LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
Reload this Page [SOLVED] Digital sound seen but analog not to be found
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 04-05-2021, 09:33 AM   #1
abejarano
Member
 
Registered: May 2006
Distribution: Kubuntu
Posts: 98

Rep: Reputation: 15
Digital sound seen but analog not to be found

Greets and thanks,

I found an answer at https://askubuntu.com/questions/6360...sound-settings

In Ubuntu 20.04 my Starship/Matisse motherboard sound chip was working but I installed the KDE desktop and the sound was not working in KDE so I went back to Gnome and sound is not working in Gnome now. The problems seems to have something to do with the fact that in the sound applet in settings only the digital sound is available for the Starship/Matisse chip and the analog setting is not available.


$ lspci |grep -i audio
09:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
0b:00.4 Audio device: Advanced Micro Devices, Inc. [AMD] Starship/Matisse HD Audio Controller


Code:
With music playing in Deepin 

$ aplay -Ll
default
    Playback/recording through the PulseAudio sound server
surround21
    2.1 Surround output to Front and Subwoofer speakers
surround40
    4.0 Surround output to Front and Rear speakers
surround41
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50
    5.0 Surround output to Front, Center and Rear speakers
surround51
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
null
    Discard all samples (playback) or generate zero samples (capture)
samplerate
    Rate Converter Plugin Using Samplerate Library
speexrate
    Rate Converter Plugin Using Speex Resampler
jack
    JACK Audio Connection Kit
oss
    Open Sound System
pulse
    PulseAudio Sound Server
upmix
    Plugin for channel upmix (4,6,8)
vdownmix
    Plugin for channel downmix (stereo) with a simple spacialization
hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=1
    HDA ATI HDMI, HDMI 1
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=2
    HDA ATI HDMI, HDMI 2
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 3
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=4
    HDA ATI HDMI, HDMI 4
    HDMI Audio Output
hdmi:CARD=HDMI,DEV=5
    HDA ATI HDMI, HDMI 5
    HDMI Audio Output
dmix:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 0
    Direct sample mixing device
dmix:CARD=HDMI,DEV=7
    HDA ATI HDMI, HDMI 1
    Direct sample mixing device
dmix:CARD=HDMI,DEV=8
    HDA ATI HDMI, HDMI 2
    Direct sample mixing device
dmix:CARD=HDMI,DEV=9
    HDA ATI HDMI, HDMI 3
    Direct sample mixing device
dmix:CARD=HDMI,DEV=10
    HDA ATI HDMI, HDMI 4
    Direct sample mixing device
dmix:CARD=HDMI,DEV=11
    HDA ATI HDMI, HDMI 5
    Direct sample mixing device
dsnoop:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 0
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=7
    HDA ATI HDMI, HDMI 1
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=8
    HDA ATI HDMI, HDMI 2
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=9
    HDA ATI HDMI, HDMI 3
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=10
    HDA ATI HDMI, HDMI 4
    Direct sample snooping device
dsnoop:CARD=HDMI,DEV=11
    HDA ATI HDMI, HDMI 5
    Direct sample snooping device
hw:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 0
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=7
    HDA ATI HDMI, HDMI 1
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=8
    HDA ATI HDMI, HDMI 2
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=9
    HDA ATI HDMI, HDMI 3
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=10
    HDA ATI HDMI, HDMI 4
    Direct hardware device without any conversions
hw:CARD=HDMI,DEV=11
    HDA ATI HDMI, HDMI 5
    Direct hardware device without any conversions
plughw:CARD=HDMI,DEV=3
    HDA ATI HDMI, HDMI 0
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=7
    HDA ATI HDMI, HDMI 1
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=8
    HDA ATI HDMI, HDMI 2
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=9
    HDA ATI HDMI, HDMI 3
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=10
    HDA ATI HDMI, HDMI 4
    Hardware device with all software conversions
plughw:CARD=HDMI,DEV=11
    HDA ATI HDMI, HDMI 5
    Hardware device with all software conversions
usbstream:CARD=HDMI
    HDA ATI HDMI
    USB Stream Output
sysdefault:CARD=Generic
    HD-Audio Generic, ALC1220 Analog
    Default Audio Device
front:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    Front speakers
surround21:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Digital
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    Direct sample mixing device
dmix:CARD=Generic,DEV=1
    HD-Audio Generic, ALC1220 Digital
    Direct sample mixing device
dsnoop:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    Direct sample snooping device
dsnoop:CARD=Generic,DEV=1
    HD-Audio Generic, ALC1220 Digital
    Direct sample snooping device
hw:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    Direct hardware device without any conversions
