Quote:
[edit]Wait, maybe you were talking about which PCI slot to install in (my response above was regarding the PCIe x1 and x16 slots). Regarding the standard PCI slots, you can install whatever you want into either one.[/edit] |
Quote:
|
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
What you would be think of haertig is dual channel memory, which is on pretty much everything from the last 5-7 years. You will only get single channel memory if you install odd numbers of RAM sticks.....but it will work. No, the manual does NOT cover memory type or speed required. It just gives you a rather useless url. Ztcoracat- you are doing things the hard way, and getting ahead of yourself as well. Cheap advice- Opening a case will not cause any issues (apart from possibly breaking 'warranty seals' or stuff like that which dont matter). Dont trust software if you can check hardware. Dont race ahead- make sure you have the correct model number for your board, then check the manufacturers website for the technical specs. If you are going to use a forum for advice, including all relevant info is by far the best idea.... To use the current situation, you seem to want to put more RAM in as well as install a wireless card. Well, maybe you can, maybe you cant. We need to know the exact motherboard model (dont trust MS-XXXX numbers, I've seen them be wrong in the past.....which is one reason why I always check with eyeballs). Also- how much RAM you already have installed, how those sticks are laid out (e.g 2 x 2GB or 4 x 1GB), current RAM speed.... |
Quote:
Quote:
Here's what the manufacturer that made my system put in an illustration. This is my exact tower. I'm going to give them a call if I have trouble opening the case- ZT Systems http://www.ztsystems.com/Default.aspx?tabid=1461 Quote:
Heed taken- I have a large wood table to clear off that I plan on using to put the tower on. It's covered with wrapping paper but that shouldn't matter; right- And the floor is solid wood so no carpet to generate any static charge- Is there anything else I need to keep in mind once that case is open and all the hardware is exposed? Never done this before and I have to trust you cascade as I do not have any other help. (a friend has offered to help but he's never cracked open a case either) Unless I want to pay a tech and that can get pretty pricey-- |
Quote:
|
Thanks, haertig--
I will err on the side of caution and use a static kit to be on the safe side. I'd rather be safe than sorry. I wouldn't want to build a new system or have to purchase a new Desktop. Quote:
Taking my time with this and sitting back and thinking now before I do anything- |
Update:
I'm not an expert with wireless but my WUSB54gc Linksys USB Adapter that communicates with my wireless modem down the hall is failing. For the last 3-5 weeks I have been online and suddenly loose my internet connection. I grew tired of that and went to the computer store today. I purchased a Netis WF-2113 300 Mbps Wireless-N PCI-E Adapter for my Desktop today. http://www.microcenter.com/product/3...chable_Antenna I took a picture of my motherboard with me to show the tech what I have. The tech that builds Desktops took me to the side, opened a tower and personally showed me where and how to install the card. Before leaving I asked a Manager that if I can not install it correctly or if I do successfully install it and it doesn't work could I bring it back. The Manager confirmed yes I can bring the PCI card back but within 30 days. The Computer Tech confirmed that if I can not install the card correctly they could for a fee. He also confirmed that there is a disc in the box with drivers on it. I hope the driver works for Debian as that is my primary OS on the Desktop. I only use Win's XP once every few months- Cascade and Haertig: I have taken heed to what you both have taught me; Thank You! Still a tad nervous to proceed. However, I need to proceed as the connection keeps failing and I can't have that:- I've planned a day (maybe Tuesday) next week to install the card. |
Quote:
|
Quote:
If the WiFi card that you just bought comes with drivers, no doubt those are drivers for Windows, not for Linux. Chances are you can find something in Linux that will support your new card, but it probably won't come from the manufacturer of the card though. |
Quote:
|
Quote:
Not sure about my neighbor (router?) but his/her wireless connections shows in my Network Manager when I look. Yes, I have 2 other computers in my house that stay connected to the wireless connection via the internal card that's in them and the wireless modem is good. I don't have a router-- The signal strength to the Desktop that I am using that adapter with is 97% but that fluctuates all the time on and off. All four bars that show my connection are not always colored in sometimes only 2 bars. To get it working again I have to re-boot Debian after the 'Authentication For Wireless' and the password is typed in 3 times. After the 3rd try sometimes it re-connects and sometimes I have to re-boot-- I'll start looking for a Linux driver today or tomorrow for the card. Not sure what to Google but I'm not giving up yet- |
BTW, that Linksys adapter is about 3-4 years old and maybe age is why it's failing.
My laptop is in the same room as the Desktop and it never looses the wireless connection. The Toshiba laptop down the hall in the other room never losses it's wireless connection and my Sony Playstation stays online w/o fail as well. The Tech mentioned in passing that he just recently suggested this exact same card for another customer running Linux and that Linux user has not complained to the Tech as of yet- I'm thinking it can't hurt to install the new wireless PCI card. ;) Worse case; it doesn't work and I get a full refund from Micro Center:- |
Agreed. With the additional info you provided, I'd say the USB WiFi adapter is the most likely culpret.
|
I'll install the card next week and let you know how it goes.
Hope I can find a Linux driver for it-- Code:
ztcoracat@:~$ uname -a Quote:
Or this is the right driver: 2.6 kernel: Fedora Core, Debian, Mandriva, Open SUSE, Gentoo, http://www.wireless-driver.com/realt...river-ver0019/ Driver's aren't easy to find or at least it's a tad confusing-- |
Scratch that last post.
I found the driver. It's a zip sitting in my Downloads folder- Quote:
Have the weekend to figure out what to do after I unzip/extract the driver. Running Debian I should be able to use 'apt' to install the driver- |
All times are GMT -5. The time now is 01:50 AM. |