Driver for HP LaserJet 2300L ?
 

I have HP LaserJet 2300L printer. HP officially supports this series of printer. The HP documentation says that Red Hat 6.1 or higher is supported. I want to use this printer with Red Hat 8.

When I add the printer and want to chose the driver. The Red Hat 8.0 doesn't have a driver for the model. What driver should I choose?


Thank you.

I don't know if you have checked here, but this is where i get all of my printer drivers.

http://www.linuxprinting.org/show_pr...-LaserJet_2300

That link is for you.

:-)

Thanks for the link. But what driver I should use for this printer?

This printer has 2 trays and I want to print one job to tray #1 and second job to tray number 2. How that can be done?

Thanks for help

I would just configure the printer through "cups" the printer should respond automatically. If it asks for a driver while configuring, then grab "http://www.linuxprinting.org/ppd-o-matic.cgi?driver=Postscript&printer=HP-LaserJet_2300&show=0
But it should connect and work automatically. Then you can go through cups-->printer config to configure the paper trays.

Might work.

What command I should use to print through CUPS?

do "printconf-gui"

Go through the motions and pick the exact driver or set the printer to use "postscript". If simple stuff like that doesn't work....do a Goggle search. This stuff has pretty much been documented like a million times over on the net and probably in these forums. :-))

Thanks for your help guys.

Printer works now.