hw:CARD=Generic,DEV=1
    HD-Audio Generic, ALC1220 Digital
    Direct hardware device without any conversions
plughw:CARD=Generic,DEV=0
    HD-Audio Generic, ALC1220 Analog
    Hardware device with all software conversions
plughw:CARD=Generic,DEV=1
    HD-Audio Generic, ALC1220 Digital
    Hardware device with all software conversions
usbstream:CARD=Generic
    HD-Audio Generic
    USB Stream Output
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC1220 Analog [ALC1220 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALC1220 Digital [ALC1220 Digital]
  Subdevices: 0/1
  Subdevice #0: subdevice #0
Code:
$ pacmd list-cards
2 card(s) available.
    index: 0
	name: <alsa_card.pci-0000_09_00.1>
	driver: <module-alsa-card.c>
	owner module: 7
	properties:
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfce60000 irq 81"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:09:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aaf0"
		device.product.name = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]"
		device.string = "0"
		device.description = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
		output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
		output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
		output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
		output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
		output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
		output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: unknown)
		output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
		output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
		output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (priority 5700, available: no)
		output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (priority 600, available: no)
		output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (priority 600, available: no)
		off: Off (priority 0, available: unknown)
	active profile: <output:hdmi-stereo-extra3>
	sinks:
		alsa_output.pci-0000_09_00.1.hdmi-stereo-extra3/#0: Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] Digital Stereo (HDMI 4)
	sources:
		alsa_output.pci-0000_09_00.1.hdmi-stereo-extra3.monitor/#0: Monitor of Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] Digital Stereo (HDMI 4)
	ports:
		hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "U28H75x"
		hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
		hdmi-output-5: HDMI / DisplayPort 6 (priority 5400, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "video-display"
    index: 1
	name: <alsa_card.pci-0000_0b_00.4>
	driver: <module-alsa-card.c>
	owner module: 8
	properties:
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfca00000 irq 83"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:0b:00.4"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.string = "1"
		device.description = "Starship/Matisse HD Audio Controller"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	profiles:
		input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
		output:analog-stereo: Analog Stereo Output (priority 6500, available: no)
		output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: no)
		output:analog-surround-21: Analog Surround 2.1 Output (priority 1300, available: no)
		output:analog-surround-21+input:analog-stereo: Analog Surround 2.1 Output + Analog Stereo Input (priority 1365, available: no)
		output:analog-surround-40: Analog Surround 4.0 Output (priority 1200, available: no)
		output:analog-surround-40+input:analog-stereo: Analog Surround 4.0 Output + Analog Stereo Input (priority 1265, available: no)
		output:analog-surround-41: Analog Surround 4.1 Output (priority 1300, available: no)
		output:analog-surround-41+input:analog-stereo: Analog Surround 4.1 Output + Analog Stereo Input (priority 1365, available: no)
		output:analog-surround-50: Analog Surround 5.0 Output (priority 1200, available: no)
		output:analog-surround-50+input:analog-stereo: Analog Surround 5.0 Output + Analog Stereo Input (priority 1265, available: no)
		output:analog-surround-51: Analog Surround 5.1 Output (priority 1300, available: no)
		output:analog-surround-51+input:analog-stereo: Analog Surround 5.1 Output + Analog Stereo Input (priority 1365, available: no)
		output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
		output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5565, available: unknown)
		off: Off (priority 0, available: unknown)
	active profile: <output:iec958-stereo+input:analog-stereo>
	sinks:
		alsa_output.pci-0000_0b_00.4.iec958-stereo/#1: Starship/Matisse HD Audio Controller Digital Stereo (IEC958)
	sources:
		alsa_output.pci-0000_0b_00.4.iec958-stereo.monitor/#1: Monitor of Starship/Matisse HD Audio Controller Digital Stereo (IEC958)
		alsa_input.pci-0000_0b_00.4.analog-stereo/#2: Starship/Matisse HD Audio Controller Analog Stereo
	ports:
		analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "audio-input-microphone"
		analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
			properties:
				
