014,02b7 rev 43 class 0c,03,10 hdr 80
(II) PCI: 01:03:1: chip 1033,0035 card 1014,02b7 rev 43 class 0c,03,10 hdr 00
(II) PCI: 01:03:2: chip 1033,00e0 card 1014,02b7 rev 04 class 0c,03,20 hdr 00
(II) PCI: 01:04:0: chip 104c,8023 card 1014,02b7 rev 00 class 0c,00,10 hdr 00
(II) PCI: 03:02:0: chip 14e4,16a7 card 1014,026f rev 02 class 02,00,00 hdr 00
(II) PCI: 80:00:0: chip 10de,005e card 1014,02b7 rev a3 class 05,80,00 hdr 00
(II) PCI: 80:01:0: chip 10de,00d3 card 1014,02b7 rev a3 class 05,80,00 hdr 80
(II) PCI: 80:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 80:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 81:00:0: chip 1033,0125 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 81:00:1: chip 1033,0125 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 83:04:0: chip 9005,801d card 1014,02b7 rev 10 class 01,00,00 hdr 80
(II) PCI: 83:04:1: chip 9005,801d card 1014,02b7 rev 10 class 01,00,00 hdr 80
(II) PCI: 84:00:0: chip 3d3d,0030 card 3d3d,1050 rev 03 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:6:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xb0100000 - 0xb01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xfff00000 - 0xffffffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:10:0), (0,2,2), BCTRL: 0x0007 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:11:0), (0,3,3), BCTRL: 0x0007 (VGA_EN is cleared)
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xb0200000 - 0xb02fffff (0x100000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,132), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 128: bridge is at (0:24:1), (-1,128,132), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 128 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 128 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 128 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:2), (-1,-1,132), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:24:3), (-1,-1,132), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:25:0), (-1,-1,132), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:25:1), (-1,-1,132), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:25:2), (-1,-1,132), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000fff
 
Old 05-24-2006, 11:40 AM   #2
Shamie
LQ Newbie
 
Registered: Nov 2005
Posts: 15

Original Poster
Rep: Reputation: 0
Sorry, don't have enough time to copy and paste... here's a link to the full xorg.log

www.shanemolloy.com/xorglog.txt



Thanks for any help.
 
Old 05-25-2006, 03:42 AM   #3
Shamie
LQ Newbie
 
Registered: Nov 2005
Posts: 15

Original Poster
Rep: Reputation: 0
Anyone even with a 3dlabs card got a dual screen setup in Linux?

This is destroying my mind!
 
Old 05-28-2006, 11:29 PM   #4
sleepindawg
Member
 
Registered: Aug 2003
Location: Kansas... USA
Distribution: Mandrake10 Offical, Debian Sarge, Knoppix, GO Ubuntu!!! my new home
Posts: 79

Rep: Reputation: 15
have you tried changing this " Option "Xinerama" "off"" to this "Option "Xinerama" "on"" ???
 
Old 05-29-2006, 02:22 PM   #5
foolsh
Member
 
Registered: Apr 2005
Location: IL
Distribution: kubuntu
Posts: 56

Rep: Reputation: 15
i use multi display systems all the time, but i have never used a 3dlabs card though.
from what i see the xorg file looks fine. perhaps its something else, what is the output of lspci, make sure the bus id's are correct. xinerama probably wont stop the sencond card from working, it just stretches the desktop out to both display or not.
you could try putting one or both cards in framebuffer mode. and see if that helps,
replace the driver setting with "vesa" instead of "wildcat". this helps me when im using less than cooperative video cards. look at the man page for the wildcat driver, there maybe options that control how the video card behaves in dual mode.
 
Old 05-29-2006, 07:12 PM   #6
AwesomeMachine
LQ Guru
 
Registered: Jan 2005
Location: USA and Italy
Distribution: Debian testing/sid; OpenSuSE; Fedora; Mint
Posts: 5,524

Rep: Reputation: 1015Reputation: 1015Reputation: 1015Reputation: 1015Reputation: 1015Reputation: 1015Reputation: 1015Reputation: 1015
It looks like the 3dlabs driver isn't properly installed and you are running the xorg driver instead of the 3dlabs driver. After you install the driver you have to run the x window system configuration and select that driver to use with Red Hat.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting up Dual Monitors on GeForce 6600GT dual DVI card. monkiidansu Linux - Hardware 1 09-29-2005 02:21 PM
Xinerama with Nvidia 6600GT (dual DVI card) tktucker Linux - Hardware 1 07-13-2005 01:12 AM
best video card for a dual dvi lcd setup? dirtybird04 Linux - Hardware 0 07-06-2005 07:28 AM
DVI-D DVI-I DVI-A Dual Link Single Link WTF? Crito Linux - Hardware 0 06-05-2004 01:41 AM
Boot Screen Graphics Card Setting dsbrand Linux - Distributions 1 09-14-2003 09:00 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 01:51 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration