LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Digital Out for Sound Blaster Platium (https://www.linuxquestions.org/questions/linux-hardware-18/digital-out-for-sound-blaster-platium-28700/)

sonikntails 08-24-2002 12:58 PM

Digital Out for Sound Blaster Platium
 
Is there any easy way for me to enable digital out on my soundblaster live card? I triend compiling the external drivers for emu10k1 but it never works. There is built in support into the kernel for the emu10k1, but how do i make it use the digital out port??? Thanks yall!

sonik

MasterC 08-24-2002 10:55 PM

see The FAQ from the Creative Opensource website. The skinny:
edit a file, and choose yes. Which file, I cannot remember, but it will tell you on the website if you poke around. There is other very good info, otherwise I would just find it and tell you, but you really should read around a bit, very good info there for you.

Cool

anccert 04-03-2003 10:41 AM

Make sure you have the emu-tools installed.
<http://sourceforge.net/projects/emu10k1>

In Redhat 8.0 I believe the file emu10k1.conf in located in /usr/local/etc. Change <USE_DIGITAL_OUTPUT=no> to <USE_DIGITAL_OUTPUT=yes>.

If you want to load the emu-script on startup add these lines to /etc/modules.conf.

#Loads script on startup
post-install emu10k1 /usr/local/etc/emu-script
#Saves mixer levels
post-install emu10k1 /usr/local/etc/emu-script restore
pre-remove emu10k1 /usr/local/etc/emu-script save

Electro 04-03-2003 08:02 PM

Download ALSA and install it. Then read information on asoundrc at ALSA. Also there is example asoundrc scripts that comes with ALSA. I think the example scripts are located in /usr/share/alsa/pcm.

ALSA has also support for OSS programs.


All times are GMT -5. The time now is 08:03 AM.