		analog-output-lineout: Line Out (priority 9000, latency offset 0 usec, available: no)
			properties:
				
		analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
			properties:
				device.icon_name = "audio-headphones"
		iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:

Code:
$ pacmd list-sinks
2 sink(s) available.
    index: 0
	name: <alsa_output.pci-0000_09_00.1.hdmi-stereo-extra3>
	driver: <module-alsa-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE
	priority: 9030
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 0.00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 0
	linked by: 0
	configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
	card: 0 <alsa_card.pci-0000_09_00.1>
	module: 7
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "HDMI 3"
		alsa.id = "HDMI 3"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "9"
		alsa.card = "0"
		alsa.card_name = "HDA ATI HDMI"
		alsa.long_card_name = "HDA ATI HDMI at 0xfce60000 irq 81"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:09:00.1"
		sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:09:00.1/sound/card0"
		device.bus = "pci"
		device.vendor.id = "1002"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
		device.product.id = "aaf0"
		device.product.name = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]"
		device.string = "hdmi:0,3"
		device.buffering.buffer_size = "352768"
		device.buffering.fragment_size = "176384"
		device.access_mode = "mmap+timer"
		device.profile.name = "hdmi-stereo-extra3"
		device.profile.description = "Digital Stereo (HDMI 4)"
		device.description = "Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590] Digital Stereo (HDMI 4)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)
			properties:
				device.icon_name = "video-display"
				device.product.name = "U28H75x"
	active port: <hdmi-output-3>
  * index: 1
	name: <alsa_output.pci-0000_0b_00.4.iec958-stereo>
	driver: <module-alsa-card.c>
	flags: HARDWARE HW_MUTE_CTRL DECIBEL_VOLUME LATENCY 
	state: RUNNING
	suspend cause: (none)
	priority: 9038
	volume: front-left: 45876 /  70% / -9.29 dB,   front-right: 45876 /  70% / -9.29 dB
	        balance 0.00
	base volume: 65536 / 100% / 0.00 dB
	volume steps: 65537
	muted: no
	current latency: 100.86 ms
	max request: 17 KiB
	max rewind: 17 KiB
	monitor source: 1
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	used by: 1
	linked by: 1
	fixed latency: 100.14 ms
	card: 1 <alsa_card.pci-0000_0b_00.4>
	module: 8
	properties:
		alsa.resolution_bits = "16"
		device.api = "alsa"
		device.class = "sound"
		alsa.class = "generic"
		alsa.subclass = "generic-mix"
		alsa.name = "ALC1220 Digital"
		alsa.id = "ALC1220 Digital"
		alsa.subdevice = "0"
		alsa.subdevice_name = "subdevice #0"
		alsa.device = "1"
		alsa.card = "1"
		alsa.card_name = "HD-Audio Generic"
		alsa.long_card_name = "HD-Audio Generic at 0xfca00000 irq 83"
		alsa.driver_name = "snd_hda_intel"
		device.bus_path = "pci-0000:0b:00.4"
		sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:0b:00.4/sound/card1"
		device.bus = "pci"
		device.vendor.id = "1022"
		device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
		device.product.id = "1487"
		device.product.name = "Starship/Matisse HD Audio Controller"
		device.string = "iec958:1"
		device.buffering.buffer_size = "17664"
		device.buffering.fragment_size = "2944"
		device.access_mode = "mmap"
		device.profile.name = "iec958-stereo"
		device.profile.description = "Digital Stereo (IEC958)"
		device.description = "Starship/Matisse HD Audio Controller Digital Stereo (IEC958)"
		module-udev-detect.discovered = "1"
		device.icon_name = "audio-card-pci"
	ports:
		iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <iec958-stereo-output>
Code:
$ pacmd list-sink-inputs
1 sink input(s) available.
    index: 15
	driver: <protocol-native.c>
	flags: START_CORKED 
	state: RUNNING
	sink: 1 <alsa_output.pci-0000_0b_00.4.iec958-stereo>
	volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB
	        balance 0.00
	muted: no
	current latency: 109.52 ms
	requested latency: 100.14 ms
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Stereo
	resample method: (null)
	module: 12
	client: 29 <Deepin Music>
	properties:
		media.name = "'Menuet Antique' by 'Ravel, Maurice'"
		application.name = "Deepin Music"
		native-protocol.peer = "UNIX socket client"
		native-protocol.version = "33"
		application.process.id = "9893"
		application.process.user = "anton"
		application.process.host = "antonRx"
		application.process.binary = "deepin-music"
		application.language = "en_US.UTF-8"
		window.x11.display = ":0"
		application.process.machine_id = "2d76c364b84d4fbbac775a23d2550b9a"
		application.icon_name = "deepin-music"
		module-stream-restore.id = "sink-input-by-application-name:Deepin Music"
		media.title = "Menuet Antique"
		media.artist = "Ravel, Maurice"
Code:
 sudo  fuser -v /dev/snd/*
                     USER        PID ACCESS COMMAND
/dev/snd/controlC0:  anton      1444 F.... pulseaudio
                     root      10307 F.... pulseaudio
/dev/snd/controlC1:  anton      1444 F.... # autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
/dev/snd/pcmC1D1p:   anton      1444 F...m pulseaudio
/dev/snd/timer:      anton      1444 f.... pulseaudio
alsa-base.conf contents are:

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7

# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; }

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2 inxi -SMA
System:
Host: antonRx Kernel: 5.8.0-48-generic x86_64 bits: 64
Desktop: Gnome 3.36.7 Distro: Ubuntu 20.04.2 LTS (Focal Fossa)
Machine:
Type: Desktop Mobo: ASUSTeK model: ROG STRIX B450-F GAMING v: Rev 1.xx
serial: 200873869400453 UEFI: American Megatrends v: 4202 date: 01/15/2021
Audio:
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
driver: snd_hda_intel
Device-2: AMD Starship/Matisse HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k5.8.0-48-generic

# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2

inxi -SMA
System:
Host: antonRx Kernel: 5.8.0-48-generic x86_64 bits: 64
Desktop: Gnome 3.36.7 Distro: Ubuntu 20.04.2 LTS (Focal Fossa)
Machine:
Type: Desktop Mobo: ASUSTeK model: ROG STRIX B450-F GAMING v: Rev 1.xx
serial: 200873869400453 UEFI: American Megatrends v: 4202 date: 01/15/2021
Audio:
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
driver: snd_hda_intel
Device-2: AMD Starship/Matisse HD Audio driver: snd_hda_intel
Sound Server: ALSA v: k5.8.0-48-generic
Last edited by abejarano; 04-06-2021 at 12:47 PM. Reason: add informaition
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
[SOLVED] No package 'x11' found No package 'xext' found No package 'xdamage' found No package 'xfixes' found No package 'x11-xcb' found Jigsaw Linux From Scratch 14 02-23-2021 09:35 PM
Desktop Ubuntu 18.04, digital audio, but no analog. Asus MB w/ALC883 on board card. dwbrayton Linux - Desktop 2 10-22-2018 10:26 PM
Desktop Ubuntu 18.04, digital audio, but no analog. Asus MB w/ALC883 on board card. dwbrayton Linux - Newbie 2 10-18-2018 09:28 PM
Analog output stopped working after first time playing digital sound in FC6/Audigy sippykup Linux - General 1 01-28-2007 03:35 AM
How to get both Analog and Digital sound at the same time tho_x_tran Linux - Hardware 1 08-12-2004 09:29 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 08:49 AM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration