LinuxQuestions.org

Thanks for the reply. Yes, but with errors. How do we know if we dump the filesystem correctly. The command I use is "dump 0Bbuf 120000 64 /dev/tape /home".
Is there a way to check if your file is being copy to tape (DLT)?

dvong

tion v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 16
Processor #0 Pentium(tm) Pro APIC version 16
I/O APIC #8 Version 17 at 0xFEC00000.
Processors: 2
xAPIC support is not present
Enabling APIC mode: Flat. Using 1 I/O APICs
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 996.894 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 1152936k/1179632k available (1683k kernel code, 22088k reserved, 1318k data, 224k init, 262128k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.68 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1992.29 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 06
Total of 2 processors activated (3978.03 BogoMIPS).
apic 0 pin 0 is an SMI pin!
apic 0 pin 1 is an SMI pin!
apic 0 pin 4 is an SMI pin!
apic 0 pin 15 is an SMI pin!
apic 0 pin 19 is an SMI pin!
apic 0 pin 21 is an SMI pin!
apic 0 pin 34 is an SMI pin!
ENABLING IO-APIC IRQs
Setting 8 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 8 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 8-24, 8-25, 8-26, 8-27, 8-28, 8-29, 8-30, 8-31, 8-32, 8-33, 8-34 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found pin 0) ...works.
number of MP IRQ sources: 16.
number of IO-APIC #8 registers: 35.
testing the IO APIC.......................

IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00220011
....... : max redirection entries: 0022
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 003 03 0 0 0 0 0 1 1 31
01 003 03 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 003 03 0 0 0 0 0 1 1 41
04 003 03 0 0 0 0 0 1 1 49
05 003 03 1 1 0 1 0 1 1 51
06 003 03 0 0 0 0 0 1 1 59
07 003 03 1 1 0 1 0 1 1 61
08 003 03 0 0 0 0 0 1 1 69
09 003 03 0 0 0 0 0 1 1 71
0a 003 03 1 1 0 1 0 1 1 79
0b 003 03 1 1 0 1 0 1 1 81
0c 003 03 0 0 0 0 0 1 1 89
0d 003 03 1 1 0 1 0 1 1 91
0e 003 03 0 0 0 0 0 1 1 99
0f 003 03 1 1 0 1 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 06A 0A 1 0 0 0 0 1 2 0A
14 000 00 1 0 0 0 0 0 0 00
15 0EC 0C 1 0 0 0 0 0 2 6B
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
18 000 00 1 0 0 0 0 0 0 00
19 000 00 1 0 0 0 0 0 0 00
1a 000 00 1 0 0 0 0 0 0 00
1b 000 00 1 0 0 0 0 0 0 00
1c 000 00 1 0 0 0 0 0 0 00
1d 000 00 1 0 0 0 0 0 0 00
1e 000 00 1 0 0 0 0 0 0 00
1f 000 00 1 0 0 0 0 0 0 00
20 000 00 1 0 0 0 0 0 0 00
21 000 00 1 0 0 0 0 0 0 00
22 038 08 1 0 0 0 0 1 2 3E
IRQ to pin mappings:
IRQ0 -> 0:0
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 996.8780 MHz.
..... host bus clock speed is 132.9169 MHz.
cpu: 0, clocks: 1329169, slice: 443056
CPU0<T0:1329168,T1:886112,D:0,S:443056,C:1329169>
cpu: 1, clocks: 1329169, slice: 443056
CPU1<T0:1329168,T1:443056,D:0,S:443056,C:1329169>
zapping low mappings.
Process timing init...done.
Starting migration thread for cpu 0
Starting migration thread for cpu 1
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0084, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered peer bus 03
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:78 not found by BIOS
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Total HugeTLB memory allocated, 0
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 73727
aio_setup: sizeof(struct page) = 60
Hugetlbfs mounted.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:pio, hdd:pio
hda: Compaq CRD-8402B, ATAPI CD/DVD-ROM drive
hda: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hda: set_drive_speed_status: error=0xb4
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 288k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
sym53c8xx: at PCI bus 0, device 1, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c1510D detected
sym53c8xx: at PCI bus 0, device 1, function 1
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c1510D detected
sym53c1510D-0: rev 0x2 on pci bus 0 device 1 function 0 irq 10
sym53c1510D-0: ID 7, Fast-40, Parity Checking
sym53c1510D-1: rev 0x2 on pci bus 0 device 1 function 1 irq 11
sym53c1510D-1: ID 7, Fast-40, Parity Checking
scsi0 : sym53c8xx-1.7.3c-20010512
scsi1 : sym53c8xx-1.7.3c-20010512
Starting timer : 0 0
blk: queue f76eca18, I/O limit 4095Mb (mask 0xffffffff)
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
Vendor: COMPAQ Model: DLT8000 Rev: 011A
Type: Sequential-Access ANSI SCSI revision: 02
Starting timer : 0 0
blk: queue f76ec818, I/O limit 4095Mb (mask 0xffffffff)
Starting timer : 0 0
HP CISS Driver (v 2.4.47.RH1)
cciss: Device 0xb060 has been found at bus 3 dev 5 func 0
blocks= 35551845 block_size= 512
heads= 255, sectors= 63, cylinders= 2213 RAID 1(0+1)

blocks= 106683840 block_size= 512
heads= 255, sectors= 32, cylinders= 13074 RAID 5

blk: queue c04f99a0, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
cciss/c0d0: p1 p2 p3 p4 < p5 p6 p7 p8 >
cciss/c0d1: p1 p2 p3
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 224k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,2), internal journal
Adding Swap: 3068372k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,19), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,18), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,17), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 6, lun 0
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
inserting floppy driver for 2.4.21-4.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
Intel(R) PRO/100 Network Driver - version 2.3.13-k1-1
Copyright (c) 2003 Intel Corporation

divert: allocating divert_blk for eth0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled

divert: freeing divert_blk for eth0
ip_tables: (C) 2000-2002 Netfilter core team
Intel(R) PRO/100 Network Driver - version 2.3.13-k1-1
Copyright (c) 2003 Intel Corporation

divert: allocating divert_blk for eth0
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled

ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0 NIC Link is Up 100 Mbps Half duplex
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
mtrr: Serverworks LE detected. Write-combining disabled.
mtrr: your processor doesn't support write-combining
mtrr: Serverworks LE detected. Write-combining disabled.
mtrr: your processor doesn't support write-combining
mice: PS/2 mouse device common for all mice
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
ide-floppy driver 0.99.newide
hda: attached ide-cdrom driver.
hda: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
st0: Block limits 2 - 16777214 bytes.
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
hw tcp v4 csum failed
st0: Error with sense data: Info fld=0x8000, Current st09:00: sense key Medium Error
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
st0: Error with sense data: Info fld=0x1, Current st09:00: sense key Medium Error
st0: Error on write filemark.
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
hw tcp v4 csum failed
st0: Error with sense data: Current st09:00: sense key Not Ready
Additional sense indicates Logical unit not ready,initializing cmd. required
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
st0: Error with sense data: Current st09:00: sense key Not Ready
Additional sense indicates Logical unit not ready,initializing cmd. required
st0: Error on write filemark.
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
st0: Error with sense data: Current st09:00: sense key Not Ready
Additional sense indicates Logical unit not ready,initializing cmd. required
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)
st0: Failed to read 32768 byte block with 512 byte read.
sym53c1510D-0-<6,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset 15)