creative moodem proplem

marr · 07-21-2003, 04:37 PM

hi i am a newbie to linux and happy to be here with you fin people
i need help
i istallee rh9 successfuly but i cant connect to the interner
my modem is creative lab DI5630
isearched for adriver but failed
can u help
thankx

BlackMage · 07-21-2003, 04:41 PM

I didn't know that Creative™ made modems. To check if your modem is supported under Linux check http://www.linmodem.org/

Chances are it is not and you will need to buy a modem that is, or a hardware modem. Hardware modems tend to be external with a serial interface.

fancypiper · 07-21-2003, 04:45 PM

# Modem and connection troubleshooting
Modem NHFs
Modem HOWTO
Linmodems.org
Conexant/Rockwell modem HOWTO
The Unofficial PCTel Linux Driver page
I finaly got my PcTel hsp56 mr modem to work
Linux driver for Winmodems with Lucent Apollo (ISA) and Mars (PCI) chipsets
Lucent AMR modem listed as an Intel AC'97 - Smart Link Modems
The kppp Handbook
Dial-up Networking Configuration Using KDE's Kppp
Troubleshooting ISP Connection Problems
Connecting to AOL with Linux

# Configuring a pci modem
To configure a pci modem, open an x terminal and su - to the root account:

Code:

[phil@fancypiper phil]$ su -
Password: 
[root@fancypiper root]# cat /proc/pci

Look for your modem in the returned list. Look for something similar to mine:

Code:

  Bus  2, device   2, function  0:
    Communication controller: PCI device 151f:0000 (TOPIC SEMICONDUCTOR Corp) (rev 0).
      IRQ 5.
      I/O at 0xc400 [0xc407].

With this info, I use the setserial command:

Code:

[root@fancypiper root]# setserial /dev/ttyS2 irq 5 port 0xc400 uart 16550a

Then I test the modem with the internet connection wizard and it works. I edit /etc/rc.d/rc.local and enter the setserial command:

Code:

[root@fancypiper root]# pico -w /etc/rc.d/rc.local

My file for an example

Code:

#!/bin/sh
# Redhat /etc/rc.d/rc.local file
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local
# configure modem
setserial /dev/ttyS2 irq 5 port 0xc400 uart 16550a

Now, it remains configured after a reboot.

# Redhat links
RedHat Linux Manuals
Get your mp3 support here
Maximum RPM
rpmfind
Easier software management: apt4rpm - Red Carpet
RedHat 8.0 Tips & Tricks

# Redhat 7.3 down configuration commands
setup leads to several configuration tools

# Redhat 7.3 up configuration commands
Configure soundcard:
redhat-config-soundcard
Configure X server:
redhat-config-xfree86
Configure network:
redhat-config-network
Manage software:
redhat-config-packages

# Handling NTFS
New Technology FileSystem (NTFS) HOWTOs
Linux NTFS project

marr · 07-22-2003, 07:12 AM

thkx for your help