LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 06-09-2006, 01:15 AM   #1
beosmr.x
LQ Newbie
 
Registered: Jan 2005
Posts: 18

Rep: Reputation: 0
Question /dev/hda3 mounting and partition issues


uname -r
Kernel 2.6.15-22-386

/sbin/lsmod
Module Size Used by
binfmt_misc 11144 1
video 16260 0
thermal 13576 0
tc1100_wmi 6916 0
sony_acpi 5516 0
processor 23360 1 thermal
pcc_acpi 12416 0
hotkey 11556 0
fan 4868 0
dev_acpi 11140 0
container 4608 0
button 6672 0
acpi_sbs 19980 0
battery 9988 1 acpi_sbs
i2c_acpi_ec 5120 1 acpi_sbs
i2c_core 19984 1 i2c_acpi_ec
ac 5252 1 acpi_sbs
psmouse 32772 0
ndiswrapper 156628 0
dm_mod 52152 1
md_mod 64084 0
yenta_socket 25356 0
rsrc_nonstatic 12288 1 yenta_socket
pcmcia 36668 0
pcmcia_core 38672 3 yenta_socket,rsrc_nonstatic,pcmcia
af_packet 21000 4
tsdev 7360 0
snd_intel8x0 30620 1
snd_ac97_codec 83232 1 snd_intel8x0
snd_ac97_bus 2304 1 snd_ac97_codec
snd_pcm_oss 46368 0
snd_mixer_oss 16896 1 snd_pcm_oss
pcspkr 2052 0
usblp 11904 0
snd_pcm 79880 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 22660 1 snd_pcm
snd 50276 8 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9568 1 snd
snd_page_alloc 10248 2 snd_intel8x0,snd_pcm
serio_raw 6916 0
e100 36356 0
mii 5376 1 e100
sworks_agp 8864 0
amd_k7_agp 8204 0
ali_agp 6656 0
sis_agp 8452 0
ati_agp 8332 0
nvidia_agp 7964 0
via_agp 9600 0
intel_agp 21276 1
rtc 12468 0
hw_random 5396 0
agpgart 31816 8 sworks_agp,amd_k7_agp,ali_agp,sis_agp,ati_agp,nvidia_agp,via_agp,intel_agp
shpchp 40384 0
pci_hotplug 26164 1 shpchp
uhci_hcd 29328 0
evdev 9088 1
cloop 12640 1

/sbin/lspci is not available on MEPIS live cd.

