LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   detecting muvo n200 (https://www.linuxquestions.org/questions/linux-hardware-18/detecting-muvo-n200-335369/)

qbaza 06-20-2005 05:57 AM
detecting muvo n200
 
Hello, I would like to use my muvo (mp3player). I've compiled in kernel all things which are needed. But when I plug my muvo to USB I get a information (using dmesg):
Quote:
ehci_hcd 0000:00:10.3: GetStatus port 1 status 001000 POWER sig=se0
hub 1-0:1.0: state 5 ports 4 chg 0000 evt 0002
ehci_hcd 0000:00:10.3: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.3: port 1 high speed
ehci_hcd 0000:00:10.3: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using ehci_hcd and address 3
usb 1-1: hcd_unlink_urb ca43cde0 fail -16
And I don't konow what to do with this. I also have used another mass storage usb devices and everything was O.K. Can everyone help me ?
I was searching over all internet, and probably it is not a simply problem.

qbaza 06-20-2005 06:37 PM
I solved this problem. I didn't compiled in kernel ehci_usb. Now I can use mp3 player, but of course it doesn't use full speed (USB 2.0) during transfer and uses USB 1.0 driver (12Mb/s).


All times are GMT -5. The time now is 11:09 PM.