Here's all the informations I've gathered about my new smartlink modem.

From windows:

It's set on COM6.
IRQ is 19.
I/O is at 0xB800/0xB8FF

I not sure if it's useful but in BIOS my Serial Port Address is set at: 0x3F8. IRQ4.

And in Linux I've did this command to find out about my IRQs - [lspci -v] it showed me this info about my modem.

It's I/O port is at: 0xB800
The IRQ is at 3.

Does that mean that my IRQ in Linux is not correct since in windows it's shows the IRQ19?

Any expert advices welcome...

P.S.: I've already posted a reply with this informations but I made a new post to make sure I got more answers.

ask google, Smartlink uses proprietary drivers which can be downloaded
from their Homepage,
and use the forum search and the "similary threads" at the bottom of the page.
maybe this will help:
http://www.linuxquestions.org/questi...d.php?t=182715

hth,
Flo

Their drivers gave me errors when I tried to compile them.

As follow:

I change my kernel path and did -make-
I use Fedora Core 4. Should I update my kernel?
It's 2.6.1-1.1369.

This is damn....