[/code]dmesg
[4294667.296000] Linux version 2.6.15-22-386 (root@mepis-party) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Wed May 3 09:35:47 EDT 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
[4294667.296000] BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
[4294667.296000] BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 130880
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126784 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f7470
[4294667.296000] ACPI: RSDT (v001 INTEL D845GRG 0x20020412 MSFT 0x00000097) @ 0x1ff40000
[4294667.296000] ACPI: FADT (v002 INTEL D845GRG 0x20020412 MSFT 0x00000097) @ 0x1ff40200
[4294667.296000] ACPI: MADT (v001 INTEL D845GRG 0x20020412 MSFT 0x00000097) @ 0x1ff40300
[4294667.296000] ACPI: DSDT (v001 INTEL D845GRG 0x0000010a MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:2 APIC version 20
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: xres=1024x768 us init=/etc/init apm=power-off vga=791 quiet
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1799.966 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour dummy device 80x25
[4294667.563000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.564000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.581000] Memory: 513668k/523520k available (2638k kernel code, 9268k reserved, 960k data, 192k init, 0k highmem)
[4294667.581000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.641000] Calibrating delay using timer specific routine.. 3602.22 BogoMIPS (lpj=1801111)
[4294667.641000] Security Framework v1.0.0 initialized
[4294667.641000] SELinux: Disabled at boot.
[4294667.641000] Capability LSM initialized
[4294667.641000] Mount-cache hash table entries: 512
[4294667.641000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.641000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.641000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294667.641000] CPU: L2 cache: 512K
[4294667.641000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[4294667.641000] mtrr: v2.0 (20020519)
[4294667.641000] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
[4294667.641000] Enabling fast FPU save and restore... done.
[4294667.641000] Enabling unmasked SIMD FPU exception support... done.
[4294667.641000] Checking 'hlt' instruction... OK.
[4294667.645000] checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
[4294667.676000] Freeing initrd memory: 144k freed
[4294667.677000] ACPI: Looking for DSDT ... not found!
[4294667.680000] ENABLING IO-APIC IRQs
[4294667.680000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294667.791000] NET: Registered protocol family 16
[4294667.791000] ACPI: bus type pci registered
[4294667.791000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[4294667.791000] PCI: Using configuration type 1
[4294667.792000] ACPI: Subsystem revision 20051216
[4294667.798000] ACPI: Interpreter enabled
[4294667.798000] ACPI: Using IOAPIC for interrupt routing
[4294667.798000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294667.798000] PCI: Probing PCI hardware (bus 00)
[4294667.801000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[4294667.801000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[4294667.801000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294667.801000] Boot video device is 0000:01:00.0
[4294667.801000] PCI: Transparent bridge - 0000:00:1e.0
[4294667.801000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294667.803000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[4294667.805000] ACPI: Power Resource [URP1] (off)
[4294667.805000] ACPI: Power Resource [FDDP] (off)
[4294667.805000] ACPI: Power Resource [LPTP] (off)
[4294667.808000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294667.809000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294667.809000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[4294667.810000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294667.810000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[4294667.811000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294667.811000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[4294667.812000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[4294667.812000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294667.812000] pnp: PnP ACPI init
[4294667.816000] pnp: PnP ACPI: found 10 devices
[4294667.816000] PnPBIOS: Disabled by ACPI PNP
[4294667.816000] SCSI subsystem initialized
[4294667.816000] usbcore: registered new driver usbfs
[4294667.816000] usbcore: registered new driver hub
[4294667.816000] PCI: Using ACPI for IRQ routing
[4294667.816000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294667.822000] pnp: 00:08: ioport range 0x400-0x47f could not be reserved
[4294667.822000] pnp: 00:08: ioport range 0x680-0x6ff has been reserved
[4294667.822000] pnp: 00:08: ioport range 0x480-0x4bf has been reserved
[4294667.822000] PCI: Bridge: 0000:00:01.0
[4294667.822000] IO window: disabled.
[4294667.822000] MEM window: fc900000-fe9fffff
[4294667.822000] PREFETCH window: f0600000-f46fffff
[4294667.822000] PCI: Bridge: 0000:00:1e.0
[4294667.822000] IO window: d000-dfff
[4294667.822000] MEM window: fea00000-feafffff
[4294667.822000] PREFETCH window: f4700000-f47fffff
[4294667.822000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294667.824000] audit: initializing netlink socket (disabled)
[4294667.824000] audit(1154900366.823:1): initialized
[4294667.824000] VFS: Disk quotas dquot_6.5.1
[4294667.824000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294667.824000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294667.824000] NTFS driver 2.1.25 [Flags: R/W].
[4294667.824000] Registering unionfs 1.1.2
[4294667.824000] Initializing Cryptographic API
[4294667.824000] io scheduler noop registered
[4294667.824000] io scheduler anticipatory registered
[4294667.824000] io scheduler deadline registered
[4294667.824000] io scheduler cfq registered
[4294667.824000] vesafb: framebuffer at 0xf2000000, mapped to 0xe0880000, using 3072k, total 4096k
[4294667.824000] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[4294667.824000] vesafb: protected mode interface info at c000:04e0
[4294667.824000] vesafb: scrolling: redraw
[4294667.824000] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[4294667.824000] vesafb: Mode is VGA compatible
[4294667.914000] Console: switching to colour frame buffer device 128x48
[4294667.914000] fb0: VESA VGA frame buffer device
[4294667.914000] isapnp: Scanning for PnP cards...
[4294668.228000] isapnp: No Plug & Play device found
[4294668.248000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[4294668.250000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.250000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.251000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.253000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.254000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.254000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.254000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[4294668.254000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294668.254000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
[4294668.254000] ICH4: chipset revision 1
[4294668.254000] ICH4: not 100% native mode: will probe irqs later
[4294668.254000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hdaMA, hdbio
[4294668.254000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddio
[4294668.254000] Probing IDE interface ide0...
[4294668.518000] hda: Maxtor 6B200R0, ATA DISK drive
[4294669.131000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294669.131000] Probing IDE interface ide1...
[4294669.803000] hdc: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
[4294670.415000] ide1 at 0x170-0x177,0x376 on irq 15
[4294670.416000] hda: max request size: 1024KiB
[4294670.436000] hda: 398297088 sectors (203928 MB) w/16384KiB Cache, CHS=24792/255/63, UDMA(100)
[4294670.438000] hda: cache flushes supported
[4294670.438000] hda: hda1 hda2 hda3
[4294670.442000] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294670.442000] Uniform CD-ROM driver Revision: 3.20
[4294670.452000] ACPI: bus type scsi registered
[4294670.452000] libata version 1.20 loaded.
[4294670.452000] Driver 'sd' needs updating - please use bus_type methods
[4294670.452000] ieee1394: Initialized config rom entry `ip1394'
[4294670.452000] ieee1394: raw1394: /dev/raw1394 device initialized
[4294670.452000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294670.452000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294670.452000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294670.452000] usbmon: debugfs is not available
[4294670.452000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 177
[4294670.453000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294670.453000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294670.453000] ehci_hcd 0000:00:1d.7: debug port 1
[4294670.453000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294670.453000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[4294670.453000] ehci_hcd 0000:00:1d.7: irq 177, io mem 0xfebffc00
[4294670.457000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294670.457000] hub 1-0:1.0: USB hub found
[4294670.457000] hub 1-0:1.0: 6 ports detected
[4294670.558000] Initializing USB Mass Storage driver...
[4294670.558000] usbcore: registered new driver usb-storage
[4294670.558000] USB Mass Storage support registered.
[4294670.558000] mice: PS/2 mouse device common for all mice
[4294670.558000] NET: Registered protocol family 2
[4294670.567000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
[4294670.567000] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.567000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.567000] TCP: Hash tables configured (established 32768 bind 32768)
[4294670.567000] TCP reno registered
[4294670.567000] ip_tables: (C) 2000-2002 Netfilter core team
[4294670.576000] TCP bic registered
[4294670.576000] NET: Registered protocol family 1
[4294670.576000] NET: Registered protocol family 8
[4294670.576000] NET: Registered protocol family 20
[4294670.576000] Using IPI Shortcut mode
[4294670.576000] ACPI wakeup devices:
[4294670.576000] P0P1 PS2K USB0 USB1 USB2 USB3 AC97 SLPB
[4294670.576000] ACPI: (supports S0 S1 S3 S4 S5)
[4294670.576000] RAMDISK: Compressed image found at block 0
[4294670.591000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.614000] EXT2-fs warning: checktime reached, running e2fsck is recommended
[4294670.614000] VFS: Mounted root (ext2 filesystem).
[4294670.630000] Unable to identify CD-ROM format.
[4294670.634000] VFS: Can't find ext3 filesystem on dev hda.
[4294670.634000] VFS: Can't find an ext2 filesystem on dev hda.
[4294670.640000] ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda
[4294670.641000] FAT: bogus number of FAT structure
[4294670.641000] VFS: Can't find a valid FAT filesystem on dev hda.
[4294670.685000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294670.700000] ISO 9660 Extensions: RRIP_1991A
[4294670.718000] cloop: Initializing cloop v2.02
[4294670.719000] cloop: loaded (max 8 devices)
[4294670.830000] cloop: /cdrom/linux/linux: 27281 blocks, 65536 bytes/block, largest block is 65562 bytes.
[4294671.046000] ISO 9660 Extensions: RRIP_1991A
[4294676.657000] Freeing unused kernel memory: 192k freed
[4294686.712000] USB Universal Host Controller Interface driver v2.3
[4294686.712000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185
[4294686.712000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294686.712000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294686.712000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[4294686.712000] uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000e800
[4294686.713000] hub 2-0:1.0: USB hub found
[4294686.713000] hub 2-0:1.0: 2 ports detected
[4294686.814000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
[4294686.814000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294686.814000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294686.814000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[4294686.814000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000e880
[4294686.814000] hub 3-0:1.0: USB hub found
[4294686.814000] hub 3-0:1.0: 2 ports detected
[4294686.844000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294686.915000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
[4294686.915000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294686.915000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294686.915000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[4294686.915000] uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ec00
[4294686.915000] hub 4-0:1.0: USB hub found
[4294686.915000] hub 4-0:1.0: 2 ports detected
[4294687.016000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294687.071000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[4294687.104000] Linux agpgart interface v0.101 (c) Dave Jones
[4294687.140000] hw_random hardware driver 1.0.0 loaded
[4294687.163000] Real Time Clock Driver v1.12
[4294687.220000] agpgart: Detected an Intel 845G Chipset.
[4294687.224000] agpgart: AGP aperture is 64M @ 0xf8000000
[4294688.377000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[4294688.377000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294688.377000] ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 201
[4294688.403000] e100: eth0: e100_probe: addr 0xfeaff000, irq 201, MAC addr 00:03:47:FED:66
[4294689.564000] e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex
[4294689.696000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x107B
[4294689.696000] usbcore: registered new driver usblp
[4294689.696000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[4294689.747000] input: PC Speaker as /class/input/input1
[4294689.912000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 209
[4294689.912000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[4294689.932000] logips2pp: Detected unknown logitech mouse model 99
[4294689.994000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[4294690.018000] ts: Compaq touchscreen protocol output
[4294690.223000] intel8x0_measure_ac97_clock: measured 50158 usecs
[4294690.223000] intel8x0: clocking to 48000
[4294690.772000] NET: Registered protocol family 17
[4294692.167000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294692.167000] md: bitmap version 4.39
[4294692.552000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294693.227000] ndiswrapper version 1.8 loaded (preempt=yes,smp=no)
[4294693.305000] usbcore: registered new driver ndiswrapper
[4294697.705000] floppy0: no floppy controllers found
[4294697.962000] logips2pp: Detected unknown logitech mouse model 99
[4294698.024000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3
[4294701.320000] ACPI: Power Button (FF) [PWRF]
[4294701.321000] ACPI: Sleep Button (CM) [SLPB]
[4294701.469000] ibm_acpi: ec object not found
[4294701.498000] pcc_acpi: loading...
[4294701.524000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294820.310000] cdrom: hdc: mrw address space DMA selected
[4294832.328000] EXT3-fs: mounted filesystem with ordered data mode.
[4294832.339000] kjournald starting. Commit interval 5 seconds
[/code]

Symptoms:
MAndriva 2006 started straight to the command, many errors to do with lockfiles and also /dev/hda3 is somehow readonly and nothing can load, because of lockfile errors. Files cannot be modified or deleted. I can look at all the files but they cannot be modified. MEPIS HArddrake lists the partition has 'none' but there is something there it just can't see it properly. FS is ext3. Happend after I shut off the PC when Mandriva did not shut down fully. It has a problem were it locks at the blue screen with the X on shutdown and the proper path is not done to shut it down, so I have to press the power off button.

Here are my partitions
fdisk -l

Disk /dev/hda: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/hda1 1 9739 78228486 c W95 FAT32 (LBA)
/dev/hda2 * 9740 9752 104422+ 83 Linux
/dev/hda3 9753 24792 120808800 8e Linux LVM

I tested the HDD with Powermax 4.22 and the hdd came back perfect without any problem.

e2fsck -pvc /dev/hda3
e2fsck: Bad magic number in super-block while trying to open /dev/hda3
/dev/hda3:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>

I do tried the above block and 2 others but they did not work either. please help!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Error informing the kernel about modification to partition /dev/hda3 zillah Fedora 19 07-27-2007 05:27 AM
udev sometimes does not create dev/hda3 vdemuth Slackware 5 01-23-2006 02:46 PM
merging /dev/hda2 and /dev/hda3 aggiridharan Linux - General 2 01-06-2006 02:31 AM
mount -t ext3 /dev/hda3 /mnt/spare Cinematography Linux - General 1 05-12-2005 12:43 PM
I cannot see my /dev/hda3 on my desktop? shootingstar Linux - Newbie 1 03-06-2005 04:23 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 12:55 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration